kenwood krf v5200d manual

The Kenwood KRF-V5200D is a high-performance audio/video receiver with Dolby Digital and DTS decoding, 5.1 channel surround sound, multiple audio/video inputs, AM/FM tuner, digital optical/coaxial inputs, speaker calibration system, and remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio/Video Operation 8. Tuner Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with display panel, Remote Control, Speaker terminals, Audio/Video inputs, Digital inputs, AM/FM antenna terminals.

Feature	Description
Dolby Digital/DTS Decoding	5.1 channel surround sound processing
Power Output	100W per channel (front), 25W (center/surround)
Audio Inputs	Multiple analog and digital inputs
Video Inputs	Composite and S-Video inputs
Digital Inputs	Optical and coaxial digital audio
Tuner	AM/FM with 30 station presets
Speaker Calibration	Automatic speaker setup system
Remote Control	Multi-function learning remote
Display	FL fluorescent display
Power Supply	AC 120V, 60Hz

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect speakers: Match polarity (+/-) to speaker terminals.
Connect audio sources: Use appropriate audio inputs for CD, DVD, etc.
Connect video sources: Use composite or S-Video inputs.
Connect antennas: AM loop and FM wire antennas.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow initial setup procedure.

Speaker setup: Run auto calibration for optimal sound.
Input assignment: Configure audio/video inputs for connected devices.
Tuner setup: Auto-scan and store AM/FM stations.
Surround settings: Select Dolby Digital or DTS mode as needed.
Volume calibration: Set appropriate listening levels.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Audio Section: Dolby Digital, DTS, Pro Logic decoding
Power Output: Front: 100W x 2, Center: 25W, Surround: 25W x 2
Frequency Response: 20Hz - 20kHz
Signal-to-Noise: 100dB (line inputs)
Inputs: 4 audio, 3 video, 2 digital (optical/coaxial)
Outputs: Speaker terminals, video monitor output
Tuner: AM/FM with 30 presets
Power Requirements: AC 120V, 60Hz, 230W
Dimensions: 17-1/8" W x 6-1/8" H x 15-3/4" D
Weight: 22.5 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TUNER PRESETS, SURROUND MODE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER, NUMERIC, MENU.

Audio Settings: Bass, Treble, Balance, Loudness, Surround modes (Dolby Digital, DTS, Pro Logic). Video Settings: Input selection, video enhancement. Tuner Settings: Preset memory, auto scan. System Settings: Speaker configuration, calibration, input assignment.

Connecting Devices

Audio Sources: CD player, DVD player, tape deck. Video Sources: DVD player, VCR, game console.

Turn off all components before connecting.
Connect audio cables to appropriate inputs (CD, DVD, etc.).
Connect video cables to video inputs.
Connect digital audio cables if available.
Connect speakers observing correct polarity.

Tip: Use high-quality cables for best audio/video performance.

Audio/Video Operation

Supports various audio and video sources with surround sound processing.

Select input: Press INPUT SELECT for desired source.
Adjust volume: Use VOLUME control or remote.
Select surround mode: Choose Dolby Digital, DTS, or Pro Logic.
Audio adjustments: Use BASS, TREBLE controls as needed.
Mute: Press MUTE for temporary silence.
Video switching: Select corresponding video input for audio source.

WARNING! Do not exceed maximum volume levels to prevent hearing damage.

Tuner Operation

AM/FM tuner with 30 station presets.

Select tuner: Press TUNER on front panel or remote.
Tune stations: Use TUNING buttons or direct frequency entry.
Store presets: Tune to station, press and hold preset button.
Recall presets: Press numbered preset buttons.
Auto scan: Automatically scans and stores available stations.

Note: Ensure proper antenna connection for best reception.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and heat sources.

CAUTION! Do not use liquid cleaners or aerosols. Ventilation openings must remain unobstructed.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; ensure outlet is working.
No sound	Speaker connections/mute	Check speaker wires; ensure mute is off; verify input selection.
Poor radio reception	Antenna placement	Reposition antennas; ensure proper connection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to sensor.
Overheating	Ventilation blocked	Ensure adequate ventilation; clear vents.
No surround sound	Source/connections	Verify digital connection; check source material format.

Reset: Disconnect power for 30 seconds to reset microprocessor.

Service: Contact authorized Kenwood service center for repairs.