Kenwood KNA DV4100 Installation Manual

The Kenwood KNA DV4100 is a high-performance DVD navigation system designed for in-vehicle use, featuring GPS navigation, DVD playback, and multimedia capabilities. This system includes a 6.1-inch wide TFT LCD display, built-in GPS antenna, DVD drive, touch panel controls, and multiple audio/video inputs. Below are key sections for installation, features, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.1-inch TFT LCD display, GPS navigation system, DVD player, touch panel controls, multiple AV inputs, and built-in amplifier.

Installation Requirements

Before installation, ensure you have all necessary components and tools.

1. Required Tools: Phillips screwdriver, wire cutters/strippers, crimp connectors, multimeter
2. Required Components: Wiring harness, mounting kit, GPS antenna, all necessary cables
3. Vehicle Preparation: Disconnect negative battery terminal before beginning installation
4. Space Requirements: Verify adequate space behind dashboard for unit depth

WARNING! Always disconnect vehicle battery before beginning installation to prevent electrical shorts or damage.

Installation Procedure

Follow these steps for proper installation of your Kenwood KNA DV4100 navigation system.

1. Remove factory radio: Use appropriate tools to carefully remove existing head unit
2. Connect wiring harness: Match wire colors and functions (red-ignition, yellow-battery, black-ground)
3. Install GPS antenna: Place on dashboard or roof with clear view of sky
4. Mount unit: Secure using provided mounting kit and brackets
5. Connect all cables: Ensure all audio, video, and power connections are secure
6. Test system: Reconnect battery and verify all functions work properly
7. Final assembly: Secure unit in dashboard and replace all trim pieces

CAUTION! Route all cables away from moving parts and heat sources. Secure loose wiring to prevent rattles.

Specifications

• Display: 6.1-inch wide TFT LCD, 1440 x 234 pixels
• Navigation: Built-in GPS with 3D map display
• DVD Compatibility: DVD-Video, DVD-R/RW, CD-DA, MP3, WMA
• Audio Output: 22W x 4 channels (max power)
• Video Inputs: 2 rear camera inputs (RCA), 1 auxiliary input
• Audio Inputs: iPod direct control, USB, Bluetooth audio
• Power Supply: 12V DC negative ground
• Operating Temperature: -20°C to 60°C (-4°F to 140°F)
• Dimensions: 178mm (W) x 100mm (H) x 160mm (D)

Controls and Connections

Front Panel: POWER, EJECT, SOURCE, VOLUME knob, touch screen display.

Rear Connections: Power connector, speaker outputs, GPS antenna, AV inputs, camera inputs, USB port, iPod connection, steering wheel control input.

Display Settings: Brightness, contrast, color temperature, screen angle adjustment. Audio Settings: Bass, treble, balance, fader, loudness, EQ presets. Navigation Settings: Map display options, route preferences, voice guidance settings.

System Setup

Initial setup and configuration after installation.

1. Language Selection: Choose preferred language for menus and voice guidance
2. Time/Date Settings: Set current time, date, and time zone
3. Navigation Setup: Calibrate GPS, set home location, configure route options
4. Audio Settings: Adjust equalizer, balance, fader to personal preference
5. Vehicle Settings: Configure for your specific vehicle type and dimensions
6. Bluetooth Pairing: Connect mobile phone for hands-free operation

Tip: Complete all setup procedures before final dashboard assembly for easy access.

Navigation Operation

Using the GPS navigation system for route guidance.

1. Destination Entry: Use touch screen to enter address, POI, or coordinates
2. Route Calculation: System calculates fastest or shortest route based on preference
3. Voice Guidance: Follow spoken instructions during navigation
4. Map Display: View 2D or 3D map with turn-by-turn directions
5. Route Options: Avoid toll roads, highways, or specific areas
6. Detour Function: Automatically recalculate route if you deviate from planned path
7. Points of Interest: Search for nearby gas stations, restaurants, hotels
8. Traffic Information: Display real-time traffic conditions (if equipped)

WARNING! Do not operate navigation system while driving. Pull over safely to enter destinations.

DVD Playback

Playing DVD media and other compatible formats.

1. Insert disc: Press EJECT button, load DVD or CD
2. Playback: System automatically begins playback; use touch screen for controls
3. Menu Navigation: Access DVD menus using on-screen buttons
4. Chapter Selection: Skip forward/backward through chapters
5. Audio Tracks: Switch between available audio languages
6. Subtitles: Enable/disable subtitles as needed
7. Screen Modes: Adjust aspect ratio (16:9, 4:3, zoom)
8. MP3 Playback: Navigate folders and select tracks from CD or USB

CAUTION! Only use the system for DVD playback when vehicle is parked. Driving while watching video is dangerous and illegal in many areas.

Safety Precautions

Important safety information for installation and operation.

• Always park vehicle in safe location before operating navigation functions
• Keep volume at reasonable level to maintain awareness of surroundings
• Do not attempt installation while driving or in moving vehicle
• Ensure all wiring is properly insulated and secured
• Do not block air vents or place objects on top of unit
• Keep original packaging for transportation or service

WARNING! Installation should be performed by qualified technician. Incorrect installation may damage vehicle electrical system.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC rules. Operation subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. Copyright © Kenwood Corporation. All rights reserved. Map data copyright © navigation software provider. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Reset: Press reset button with pointed object if system becomes unresponsive.

Service: 1-800-536-9663; www.kenwood.com