Kenwood KR V6020 Manual

The Kenwood KR V6020 is a high-performance stereo receiver featuring 60 watts per channel, digital tuning with 30 presets, multiple audio inputs, phono input for turntables, tone controls, loudness compensation, and remote control operation. Below are key sections for features, installation, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Settings 8. Remote Control Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stereo receiver with digital tuning, remote control, multiple audio inputs, phono stage, and tone controls.

Feature	Description
Power Output	60 watts per channel (8 ohms)
Tuner Section	FM/AM with 30 station presets
Audio Inputs	CD, Tape, Phono, Aux
Phono Input	MM cartridge compatible
Tone Controls	Bass, Treble, Loudness
Headphone Jack	Standard 6.3mm stereo jack
Remote Control	Full function remote included
Power Consumption	180W maximum
Dimensions	440 x 150 x 380 mm (WxHxD)
Weight	8.5 kg

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect speakers: Use speaker wire to connect left and right speakers to appropriate terminals.
Connect audio sources: Use RCA cables for CD player, tape deck, turntable, or auxiliary devices.
Connect antenna: Attach FM and AM antennas for radio reception.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use correct speaker impedance.

First-Time Setup

Power on receiver; initialize system settings.

Set clock: Press CLOCK button and set current time.
Program radio stations: Use auto-scan or manual tuning to store favorite stations.
Configure audio settings: Adjust bass, treble, and balance to preference.
Test all inputs: Verify each audio source is working properly.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 60W + 60W (8 ohms, 20Hz-20kHz)
Total Harmonic Distortion: 0.08%
Frequency Response: 10Hz-50kHz
Input Sensitivity: Phono: 2.5mV, CD/Aux: 150mV
Signal-to-Noise Ratio: Phono: 76dB, CD/Aux: 90dB
Tuner Section: FM/AM with 30 presets
Power Requirements: AC 120V, 60Hz
Dimensions: 440 x 150 x 380 mm (WxHxD)
Weight: 8.5 kg

Controls and Settings

Front panel controls: POWER, VOLUME, SOURCE SELECT, BASS, TREBLE, BALANCE, TUNING, PRESET buttons.

Remote Control: POWER, VOLUME, MUTE, SOURCE SELECT, TUNING, PRESET, TONE, SLEEP.

Audio Controls: Bass (±10dB), Treble (±10dB), Balance (L/R), Loudness compensation. Tuner: Manual/Auto tuning, Preset memory, Stereo/Mono selection. System: Clock setting, Sleep timer, Display dimmer.

Connecting Devices

Audio Inputs: PHONO, CD, TAPE, AUX. Speaker Outputs: A/B speaker terminals.

Turn off receiver before connecting devices.
Match RCA cables to correct input jacks (red/white).
Connect turntable to PHONO input only.
Select source via SOURCE button (PHONO, CD, TAPE, AUX, TUNER).

Tip: Use high-quality cables for best audio performance.

Audio Settings

Optimize sound quality with tone controls and special features.

Bass Control: Adjust low frequency response (±10dB at 100Hz)
Treble Control: Adjust high frequency response (±10dB at 10kHz)
Loudness: Engage for enhanced bass at low volume levels
Balance: Adjust left/right speaker balance
Source Direct: Bypass tone controls for pure signal path

Note: Use Loudness feature when listening at low volume levels.

Remote Control Operation

Full function remote controls all receiver operations.

Button	Function
POWER	Turns receiver on/off
VOLUME +/-	Adjusts volume level
MUTE	Temporarily mutes audio
SOURCE	Selects input source
TUNING	Manual tuning up/down
PRESET	Selects stored stations
TONE	Accesses tone controls
SLEEP	Sets sleep timer

Battery: Use two AAA batteries; replace when range decreases.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners or aerosols. Avoid blocking ventilation openings.

Regulatory Information

FCC Part 15: Class B digital device compliant. Manufactured to meet international safety standards. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power cord connection; verify outlet function.
No sound	Speaker connections/volume	Check speaker wires; ensure volume not muted or too low.
Poor radio reception	Antenna placement	Reposition FM antenna; extend AM loop antenna fully.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to IR sensor.
Distorted sound	Input level/speakers	Reduce source volume; check speaker impedance compatibility.
Phono input noisy	Grounding/turntable	Ensure turntable ground wire connected; check cartridge.

Reset: Disconnect power for 30 seconds to reset microprocessor.

Service: Contact authorized Kenwood service center for repairs.