Kenwood KSC 30 Manual

The Kenwood KSC 30 is a high-quality car audio component system featuring 3-inch coaxial speakers with polypropylene cones, 20W RMS power handling, 4-ohm impedance, and wide frequency response. Designed for optimal sound reproduction in vehicle environments with easy installation and versatile mounting options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 3-inch coaxial speakers, mounting hardware, wiring connectors, user manual.

Installation

Unpack and inspect contents. Ensure proper mounting location.

1. Disconnect vehicle battery: Remove negative terminal for safety.
2. Remove existing speakers: Use appropriate tools for door panels or dash.
3. Prepare mounting surface: Clean area and ensure proper fit.
4. Connect wiring: Match positive and negative terminals correctly.
5. Secure speakers: Use provided mounting hardware.
6. Test operation: Reconnect battery and test sound output.

WARNING! Always disconnect vehicle battery before installation to prevent electrical shorts.

First-Time Setup

After installation, configure audio settings for optimal performance.

1. Balance and fade: Adjust head unit settings for proper speaker balance.
2. Equalizer settings: Set appropriate EQ for speaker characteristics.
3. Volume testing: Test at various volume levels to ensure clean sound.
4. Break-in period: Allow 10-15 hours of moderate use for optimal performance.

CAUTION! Avoid maximum volume during initial break-in period.

Specifications

• Speaker Type: 3-inch coaxial
• Power Handling: 20W RMS, 40W max
• Impedance: 4 ohms
• Frequency Response: 80Hz - 20kHz
• Sensitivity: 88dB at 1W/1m
• Cone Material: Polypropylene
• Mounting Depth: 1.5 inches
• Magnet Weight: 6 oz ferrite
• Terminals: Quick-connect
• Cut-out Diameter: 2.75 inches

Controls and Settings

All audio controls managed through vehicle head unit.

Head Unit Controls: Volume, Balance, Fader, Bass, Treble, Equalizer settings.

Speaker-specific adjustments: Proper mounting angle and positioning affect sound quality. No onboard controls on speakers themselves.

Connecting Devices

Direct connection to vehicle audio system head unit.

1. Identify speaker wires: Positive and negative from head unit.
2. Match polarity: Ensure correct positive-to-positive connection.
3. Secure connections: Use proper connectors or soldering.
4. Test phase: Verify all speakers are in phase for proper sound staging.

Tip: Use multimeter to verify polarity if wire colors are unclear.

Operation Guide

Standard operation through vehicle audio system.

1. Power on: Start vehicle or turn on head unit.
2. Volume control: Adjust through head unit controls.
3. Source selection: Choose radio, CD, or auxiliary input.
4. Tone adjustment: Use bass, treble, and EQ settings as needed.
5. Balance/fade: Adjust for optimal listening position.

WARNING! Avoid prolonged operation at maximum volume to prevent damage.

Maintenance

Regular inspection and cleaning for optimal performance.

Cleaning: Use soft, dry cloth only; avoid liquids and abrasive cleaners.

Inspection: Check connections periodically for corrosion or looseness.

CAUTION! Do not use water or cleaning solutions on speaker components.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European markets. Copyright © Kenwood Corporation. All trademarks property of their respective owners. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Reset: Check head unit reset function if available.

Service: Contact authorized Kenwood service centers for technical support.