Kenwood KDC X895 Manual

The Kenwood KDC X895 is a high-performance car audio receiver featuring CD/MP3/WMA playback, USB connectivity, Bluetooth for hands-free calling and audio streaming, advanced audio controls, SiriusXM Satellite Radio ready, HD Radio compatible, 4-channel preamp outputs, detachable faceplate security, and customizable illumination. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Bluetooth Connectivity 7. USB and Audio Playback 8. Audio Settings 9. Security Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, Remote Control, Wiring harness, USB cable, Bluetooth microphone, Installation accessories.

Feature	Description
CD/MP3/WMA Playback	Plays CDs, MP3, and WMA audio files
Bluetooth Connectivity	Hands-free calling and audio streaming
USB Port	For USB devices and smartphone connectivity
HD Radio Compatible	Enhanced digital radio reception
SiriusXM Ready	Satellite radio compatibility
4V Preamp Outputs	Front, rear, and subwoofer outputs
13-Band EQ	Advanced equalizer controls
Detachable Faceplate	Security feature to prevent theft
Customizable Illumination	Adjustable display colors
Remote Control	Full function remote included

Installation

Proper installation ensures optimal performance and safety.

Disconnect vehicle battery: Remove negative terminal before installation.
Mount unit: Use DIN sleeve and mounting kit for secure fit.
Connect wiring: Match wire colors (red-ignition, yellow-battery, black-ground).
Connect speakers: Use appropriate gauge speaker wire.
Connect antennas: AM/FM and satellite radio antennas.
Test functions: Reconnect battery and test all features.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts.

Basic Operation

Power on unit and familiarize with basic controls.

Power: Press SRC/OFF to turn on/off.
Source selection: Press SRC to cycle through sources (Radio, CD, USB, BT).
Volume control: Use VOL knob or remote control.
Playback controls: Use transport buttons for play, pause, skip.
Mode selection: Access different audio modes via FUNCTION button.

CAUTION! Do not operate while driving; set controls before driving.

Specifications

Power Output: 50W x 4 channels (max)
Preamp Outputs: 4V front, rear, subwoofer
Frequency Response: 10Hz - 20kHz
Signal-to-Noise: 105dB
Supported Formats: CD-DA, MP3, WMA, AAC
Bluetooth Version: 3.0 + EDR
USB Support: USB 2.0, up to 32GB
Illumination: 3-color customizable
Security: Detachable faceplate

Controls and Settings

Front Panel: SRC/OFF, VOL knob, EJECT, FUNCTION, Audio controls.

Remote: Power, Volume, Transport controls, Mode selection, Numeric buttons.

Audio Settings: 13-band equalizer, Bass/Mid/Treble, Loudness, Subwoofer level, Fader/Balance. Source Settings: Radio presets, CD repeat/shuffle, USB folder play, Bluetooth pairing. System Settings: Display settings, Clock, Beep tones, Illumination color.

Bluetooth Connectivity

Pair mobile devices for hands-free calling and audio streaming.

Enable pairing mode: Hold BT button until display shows "PAIRING"
Search on device: Find "KDC-X895" in Bluetooth settings
Enter PIN: Use "0000" if prompted
Confirm connection: Unit will display "CONNECTED"
Make calls: Use phonebook access or dial manually
Stream audio: Select BT Audio as source

Tip: Up to 5 devices can be paired; only one can be connected at a time.

USB and Audio Playback

Supports USB devices and various audio formats.

Connect USB: Use front or rear USB port
Select source: Press SRC until USB is selected
Navigate files: Use folder up/down buttons
Play modes: Repeat, shuffle, scan
ID3 tag display: Shows artist and song title
Fast forward/rewind: Hold >> or << buttons

WARNING! Do not remove USB device during playback to prevent data corruption.

Audio Settings

Advanced audio controls for optimal sound quality.

Equalizer: 13-band graphic EQ with preset curves (Pop, Rock, Jazz, etc.). Crossover: High-pass and low-pass filters. Time Alignment: Adjust speaker delay for optimal staging. Loudness: Bass enhancement at low volumes. Subwoofer Control: Level, phase, and low-pass filter.

Security Features

Detachable faceplate and security code protection.

Faceplate Removal: Press release button and slide faceplate off. Security Code: Set 4-digit code in system settings. Anti-theft LED: Deterrent indicator when faceplate removed.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/security code	Check battery and ignition connections; enter security code if prompted.
No sound	Speaker wiring/mute	Verify speaker connections; check mute function; adjust volume.
Bluetooth not connecting	Pairing mode/device	Enter pairing mode; delete old pairing from device; restart both devices.
USB not recognized	Format/compatibility	Use FAT32 format; ensure device under 32GB; try different USB cable.
CD not playing	Disc/unit	Clean disc; check for scratches; ensure proper format (CD-DA, MP3).

Reset: Hold SRC and EJECT for 5 seconds to factory reset.

Service: 1-800-536-9663; www.kenwood.com