Kenwood KDC X889 Manual

The Kenwood KDC X889 is a high-performance car audio receiver featuring CD playback, AM/FM tuner, built-in amplifier, USB connectivity, auxiliary input, Bluetooth compatibility, detachable faceplate security, EQ controls, and advanced audio processing. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Settings 8. Security Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control, Wiring harness, Mounting sleeve, User manual.

Feature	Description
CD playback	Supports CD, CD-R, CD-RW formats
AM/FM tuner	30 station presets (18 FM, 12 AM)
USB connectivity	Front panel USB port for audio playback
Bluetooth	Wireless audio streaming and hands-free calling
Auxiliary input	3.5mm jack for external audio devices
Detachable faceplate	Security feature to prevent theft
EQ controls	Bass, Treble, Balance, Fader adjustments
Power output	50W x 4 channels maximum
Display	Multi-color LCD with adjustable illumination
Remote control	Full function infrared remote included

Installation

Professional installation recommended. Disconnect negative battery terminal before beginning.

Remove existing radio: Use DIN tools to release factory unit.
Connect wiring harness: Match wire colors (red-ignition, yellow-battery, black-ground).
Connect speakers: Front/rear channels with proper polarity.
Install mounting sleeve: Secure in dashboard opening.
Test functions: Reconnect battery, verify all features work.

WARNING! Ensure proper fuse rating. Incorrect installation may damage unit or vehicle electrical system.

Basic Operation

Power on unit; detach faceplate when parking in unsafe areas.

Source selection: Press SOURCE to cycle through CD, Tuner, USB, AUX, Bluetooth.
Volume control: Turn knob or use remote VOL+/- buttons.
CD operation: Insert disc label side up; use SKIP for track selection.
Tuner operation: Press BAND for AM/FM; SCAN for station search.
Bluetooth pairing: Enable BT on phone, select KDC-X889 from available devices.

CAUTION! Do not operate while driving if it distracts from road safety.

Specifications

Power Output: 50W x 4 (max), 22W x 4 (RMS)
Frequency Response: 10Hz - 20kHz
Signal-to-Noise Ratio: 105dB (CD)
Preset Stations: 30 total (18 FM, 12 AM)
Supported Media: CD, CD-R, CD-RW, MP3/WMA CDs
USB Support: MP3, WMA, AAC files
Bluetooth Version: 2.1 + EDR
Power Requirement: 12V DC, negative ground
Dimensions: DIN size (178mm x 50mm)

Controls and Settings

Front panel: POWER/VOLUME knob, SOURCE, EJECT, FUNCTION, AUDIO CONT.

Remote: POWER, Numeric buttons, SOURCE, VOLUME, MUTE, BAND, SCAN, PLAY/PAUSE.

Audio: BASS, TREBLE, BALANCE, FADER, LOUDNESS, SUBWOOFER control. Display: DIMMER, COLOR settings. Tuner: LOCAL/DX, ASM (Auto Store Memory). System: BEEP ON/OFF, CLOCK setting, BT PIN code (default 0000).

Connecting Devices

USB: Front panel port for flash drives. AUX: 3.5mm input for portable players. Bluetooth: Wireless audio and phone connectivity.

USB devices: Format as FAT32; maximum capacity 32GB.
Auxiliary input: Use quality cable to minimize noise.
Bluetooth: Pair once; automatic reconnection thereafter.
Amplifier: Use RCA pre-outs for external amplification.

Tip: For best Bluetooth performance, keep phone within 3 feet of unit.

Audio Settings

Access audio menu via AUDIO CONT button.

EQ Presets: FLAT, POP, ROCK, JAZZ, CLASSICAL, USER.
Bass/Treble: -6 to +6 dB adjustment.
Balance/Fader: Adjust speaker output distribution.
Loudness: Enhances low/high frequencies at low volumes.
Subwoofer: Level control for external subwoofer.
TA (Time Alignment): Adjusts audio timing for seating position.

Note: USER EQ allows custom 5-band equalizer settings.

Security Features

Detachable Faceplate: Remove when parking to deter theft. Security Code: 4-digit code required if power disconnected (default 0000).

Care & Maintenance

Use soft cloth for cleaning; avoid chemicals. Keep discs clean and free of scratches. Store faceplate in protective case.

CAUTION! Do not expose to extreme temperatures or moisture. Never insert damaged CDs.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of FCC Rules. Bluetooth® is a registered trademark of Bluetooth SIG, Inc. For support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery and ignition connections; verify fuse rating.
No sound	Speaker wiring	Verify speaker connections; check balance/fader settings.
CD won't play	Disc/format	Ensure compatible disc format; clean disc surface.
Bluetooth not connecting	Pairing	Delete old pairing; restart both devices; enter PIN 0000.
USB not recognized	Format/capacity	Reformat as FAT32; ensure capacity under 32GB.
Security code required	Power loss	Enter default code 0000 or your custom code.

Reset: Disconnect battery for 30 seconds to reset unit.

Service: 1-800-536-9663; www.kenwood.com