Kenwood KR-V8010 Manual

The Kenwood KR-V8010 is a high-performance audio/video receiver featuring Dolby Pro Logic surround sound, multiple audio/video inputs, digital tuning with 30 station presets, remote control capability, and advanced audio processing. With 100 watts per channel, this receiver delivers powerful sound for home theater systems. Below are key sections for features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Modes 8. Remote Control 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dolby Pro Logic decoder, digital tuner, multiple audio/video inputs, remote control, front panel controls.

Feature	Description
Power Output	100W per channel (front), 30W (center), 30W (rear)
Dolby Pro Logic	Surround sound decoding
Tuner	AM/FM with 30 station presets
Audio Inputs	CD, Tape, Phono, Video/Aux
Video Inputs	Composite video inputs
Speaker Terminals	Front, Center, Rear speaker outputs
Headphone Jack	Front panel 3.5mm connector
Remote Control	Full function remote included
Tone Controls	Bass, Treble, Balance adjustments
Display	Fluorescent display with dimmer

Installation

Unpack and inspect contents. Place on stable, ventilated surface.

Connect speakers: Match polarity (+/-) for front, center, and rear channels.
Connect audio sources: Use appropriate input jacks for CD, tape, phono.
Connect video sources: Use video inputs for VCR, DVD players.
Connect antenna: AM loop and FM wire antennas included.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; initialize system settings.

Set speaker configuration: Small/Large for each channel in setup menu.
Program radio stations: Auto-scan or manual tune, then store presets.
Set audio preferences: Adjust bass, treble, balance to listening position.
Configure surround sound: Select Dolby Pro Logic mode for video sources.
Test all inputs: Verify each source is working properly.

CAUTION! Keep away from moisture and heat sources.

Specifications

Power Output: 100W x 2 (front), 30W (center), 30W (rear)
Total Harmonic Distortion: 0.08%
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: 80dB
Input Sensitivity: Phono: 2.5mV, Line: 150mV
Tuner Section: AM/FM stereo, 30 presets
Surround Modes: Dolby Pro Logic, Hall, Theater
Power Requirements: 120V AC, 60Hz, 280W
Dimensions: 17-1/8" W x 5-7/8" H x 14-3/4" D
Weight: 20.3 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECTOR, VOLUME, TONE controls, HEADPHONE jack.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, TUNER PRESETS, SURROUND MODE, TONE CONTROLS.

Audio Controls: BASS, TREBLE, BALANCE, LOUDNESS. Surround Settings: Dolby Pro Logic center mode, delay time, hall/theater effects. Tuner: Auto/manual tuning, preset memory. Display: Dimmer control, signal strength meter.

Connecting Devices

Audio: Phono, CD, Tape, Video/Aux inputs. Video: Composite video inputs. Speakers: Front L/R, Center, Rear L/R.

Turn off receiver before connecting devices.
Use quality cables for best performance.
Match input selector to connected source.
Ensure speaker wires are securely connected.
Connect FM antenna for best reception.

Tip: Use shielded cables for phono input to reduce noise.

Audio Modes

Multiple listening modes for different content types.

Dolby Pro Logic: For movie surround sound decoding.
Stereo: Standard 2-channel audio.
Hall: Simulates concert hall acoustics.
Theater: Enhanced surround for dramatic effect.
Mono: For AM radio or mono sources.

Adjust center channel level and delay time for optimal surround effect.

Remote Control

Full-function remote controls all receiver functions.

Button	Function
POWER	Turns receiver on/off
INPUT SELECT	Cycles through audio sources
VOLUME +/-	Adjusts master volume
MUTE	Temporarily silences audio
TUNER PRESETS	Selects stored radio stations
SURROUND MODE	Cycles through audio modes
TONE	Accesses bass/treble controls
Numeric Keys	Direct station selection

Batteries: Use two AA batteries; replace when range decreases.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep ventilation openings clear.

CAUTION! Do not use liquid cleaners. Avoid magnetic fields near tuner section.

Regulatory Information

FCC Part 15: Class B digital device compliant. Manufactured by Kenwood Corporation. Copyright protection systems used. For service, contact authorized Kenwood service center. Specifications subject to change without notice.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord, outlet	Check power connection; try different outlet
No sound	Input selection, volume	Verify input selection; check volume level
Poor FM reception	Antenna placement	Reposition FM antenna; ensure proper connection
No surround sound	Mode selection, connections	Select Dolby Pro Logic mode; check speaker wires
Remote not working	Batteries, obstruction	Replace batteries; ensure clear path to sensor
Hum or noise	Grounding, cables	Check cable connections; ensure proper grounding

Reset: Disconnect power for 30 seconds to reset microprocessor.

Service: Contact authorized Kenwood service center for repairs.