Kenwood KMR D368BT Manual

The Kenwood KMR D368BT is a digital media receiver with Bluetooth connectivity, USB input, auxiliary input, and AM/FM tuner. Features include hands-free calling, audio streaming, smartphone compatibility, and customizable audio settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Bluetooth Operation 8. Audio Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital media receiver, Bluetooth module, USB port, AUX input, AM/FM tuner, Remote Control, Wiring harness.

Feature	Description
Bluetooth connectivity	For hands-free calling and audio streaming
USB input	For connecting USB devices and charging
AUX input	For external audio devices
AM/FM tuner	For radio reception with preset stations
Power output	4 x 50W maximum power
Display	LCD with customizable illumination
Source button	Cycles through available audio sources
Volume control	Adjusts audio output level
Mode button	Accesses different operation modes
Power button	Turns unit on/off

Installation

Unpack and inspect contents. Ensure proper vehicle compatibility.

Disconnect vehicle battery: Remove negative terminal for safety.
Remove existing stereo: Use appropriate removal tools for your vehicle.
Connect wiring harness: Match color-coded wires to vehicle harness.
Mount receiver: Secure in dashboard using supplied mounting sleeve.
Reconnect battery and test functions.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts.

First-Time Setup

Power on unit; follow initial setup procedure.

Language selection: Choose preferred language in settings menu.
Bluetooth pairing: Enter pairing mode and connect smartphone.
Radio presets: Scan and save favorite AM/FM stations.
Audio settings: Adjust bass, treble, balance, and fader.
Display settings: Set illumination color and brightness.

CAUTION! Do not operate while driving. Park vehicle for initial setup.

Specifications

Power Output: 4 x 50W Max (4 x 22W RMS)
Bluetooth Version: 4.1 with A2DP/AVRCP/HFP
USB Support: MP3/WMA/AAC playback, charging capability
Tuner: AM/FM with 18 FM/6 AM presets
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: >80dB
Display: Monochrome LCD with adjustable dimmer
Power Requirement: 12V DC negative ground
Dimensions: DIN size (178mm x 50mm)

Controls and Settings

Access settings via function button and rotary knob. Front Panel: Power, Volume, Source, Mode, USB/AUX ports.

Remote: Power, Volume, Source selection, Track skip, Preset buttons, Mode, Mute.

Audio Settings: Bass, Treble, Balance, Fader, Loudness, EQ presets. Bluetooth: Pairing, Phonebook access, Call history. System: Display settings, Beep tone, Reset function. Radio: Auto store, Manual tuning, Seek function.

Connecting Devices

USB: Connect flash drives or charging cables. AUX: 3.5mm audio cable. Bluetooth: Wireless pairing.

Turn off unit before connecting wired devices.
Insert USB device fully into port.
Connect AUX cable to external audio source.
For Bluetooth, ensure device is in pairing mode.
Select appropriate source button.

Tip: Use high-quality cables for best audio performance.

Bluetooth Operation

Supports hands-free calling and audio streaming.

Pairing: Hold BT button until display shows "PAIRING".
Search: On smartphone, search for "KMR-D368BT" in Bluetooth settings.
Connect: Enter PIN "0000" if prompted.
Calls: Answer/end calls with phone button; reject with long press.
Audio: Stream music from compatible apps.
Phonebook: Sync contacts for voice dialing.
Disconnect: Turn off Bluetooth or select "Forget Device".

WARNING! Maintain attention on driving while using hands-free features.

Audio Settings

Customize sound with equalizer and tone controls. EQ Presets: Flat, Powerful, Natural, Vocal. Tone Controls: Bass (-7 to +7), Treble (-7 to +7). Balance/Fader: Adjust speaker output. Loudness: Boost low frequencies at low volumes.

Care & Maintenance

Use soft, dry cloth for cleaning. Avoid chemical cleaners. Keep vents clear of obstruction.

CAUTION! Do not use abrasive materials; avoid liquid contact with controls.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ignition	Check fuse; verify proper connections; test ignition wire.
Bluetooth not connecting	Pairing mode/distance	Ensure unit in pairing mode; check device compatibility; reduce distance.
No sound from speakers	Settings/wiring	Check volume; verify speaker connections; test fader balance.
USB not recognized	Format/compatibility	Use FAT32 format; check file compatibility; try different device.
Poor radio reception	Antenna/connection	Ensure antenna connected properly; check antenna amplifier.

Reset: Hold reset button or disconnect power for 30 seconds.

Service: 1-800-536-9663; www.kenwood.com