Kenwood KDC X701 Manual

The Kenwood KDC X701 is a high-performance car stereo receiver featuring CD playback, USB connectivity, Bluetooth audio streaming, AM/FM tuner with 18 presets, detachable faceplate security, 4-channel amplifier, built-in equalizer with multiple sound modes, auxiliary input, and compatibility with various audio formats. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with detachable faceplate, Remote Control, Wiring harness, Antenna connector, USB port, Auxiliary input, Bluetooth connectivity.

Feature	Description
CD Player	Plays audio CDs and CD-R/RW discs
USB Port	For USB flash drives and iPod connectivity
Bluetooth	Wireless audio streaming and hands-free calling
Auxiliary Input	3.5mm jack for external audio devices
AM/FM Tuner	18 station presets (6 FM, 6 AM, 6 FM2)
Detachable Faceplate	Security feature to prevent theft
4-Channel Amplifier	50W x 4 peak power output
Built-in Equalizer	Multiple sound modes and custom settings
LCD Display	Multi-color illumination with adjustable settings
Remote Control	Full function remote included

Installation

Unpack and inspect contents. Ensure proper wiring connections.

1. Disconnect vehicle battery: Remove negative terminal for safety.
2. Connect wiring harness: Match colors to vehicle wiring (red to ignition, yellow to battery, black to ground).
3. Connect speakers: Follow speaker wire color coding for proper polarity.
4. Mount unit: Secure in DIN slot using mounting sleeve and brackets.
5. Reconnect battery and test functions.

WARNING! Disconnect battery before installation to prevent electrical shorts. Ensure all connections are secure.

First-Time Setup

Power on unit; follow initial configuration steps.

1. Set clock: Press and hold CLOCK button, use tuning knob to set time.
2. Program radio stations: Tune to desired station, press and hold preset button (1-6).
3. Configure audio settings: Use EQ button to select sound mode (ROCK, POP, CLASSIC, etc.).
4. Pair Bluetooth devices: Enter pairing mode, search for "KDC-X701" on your device.
5. Set security code: Program 4-digit code for theft protection.

CAUTION! Always detach faceplate when leaving vehicle unattended.

Specifications

• Power Output: 50W x 4 (Max), 22W x 4 (RMS)
• Tuner Sensitivity: FM 10.3 dBf, AM 25 μV
• Frequency Response: 10Hz - 20kHz
• Signal-to-Noise Ratio: 95 dB (CD)
• Separation: 55 dB
• USB Support: MP3, WMA, AAC files
• Bluetooth Version: 2.1 + EDR
• Display: Multi-color LCD with dimmer control
• Power Requirement: 12V DC, negative ground
• Dimensions: 178mm (W) x 50mm (H) x 153mm (D)

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, BAND button, MENU/ENTER, tuning knob, eject button.

Remote: POWER, VOLUME, SOURCE, BAND, PRESET, MUTE, PLAY/PAUSE, TRACK UP/DOWN.

Audio Settings: BASS, TREBLE, LOUDNESS, FADER, BALANCE, SUBWOOFER control. EQ Modes: USER, ROCK, POP, CLASSIC, JAZZ, FLAT. Display: DIMMER, COLOR settings. System: CLOCK, BEEP, SECURITY CODE.

Connecting Devices

USB: Front panel port for flash drives and iPods. AUX: 3.5mm input for external devices. Bluetooth: Wireless connection for phones and audio players.

1. Turn off unit before connecting devices.
2. USB devices: Insert directly into front port.
3. Auxiliary: Connect 3.5mm cable from device to AUX input.
4. Select source via SOURCE button (TUNER, CD, USB, AUX, BT).

Tip: Format USB drives as FAT32 for best compatibility.

Playing Media

Supports CDs, USB media, Bluetooth audio, and auxiliary input.

1. Insert CD: Press eject button, load disc label-side up.
2. USB playback: Insert USB device, automatically detects and plays music files.
3. Track selection: Use TRACK UP/DOWN buttons or tuning knob.
4. Play modes: REPEAT, RANDOM, SCAN functions available.
5. Fast forward/rewind: Press and hold TRACK buttons during playback.
6. Folder navigation (USB): Use left/right buttons to navigate folders.
7. MP3 ID3 tag display: Shows artist and song title when available.

WARNING! Do not use damaged or improperly burned CDs. Avoid extreme temperatures.

Bluetooth Connectivity

Wireless audio streaming and hands-free calling capabilities.

1. Enter pairing mode: Press SOURCE until BT appears, then press and hold MENU.
2. Search on device: Find "KDC-X701" in Bluetooth settings.
3. Connect: Enter PIN "0000" if prompted.
4. Audio streaming: Play music from connected device.
5. Phone calls: Answer/end calls with remote or unit controls.
6. Phonebook access: Sync contacts for voice dialing.

Note: Keep Bluetooth device within 10 feet for optimal connection.

Care & Maintenance

Clean with soft, dry cloth only. Avoid chemical cleaners.

CAUTION! Do not spray liquids directly on unit. Keep discs and USB ports clean and dry. Store faceplate in protective case when detached.

Regulatory Information

FCC Part 15: Class B digital device compliant. Bluetooth qualified device. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact 1-800-536-9663. This device complies with part 15 of the FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check fuse (10A); verify power and ground connections.
No sound from speakers	Speaker wiring	Check speaker connections; verify speaker impedance (4-8 ohms).
CD won't play	Disc/loading	Ensure disc is clean and not scratched; check format compatibility.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure device is within range; delete old pairing.
USB not recognized	Format/capacity	Reformat as FAT32; try smaller capacity drive; check file formats.
Poor radio reception	Antenna connection	Ensure antenna cable is securely connected; check antenna condition.
Unit locked (CODE)	Security feature	Enter 4-digit security code; contact dealer if code lost.

Reset: Disconnect battery for 1 minute to reset unit.

Service: 1-800-536-9663; www.kenwood.com