Kenwood KFC60SS15 Manual

The Kenwood KFC60SS15 is a 6.5-inch car audio coaxial speaker system featuring a polypropylene cone with elastomer surround, 1-inch balanced dome tweeter, 4-ohm impedance, 60W RMS power handling (180W peak), frequency response of 35Hz-22kHz, sensitivity of 90dB, and top-mount depth of 2-1/16 inches. Designed for versatile vehicle installation with universal fitment. Below are key sections for specifications, installation, wiring, operation, and troubleshooting.

1. Features at a Glance 2. Installation Guidelines 3. Wiring Connections 4. Specifications 5. Controls and Settings 6. Mounting Options 7. Sound Adjustment 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 6.5-inch polypropylene woofer, 1-inch PEI balanced dome tweeter, universal mounting system, integrated crossover network.

Feature	Description
Woofer Size	6.5-inch polypropylene cone
Tweeter	1-inch PEI balanced dome
Power Handling	60W RMS / 180W peak
Impedance	4 ohms
Sensitivity	90dB (1W/1m)
Frequency Response	35Hz - 22kHz
Mounting Depth	2-1/16 inches
Crossover	Integrated passive crossover
Surround Material	Elastomer
Magnet Type	Ferrite

Installation Guidelines

Prepare vehicle and gather necessary tools before installation.

Remove existing speakers: Carefully detach door panels or existing speaker mounts.
Check mounting depth: Ensure 2-1/16 inches clearance is available.
Test fit speaker: Verify proper alignment with mounting holes.
Secure speaker: Use provided hardware to firmly attach speaker.
Connect wiring: Follow polarity markings for proper connection.

WARNING! Disconnect vehicle battery before installation to prevent electrical shorts. Wear safety glasses when working with tools.

Wiring Connections

Proper wiring ensures optimal performance and prevents damage.

Identify polarity: Positive (+) and negative (-) terminals are clearly marked.
Connect to amplifier: Match positive to positive, negative to negative.
Use proper gauge: 16-18 AWG speaker wire recommended.
Secure connections: Ensure wires are firmly attached and insulated.
Test operation: Reconnect battery and test speaker function.

CAUTION! Do not exceed 60W RMS power to prevent speaker damage. Ensure all connections are secure and insulated.

Specifications

Speaker Size: 6.5 inches coaxial
Woofer: Polypropylene cone with elastomer surround
Tweeter: 1-inch PEI balanced dome
Power Handling: 60W RMS / 180W peak
Impedance: 4 ohms
Frequency Response: 35Hz - 22kHz
Sensitivity: 90dB (1W/1m)
Mounting Depth: 2-1/16 inches
Crossover: Integrated passive network
Magnet Weight: 10 oz ferrite

Controls and Settings

Speaker performance can be adjusted through external amplifier settings.

Amplifier Controls: Gain, crossover frequency, bass boost, equalization.

Gain: Set to match head unit output voltage. Crossover: Use high-pass filter for protection. Bass: Avoid excessive bass boost to prevent distortion. Equalization: Adjust to match vehicle acoustics and personal preference.

Mounting Options

Universal fitment for most vehicle applications.

Door mounting: Most common installation location.
Rear deck: Suitable for sedan applications.
Custom enclosures: For specialized applications.
Adapter rings: May be required for some vehicle models.

Tip: Use appropriate mounting hardware and ensure secure fitment to prevent vibration.

Sound Adjustment

Optimize speaker performance through proper system tuning.

Set amplifier gain: Match input sensitivity to head unit output.
Adjust crossover: Use high-pass filter to protect speakers.
Balance and fade: Set for optimal sound staging.
Equalization: Fine-tune frequency response for vehicle acoustics.
Break-in period: Allow 10-15 hours of moderate use for optimal performance.

WARNING! Avoid clipping and distortion by not exceeding recommended power levels. Gradual break-in improves long-term performance.

Care & Maintenance

Regular maintenance ensures long-term performance and reliability.

Cleaning: Use soft, dry cloth only. Avoid liquids and chemical cleaners. Inspection: Periodically check connections and mounting hardware. Protection: Avoid exposure to moisture and extreme temperatures.

CAUTION! Do not use abrasive cleaners or solvents. Keep magnets away from electronic devices and credit cards.

Regulatory Information

FCC Part 15: Class B digital device compliance. CE marked for European conformity. RoHS compliant for hazardous substance restrictions. Copyright © Kenwood Corporation. For technical support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Wiring/amplifier	Check connections; verify amplifier power; test with known good source.
Distorted sound	Overpowering/clipping	Reduce amplifier gain; check for clipping; verify power levels.
Rattling noise	Loose mounting	Tighten mounting hardware; check for obstructions.
Intermittent sound	Loose connections	Inspect and secure all wiring connections.
Uneven frequency response	Crossover settings	Adjust amplifier crossover and equalization settings.

Service: Contact authorized Kenwood service centers for warranty claims and technical support.