Kenwood KDC X592 Manual

The Kenwood KDC X592 is a high-performance car stereo receiver featuring Bluetooth connectivity, USB input, auxiliary input, CD playback, AM/FM tuner with 18FM/6AM presets, detachable faceplate security, 4-channel preamp outputs, and advanced audio controls. Below are key sections for features, installation, operation, settings, and troubleshooting.

Features at a Glance

Key components: Main unit with detachable faceplate, remote control, wiring harness, mounting sleeve, user manual.

Feature	Description
Bluetooth Connectivity	Wireless audio streaming and hands-free calling
USB Input	For connecting USB devices and charging
Auxiliary Input	3.5mm jack for external audio sources
CD Playback	Supports CD, CD-R, CD-RW formats
AM/FM Tuner	18 FM and 6 AM station presets
Detachable Faceplate	Security feature to prevent theft
4-Channel Preamp Outputs	For connecting external amplifiers
Audio Controls	Bass, treble, balance, fader adjustments
Display Dimmer	Adjustable display brightness
Remote Control	Full function remote included

Installation

Proper installation ensures optimal performance and safety.

1. Disconnect negative battery terminal before installation.
2. Connect wiring harness following color-coded wiring diagram.
3. Slide unit into mounting sleeve and secure with provided brackets.
4. Reconnect battery and test all functions.
5. Attach faceplate for normal operation.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts. Ensure proper grounding.

Basic Operation

Power on unit and follow initial setup procedures.

1. Power: Press POWER button to turn unit on/off.
2. Source Selection: Press SOURCE to cycle through available sources.
3. Volume Control: Turn VOLUME knob or use remote control buttons.
4. Preset Stations: Store favorite stations using preset buttons.
5. CD Operation: Insert CD with label facing up for playback.

CAUTION! Do not operate while driving. Set all controls before driving.

Specifications

• Power Output: 50W x 4 channels maximum
• Frequency Response: 10Hz - 20,000Hz
• Signal-to-Noise Ratio: 95dB
• Bluetooth Version: 3.0 with A2DP profile
• USB Support: USB 2.0, up to 32GB capacity
• Supported Audio Formats: MP3, WMA, AAC
• Display: Multi-color LCD with adjustable dimmer
• Power Requirement: 12V DC, negative ground
• Dimensions: 7" W x 2" H x 6" D

Controls and Settings

Access settings menu by pressing and holding FUNCTION button.

Front Panel: POWER, VOLUME, SOURCE, EJECT, FUNCTION knob.

Remote: POWER, VOLUME, SOURCE, PRESET, MUTE, MENU, navigation buttons.

Audio Settings: Bass (-10 to +10), Treble (-10 to +10), Balance (L9 to R9), Fader (F9 to R9). System Settings: Display dimmer, Beep on/off, Auto-off, Bluetooth pairing. Tuner Settings: Local/DX reception, Preset scan, Auto memory.

Bluetooth Connectivity

Pair mobile devices for wireless audio and hands-free calling.

1. Enable Bluetooth on mobile device.
2. Press and hold BT button until "PAIRING" appears.
3. Select "KDC-X592" from device list on mobile.
4. Enter PIN "0000" if prompted.
5. Confirm pairing on both devices.

Tip: Keep mobile device within 3 feet for optimal Bluetooth performance.

USB and Auxiliary Playback

Supports USB drives and auxiliary input devices.

1. USB: Connect USB device to front panel port.
2. Press SOURCE to select USB mode.
3. Use navigation buttons to browse folders and files.
4. Auxiliary: Connect 3.5mm cable from external device.
5. Select AUX source for playback.

WARNING! Do not remove USB device during playback. Safely eject using STOP function first.

Audio Settings

Advanced audio controls for customized sound experience.

Equalizer Presets: ROCK, POP, JAZZ, CLASSICAL, FLAT. Loudness: On/Off for enhanced bass at low volumes. Subwoofer Control: Level adjustment for external subwoofer. Time Alignment: Adjust audio timing for speaker positions.

Security Features

Detachable faceplate and security code protection.

Security Code: Set 4-digit code in security menu. Faceplate Removal: Press release button and slide faceplate off. Code Entry: If "CODE" appears, enter 4-digit security code.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/security code	Check power and ground connections; enter security code.
No sound	Mute/speaker connections	Check mute setting; verify speaker wiring; adjust volume.
Bluetooth not connecting	Pairing/device compatibility	Delete old pairing; restart both devices; check compatibility.
CD not playing	Disc/dirty lens	Check disc format; clean disc; use lens cleaning CD.
USB not recognized	Format/capacity	Reformat to FAT32; use compatible capacity (max 32GB).

Reset: Disconnect battery for 10 minutes to reset unit.

Service: 1-800-536-9663; www.kenwood.com