Kenwood KR V6030 Manual

The Kenwood KR V6030 is a high-performance stereo receiver featuring 60 watts per channel, Dolby Pro Logic surround sound, AM/FM tuner with 30 presets, multiple audio inputs, remote control, tone controls, and speaker selector. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stereo receiver unit, Remote Control, AM/FM antenna terminals, multiple audio inputs, speaker terminals, headphone jack.

Feature	Description
Power Output	60 watts per channel (8 ohms)
Tuner	AM/FM with 30 station presets
Audio Inputs	CD, Tape, Phono, Video/Aux
Speaker Terminals	A/B speaker selector
Headphone Jack	For private listening
AC Power Cord	For power connection
Remote Control	Full function remote included
Dolby Pro Logic	Surround sound processing
Tone Controls	Bass and treble adjustment
Loudness	Audio compensation feature

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect speakers: Use speaker wire to connect to A/B terminals, observing polarity.
Connect antenna: Attach FM wire antenna and AM loop antenna to respective terminals.
Connect audio sources: Use appropriate cables for CD player, tape deck, turntable, etc.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow initial setup procedure.

Set speaker configuration: Select A, B, or A+B speakers using front panel button.
Tune radio stations: Use auto-scan or manual tuning to set FM/AM presets.
Adjust tone controls: Set bass and treble to personal preference.
Configure surround sound: Set up Dolby Pro Logic if using surround speakers.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 60W + 60W (8 ohms, 20Hz-20kHz)
Total Harmonic Distortion: 0.08%
Frequency Response: 10Hz-50kHz
Signal-to-Noise Ratio: 80dB (Phono)
Tuner Section: FM/AM with 30 presets
Input Sensitivity: Phono: 2.5mV, CD: 150mV
Speaker Impedance: 8-16 ohms
Power Requirements: 120V AC, 60Hz
Dimensions: 17-1/8" W x 5-1/4" H x 13-3/8" D

Controls and Settings

Front Panel: POWER, VOLUME, INPUT SELECTOR, TUNER BAND, SPEAKER SELECTOR, TONE CONTROLS.

Remote: POWER, VOLUME, MUTE, INPUT SELECTION, TUNER PRESETS, TONE CONTROLS.

Audio Controls: BASS, TREBLE, BALANCE, LOUDNESS. Tuner: AUTO/MANUAL tuning, PRESET memory. Speaker: A/B selector. Input Selection: CD, TAPE, PHONO, VIDEO/AUX.

Connecting Devices

Audio Sources: CD player, tape deck, turntable, video components. Speakers: Main and remote speakers.

Turn off receiver before connecting devices.
Match input jacks to source components (RCA cables).
Connect turntable to PHONO input only.
Select appropriate input source on front panel.

Tip: Use quality cables for best audio performance.

Audio Setup

Supports various audio sources and surround sound processing.

Source selection: Choose appropriate input (CD, TAPE, PHONO, VIDEO/AUX).
Volume adjustment: Use VOLUME control; MUTE for temporary silence.
Tone adjustment: Adjust BASS and TREBLE to suit listening environment.
Speaker selection: Choose A, B, or A+B speakers as needed.
Surround sound: Engage Dolby Pro Logic for movie viewing.
Headphone use: Plug headphones into front panel jack for private listening.

WARNING! Do not exceed recommended speaker impedance. Avoid high volume levels for extended periods.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Clean controls with contact cleaner if needed.

CAUTION! Do not use liquid cleaners; avoid moisture entering ventilation openings.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power cord connection; verify outlet function.
No sound	Speaker connections/volume	Check speaker wires; ensure volume not at minimum; verify speaker selection.
Poor radio reception	Antenna placement	Reposition FM antenna; ensure AM loop antenna connected.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to IR sensor.
Distorted sound	Input level/speakers	Reduce source volume; check speaker impedance compatibility.

Reset: Disconnect power for 30 seconds to reset microprocessor.

Service: Contact authorized Kenwood service center for repairs.