Kenwood KDC X890 Manual

The Kenwood KDC X890 is a high-performance car stereo receiver featuring CD playback, USB connectivity, Bluetooth audio streaming, AM/FM tuner with 18 presets, detachable faceplate security, 4-channel amplifier (22W x 4), EQ settings, customizable display colors, and auxiliary input. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Audio Source Connections 7. Bluetooth Connectivity 8. Security Features 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, Remote Control, Wiring harness, USB port, Auxiliary input, Bluetooth antenna.

Feature	Description
CD playback	Plays audio CDs and CD-R/RW
USB connectivity	For USB flash drives and iPod connectivity
Bluetooth audio	Wireless audio streaming from compatible devices
AM/FM tuner	18 station presets (6 FM, 6 AM, 6 FM2)
Detachable faceplate	Security feature to prevent theft
4-channel amplifier	22W x 4 RMS power output
EQ settings	Bass, Treble, Loudness, and 3-band parametric EQ
Display customization	Multiple color options for display illumination
Auxiliary input	3.5mm jack for external audio devices
Remote control	Full function remote included

Installation

Unpack and inspect contents. Ensure proper wiring connections.

Disconnect vehicle battery: Remove negative terminal for safety.
Connect wiring harness: Match colors to vehicle wiring (red to ignition, yellow to battery, black to ground).
Mount unit: Slide into DIN slot and secure with mounting sleeve.
Connect antennas: Attach FM/AM antenna and Bluetooth antenna.
Reconnect battery and test unit.

WARNING! Always disconnect battery before installation to prevent electrical shorts.

Basic Operation

Power on unit; follow source selection and playback controls.

Power on/off: Press SRC/OFF button.
Source selection: Press SRC to cycle through CD, USB, BT, AUX, TUNER.
Volume control: Turn VOL knob or use remote volume buttons.
Playback controls: Use PLAY, PAUSE, SKIP buttons for media playback.
Preset stations: Store and recall favorite radio stations.

CAUTION! Do not operate while driving; set controls before driving.

Specifications

Power Output: 22W x 4 RMS (50W x 4 max)
Tuner Sensitivity: FM 10.8 dBf, AM 18 dBμ
Frequency Response: 10Hz - 20kHz
Signal-to-Noise Ratio: 95 dB (CD)
USB Support: USB 2.0, up to 32GB
Bluetooth Version: 2.1 + EDR
Display: Dot matrix LCD with customizable colors
Power Requirement: 12V DC negative ground
Dimensions: DIN size (178mm x 50mm)

Controls and Settings

Access settings via FUNCTION button and rotary encoder.

Front Panel: SRC/OFF, VOL knob, EJECT, FUNCTION, numeric buttons.

Remote: POWER, Numeric buttons, SRC, VOLUME, MUTE, BAND, PRESET.

Audio Settings: BASS, TREBLE, LOUDNESS, 3-band EQ (80Hz, 1kHz, 12.5kHz). Display: 7-color illumination, dimmer control. System: Clock setting, Beep on/off, Bluetooth pairing. Source: CD repeat/shuffle, USB folder play, Tuner seek/scan.

Audio Source Connections

USB: Front/rear port for flash drives. AUX: 3.5mm input for external devices.

USB connection: Insert USB device into port; unit automatically detects.
AUX input: Connect 3.5mm cable from external device to AUX port.
iPod connection: Use compatible USB cable for iPod control.
Select source: Press SRC until desired source is displayed.

Tip: Format USB drives as FAT32 for best compatibility.

Bluetooth Connectivity

Supports audio streaming and hands-free calling.

Enable pairing: Press BT button or select BT in source menu.
Search devices: On mobile device, search for "KDC-X890".
Pair devices: Enter PIN "0000" if required.
Audio streaming: Play audio from paired device automatically.
Phone calls: Answer/end calls with phone button on remote.

WARNING! Keep attention on driving; use voice commands when possible.

Security Features

Detachable Faceplate: Remove when parked to deter theft. Security Code: 4-digit code prevents unauthorized use.

Maintenance

Use soft dry cloth for cleaning. Store faceplate in protective case.

CAUTION! Do not use chemicals or abrasive cleaners on display.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't power on	Wiring/power	Check fuse; verify power and ground connections.
No sound	Settings/speakers	Check volume; verify speaker connections; check mute.
Bluetooth not connecting	Pairing/distance	Reset pairing; ensure device within range; restart both devices.
USB not recognized	Format/cable	Reformat USB as FAT32; try different USB device.
CD won't play	Disc/damage	Clean disc; check for scratches; ensure proper insertion.

Reset: Disconnect battery for 1 minute to reset unit.

Service: 1-800-536-9663; www.kenwood.com