Kenwood KTLD60X15 Tall Fridge Stainless Steel Manual

The Kenwood KTLD60X15 is a premium tall refrigerator featuring stainless steel construction, advanced cooling technology, adjustable glass shelves, LED lighting, digital temperature control, frost-free operation, energy-efficient compressor, and multiple storage compartments. With a capacity of 60 liters and dimensions optimized for modern kitchens, this refrigerator offers reliable performance with features including door alarm, reversible doors, and eco-mode. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Storage Configuration 7. Temperature Management 8. Energy Efficiency 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel exterior, adjustable glass shelves, LED interior lighting, digital temperature display, frost-free technology, reversible doors, door alarm system.

Feature	Description
Stainless Steel Construction	Durable and easy-to-clean exterior finish
Adjustable Glass Shelves	Customizable storage space for various items
LED Interior Lighting	Energy-efficient bright illumination
Digital Temperature Control	Precise temperature adjustment from 2°C to 8°C
Frost-Free Technology	No need for manual defrosting
Reversible Doors	Can be configured for left or right opening
Door Alarm	Audible alert when door left open
Eco Mode	Energy-saving operation setting
Crisper Drawers	Humidity-controlled vegetable storage
Egg Trays	Dedicated storage for eggs

Installation

Unpack and inspect contents. Position in well-ventilated area.

Remove all packaging materials and protective film.
Place on level floor with minimum 10cm clearance on all sides for ventilation.
Allow refrigerator to stand upright for 4 hours before plugging in.
Connect to dedicated 220-240V AC power outlet.
Configure door swing direction if needed using reversible door feature.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation space around unit.

First-Time Setup

After installation, follow these initial setup steps.

Plug into power outlet and turn on using power button.
Set initial temperature to 4°C using digital control panel.
Allow 24 hours for temperature to stabilize before loading food.
Adjust shelves according to your storage needs.
Test door alarm by leaving door open for 2 minutes.

CAUTION! Do not overload shelves beyond recommended weight capacity.

Specifications

Capacity: 60 liters
Exterior Finish: Stainless Steel
Temperature Range: 2°C to 8°C
Shelves: 3 adjustable tempered glass shelves
Door Storage: 2 door racks, egg tray
Lighting: LED
Defrost System: Frost-free automatic
Power Supply: 220-240V AC, 50Hz
Energy Rating: A++
Annual Energy Consumption: 150 kWh
Dimensions (HxWxD): 150cm x 60cm x 65cm
Net Weight: 45 kg

Controls and Settings

Digital control panel located on front exterior.

Controls: Power button, Temperature adjustment buttons (+/-), Eco mode button, Alarm reset button.

Temperature Settings: Adjust between 2°C and 8°C in 1°C increments. Eco Mode: Reduces energy consumption by optimizing compressor operation. Alarm Reset: Silences door alarm and resets system. Display: Shows current temperature and operational status.

Storage Configuration

Optimize storage for food safety and organization.

Top shelves: Ready-to-eat foods, dairy products, drinks
Middle shelves: Leftovers, cooked meats
Bottom shelves: Raw meat, fish (in sealed containers)
Crisper drawers: Fruits and vegetables
Door shelves: Condiments, juices, butter

Tip: Allow hot food to cool before refrigerating to maintain temperature efficiency.

Temperature Management

Maintain optimal temperature for food preservation.

Recommended temperature: 4°C for general storage
Adjust seasonally: Lower in summer, higher in winter
Monitor temperature display regularly
Allow temperature to stabilize after adding large quantities of food
Use eco mode for energy savings during normal use

WARNING! Do not set temperature below 2°C as this may freeze some foods.

Energy Efficiency

A++ energy rating with eco-mode feature.

Use eco-mode for regular operation
Ensure door seals are clean and tight
Minimize door opening frequency and duration
Position away from heat sources
Regularly clean condenser coils

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth.

Exterior: Wipe with damp cloth and mild detergent, dry thoroughly
Interior: Clean shelves and drawers with baking soda solution
Door seals: Clean with soapy water, check for damage
Condenser coils: Vacuum every 6 months
Drain hole: Clear if applicable

CAUTION! Do not use abrasive cleaners or solvents. Never pour water directly on any part.

Regulatory Information

CE certified and complies with EU energy efficiency standards. Manufactured according to ISO 9001 quality standards. RoHS compliant. For support, visit www.kenwood-electronics.co.uk or contact customer service at 0344 736 0109. Disposal: Follow WEEE regulations for electronic waste recycling.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power issue/thermostat	Check power connection; ensure thermostat set correctly; wait 24 hours after first use
Excessive noise	Uneven placement/objects touching	Level the refrigerator; ensure nothing touching walls; check for loose parts
Water leakage	Blocked drain/door seal	Check drain hole; ensure door closing properly; clean door seals
Door alarm sounds	Door left open	Close door properly; check for obstructions; reset alarm
Ice formation	Door seal/humidity	Check door seals; reduce door opening frequency; ensure proper temperature setting
Light not working	LED failure/power	Check power supply; contact service for LED replacement

Reset: Unplug for 5 minutes then restart if experiencing operational issues.

Service: 0344 736 0109; www.kenwood-electronics.co.uk