kenwood kmm 100u manual

The Kenwood KMM-100U is a single-DIN digital media receiver with Bluetooth connectivity, USB input, auxiliary input, AM/FM tuner, and support for various audio formats. Features include hands-free calling, audio streaming, customizable illumination, and intuitive controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Bluetooth Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital media receiver, Remote Control, USB port, AUX input, Bluetooth antenna, Wiring harness.

Feature	Description
Bluetooth connectivity	For hands-free calling and audio streaming
USB input	For USB devices and charging
AUX input	For external audio sources
AM/FM tuner	For radio reception with preset stations
Illumination control	Adjustable button and display colors
Power output	50W x 4 channels maximum
Source button	Cycles through input sources
Volume control	Adjusts audio level
MUTE	Mutes audio output
POWER	Turns unit on/off

Installation

Unpack and inspect contents. Ensure proper vehicle compatibility.

Disconnect vehicle battery: Remove negative terminal for safety.
Connect wiring harness: Match colors to vehicle wiring (red to ignition, yellow to battery, black to ground).
Mount unit: Insert into DIN slot and secure with mounting sleeve.
Connect antennas: Attach Bluetooth and AM/FM antennas.
Reconnect battery and test unit.

WARNING! Disconnect battery before installation to prevent electrical shorts. Ensure all connections are secure.

First-Time Setup

Power on unit; follow initial configuration.

Set clock: Press and hold SETUP, adjust time using navigation buttons.
Pair Bluetooth: Enter pairing mode, search for "KMM-100U" on mobile device.
Set radio presets: Tune to desired stations, press and hold preset buttons.
Adjust illumination: Customize button and display colors in settings.
Set audio preferences: Configure bass, treble, and balance settings.

CAUTION! Do not operate while driving. Park vehicle safely during setup.

Specifications

Power Output: 50W x 4 channels (max)
Bluetooth Version: 4.1 with A2DP
Supported Formats: MP3, WMA, AAC, WAV
Inputs: USB, AUX, Bluetooth
Tuner: AM/FM with 18 FM/6 AM presets
Illumination: RGB customizable colors
Display: Monochrome LCD
Power Supply: 12V DC, negative ground
Dimensions: Single DIN (178mm x 50mm)

Controls and Settings

Access settings via SETUP button. Front Panel: POWER, SOURCE, VOLUME, MUTE, USB port, AUX input.

Remote: POWER, SOURCE, VOLUME, MUTE, PRESET, PLAY/PAUSE, TRACK navigation.

Audio: Bass, treble, balance, fader, loudness. Display: Dimmer, illumination color. Bluetooth: Pairing, phonebook access, call history. System: Clock, reset, beep tone.

Connecting Devices

USB: Connect flash drives or charging cables. AUX: 3.5mm audio cable. Bluetooth: Wireless pairing.

Turn off unit before connecting wired devices.
Insert USB device directly into front port.
Connect AUX cable to front input.
For Bluetooth, ensure device is in pairing mode.
Select source via SOURCE button (USB, BT, AUX, RADIO).

Tip: Format USB devices to FAT32 for best compatibility.

Playing Media

Supports USB playback, Bluetooth streaming, AUX input, and radio.

USB playback: Insert device, select USB source, navigate folders with navigation buttons.
Bluetooth audio: Pair device, select BT source, control playback from unit or device.
AUX input: Connect audio device, select AUX source, control volume on both devices.
Radio: Select RADIO source, tune stations, save presets.
Playback controls: PLAY/PAUSE, PREV/NEXT track, fast forward/rewind.
Repeat/shuffle: Access through function menu during playback.

WARNING! Do not remove USB device during playback. Eject properly through menu.

Bluetooth Features

Hands-free calling: Answer/end calls with unit controls. Audio streaming: Wireless music playback. Phonebook access: Sync contacts for voice dialing.

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid liquids and abrasive cleaners. Keep vents clear of obstruction.

CAUTION! Do not use chemical cleaners on display. Disconnect power before cleaning.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ fuse	Check battery and ignition connections; replace fuse if blown.
Bluetooth not connecting	Pairing mode/distance	Ensure unit in pairing mode; move device closer; delete old pairing.
USB not recognized	Format/capacity	Reformat to FAT32; use device under 32GB; check file compatibility.
Poor radio reception	Antenna connection	Ensure antenna connected properly; check antenna condition.
No sound from speakers	Wiring/settings	Check speaker connections; verify audio settings not muted.

Reset: Press RESET button with small tool or disconnect power for 30 seconds.

Service: Contact authorized Kenwood service center; www.kenwood.com