Kenwood KRF V7010 Manual

The Kenwood KRF V7010 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, 5.1 channel surround sound, multiple audio/video inputs, digital optical and coaxial inputs, AM/FM tuner with 40 presets, speaker setup calibration, and remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup 8. Tuner Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with display panel, Remote Control, Speaker terminals, Audio/Video inputs, Digital inputs, AM/FM antenna terminals.

Feature	Description
Dolby Digital/DTS Decoding	5.1 channel surround sound processing
Power Output	100W per channel (front), 25W (center/surround)
Audio Inputs	6 analog audio inputs, 2 digital optical, 1 coaxial
Video Inputs	4 composite video, 2 S-Video
Tuner	AM/FM with 40 station presets
Speaker Terminals	Front, Center, Surround channels
Headphone Jack	3.5mm stereo headphone output
Remote Control	Full-function learning remote
Setup Microphone	Included for automatic speaker calibration
Display Panel	FL fluorescent display with dimmer control

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect speakers: Match polarity (+/-) for front, center, and surround speakers.
Connect audio sources: Use appropriate audio inputs for CD player, tape deck, etc.
Connect video sources: Use composite or S-video inputs for VCR, DVD player.
Connect digital sources: Use optical or coaxial inputs for digital audio.
Connect antennas: AM loop antenna and FM wire antenna.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block ventilation openings.

First-Time Setup

Power on receiver; follow on-screen display prompts.

Speaker setup: Use included microphone for automatic speaker calibration.
Input assignment: Assign appropriate inputs to each source component.
Tuner setup: Auto-scan for AM/FM stations and store presets.
Surround mode: Select preferred surround sound mode (Dolby Digital, DTS, etc.).
Volume level: Set initial volume and balance settings.

CAUTION! Keep magnetic objects away from speakers and receiver.

Specifications

Power Output: 100W x 2 (front), 25W x 3 (center/surround)
Total Harmonic Distortion: 0.08% (1kHz)
Frequency Response: 20Hz - 20kHz (±3dB)
Signal-to-Noise Ratio: 100dB (line inputs)
Input Sensitivity: 200mV (line), 2.5mV (MM phono)
Digital Inputs: 2 optical, 1 coaxial
Video Inputs: 4 composite, 2 S-Video
Tuner Section: AM/FM with 40 presets
Power Consumption: 220W maximum
Dimensions: 440mm x 151mm x 398mm (W x H x D)

Controls and Settings

Front Panel: POWER, INPUT SELECTOR, VOLUME, TONE controls, HEADPHONE JACK.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER PRESETS, NUMERIC KEYPAD.

Audio Settings: BASS, TREBLE, BALANCE, LOUDNESS, SURROUND MODE. Input Setup: Assign inputs to sources, rename inputs. Tuner: Auto/manual tuning, preset memory. Speaker: Level calibration, distance settings, crossover frequency. System: Display dimmer, sleep timer, factory reset.

Connecting Devices

Audio: CD player, tape deck, turntable (phono). Video: DVD player, VCR, game console. Digital: CD transport, DVD player with digital output.

Turn off all components before connecting.
Use high-quality cables for best performance.
Match input types (analog/digital) to source outputs.
Connect video monitor to monitor output.
Select input via INPUT SELECTOR or remote.

Tip: Use digital connections for best audio quality from digital sources.

Audio Setup

Supports various surround modes and audio enhancements.

Speaker calibration: Use setup microphone for automatic level/distance calibration.
Surround modes: Select Dolby Digital, DTS, Pro Logic, or stereo modes.
Audio adjustments: Adjust bass, treble, balance, and loudness compensation.
Input level: Set appropriate input levels for each source.
Night mode: Dynamic range compression for late-night listening.
Direct mode: Bypass tone controls for pure audio signal.

WARNING! Do not connect speakers with impedance less than 6 ohms.

Tuner Operation

AM/FM tuner with 40 station presets.

Auto tuning: Press and hold TUNING buttons for automatic station search.
Manual tuning: Press TUNING buttons briefly for manual station selection.
Preset memory: Store favorite stations in 40 available presets.
Preset scan: Scan through stored preset stations.
FM mode: Select stereo or mono reception for weak signals.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior; compressed air for vents.

CAUTION! Do not use chemical cleaners; avoid liquid contact. Keep in dry environment.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers. Manufactured under license from Dolby Laboratories.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power cord connection; verify outlet function.
No sound	Input selection/speakers	Verify input selection; check speaker connections; adjust volume.
Distorted sound	Speaker impedance/volume	Check speaker impedance; reduce volume level.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to IR sensor.
Poor FM reception	Antenna placement	Reposition FM antenna; use external antenna for weak areas.
No surround sound	Source/connections	Ensure digital source; check digital cable connections.

Reset: Disconnect power for 30 seconds; restore power for soft reset.

Service: Contact authorized Kenwood service center for repairs.