Kenwood KR-V6070 Manual

The Kenwood KR-V6070 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, multiple audio/video inputs, AM/FM tuner, digital sound field processing, remote control, and comprehensive connectivity options. Below are key sections for features, installation, setup, operation, specifications, and troubleshooting.

Features at a Glance

Key components: Dolby Digital/DTS decoder, AM/FM tuner, multiple audio/video inputs, remote control, digital sound processing.

Feature	Description
Dolby Digital Decoder	5.1 channel surround sound processing
DTS Decoder	Digital Theater Systems decoding capability
AM/FM Tuner	40 station preset memory
Audio Inputs	Multiple line-level inputs including CD, Tape, Phono
Video Inputs	Composite and S-Video inputs
Digital Inputs	Optical and coaxial digital audio inputs
Speaker Outputs	Front, center, and surround channel outputs
Remote Control	Full-function remote with learning capability
Sound Field Processing	Multiple DSP modes for various listening environments
Power Output	100 watts per channel (front)

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

1. Connect speakers: Match polarity (+/-) for front, center, and surround speakers.
2. Connect audio sources: Use appropriate inputs for CD player, tape deck, turntable.
3. Connect video sources: Use composite or S-Video inputs for VCR, DVD player.
4. Connect antenna: AM loop antenna and FM wire antenna.
5. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow initial setup procedure.

1. Speaker setup: Configure speaker size and distance in setup menu.
2. Input assignment: Assign appropriate inputs to source components.
3. Tuner preset: Auto-scan and store AM/FM stations.
4. Sound calibration: Use test tone to balance speaker levels.
5. Remote setup: Program remote for other components if needed.

CAUTION! Disconnect power before making any connections.

Specifications

• Power Output: 100W x 5 (front: 100W, center: 100W, surround: 100W)
• Total Harmonic Distortion: 0.08%
• Frequency Response: 10Hz - 100kHz
• Signal-to-Noise Ratio: 100dB
• Input Sensitivity: 200mV
• Digital Inputs: Optical x2, Coaxial x2
• Analog Inputs: Phono, CD, Tape, Video 1-3
• Video Inputs: Composite x3, S-Video x2
• Power Requirements: 120V AC, 60Hz, 450W
• Dimensions: 440mm x 430mm x 171mm (W x D x H)

Controls and Settings

Front Panel: POWER, VOLUME, INPUT SELECTOR, TUNER PRESETS, SOUND MODE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, TUNER PRESETS, SOUND MODE, NUMERIC KEYPAD.

Audio Settings: Bass, Treble, Balance, Loudness. Video Settings: Input selection, video conversion. Tuner Settings: Auto/manual tuning, preset memory. DSP Modes: Hall, Theater, Stadium, Live, Mono Movie. Setup Menu: Speaker configuration, input rename, system reset.

Connecting Devices

Audio: Phono, CD, Tape inputs. Video: Composite, S-Video inputs. Digital: Optical, coaxial inputs.

1. Turn off receiver and components before connecting.
2. Use high-quality cables for best performance.
3. Match input types to source components.
4. Connect digital sources for Dolby Digital/DTS playback.
5. Select appropriate input on receiver.

Tip: Use optical cables for digital audio sources to prevent ground loops.

Audio/Video Operation

Supports various audio formats and surround modes.

1. Select input: Choose appropriate source (CD, DVD, etc.).
2. Adjust volume: Use volume control on front panel or remote.
3. Select sound mode: Choose from stereo, Dolby Digital, DTS, or DSP modes.
4. Video switching: Select video input corresponding to audio source.
5. Mute: Press MUTE for temporary silence.
6. Tone controls: Adjust bass and treble to preference.
7. Loudness: Engage for better low-volume listening.

WARNING! Avoid excessive volume levels to prevent hearing damage and speaker damage.

Tuner Operation

AM/FM tuner with 40 station presets.

1. Select tuner input: Press TUNER on front panel or remote.
2. Choose band: Select AM or FM.
3. Tune stations: Use manual tuning or auto-scan.
4. Store presets: Hold MEMORY button, then press preset number.
5. Recall presets: Press numbered preset buttons.
6. Stereo/Mono: Auto-switches for FM; manual for AM.

Tip: For best FM reception, extend and position FM antenna properly.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and heat sources.

CAUTION! Do not use chemical cleaners. Ensure proper ventilation around unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. Manufactured under license from Dolby Laboratories. DTS and DTS Digital Surround are registered trademarks. For support, contact Kenwood customer service or visit authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord, outlet	Check power connection; try different outlet; check fuse.
No sound	Input selection, mute	Verify input selection; check mute status; speaker connections.
Poor FM reception	Antenna positioning	Reposition FM antenna; check connections.
Remote not working	Batteries, obstruction	Replace batteries; ensure clear path to sensor.
No surround sound	Source, settings	Verify source material; check surround mode selection.
Distorted sound	Volume, connections	Reduce volume; check speaker wire connections.

Reset: Disconnect power for 5 minutes, then reconnect.

Service: Contact authorized Kenwood service center for repairs.