Kenwood KVT 514 Installation Manual

The Kenwood KVT 514 is a multimedia DVD receiver with 6.95-inch wide TFT display, built-in Bluetooth, USB connectivity, HD Radio, SiriusXM ready, GPS navigation capability, and support for various audio/video formats. Features include touch screen control, dual camera input, steering wheel control interface, and extensive audio adjustments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation Preparation 3. Wiring Connections 4. Specifications 5. Controls and Settings 6. Connecting External Devices 7. System Setup 8. Bluetooth Pairing 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6.95-inch TFT LCD display, DVD receiver, Remote Control, USB port, Bluetooth antenna, GPS antenna input, camera inputs, steering wheel control interface.

FeatureDescription
Display6.95-inch wide TFT color LCD touch panel
BluetoothHands-free calling and audio streaming
USB PortFor USB devices and iPod/iPhone connectivity
GPS Antenna InputFor navigation system connection
Camera InputsDual camera capability for rear/front view
Steering Wheel ControlInterface for vehicle steering wheel controls
HD RadioDigital radio reception capability
SiriusXM ReadySatellite radio compatibility
Audio OutputMOSFET 50W x 4 power output
Video OutputRCA composite video output

Installation Preparation

Before installation, gather all necessary tools and components. Ensure vehicle battery is disconnected.

  1. Remove factory radio: Use appropriate removal tools for your vehicle model.
  2. Check wiring harness: Verify compatibility with vehicle wiring system.
  3. Prepare mounting kit: Use vehicle-specific mounting bracket if required.
  4. Test fit: Ensure unit fits properly in dashboard opening.

WARNING! Disconnect vehicle battery before beginning installation to prevent electrical shorts or damage.

Wiring Connections

Connect all wires according to wiring diagram provided with installation kit.

  1. Power connections: Connect yellow (B+), red (ACC), and black (GND) wires.
  2. Speaker connections: Connect front/rear speaker wires matching polarity.
  3. Antenna connections: Connect vehicle antenna adapter and GPS antenna.
  4. Accessory connections: Connect steering wheel control interface, camera inputs, USB extension.
  5. Secure all connections with crimp connectors or solder and heat shrink.

CAUTION! Double-check all connections before applying power to prevent damage to unit or vehicle electrical system.

Specifications

Controls and Settings

Access settings via touch screen interface. Physical buttons: POWER, VOLUME, SOURCE, EJECT.

Touch Screen: Source selection, menu navigation, audio adjustments, phone functions, navigation controls.

Audio Settings: Bass, treble, balance, fader, loudness, EQ presets. System Settings: Display brightness, button illumination, clock, language, Bluetooth settings. Source Settings: Radio presets, CD/DVD options, USB settings, camera settings.

Connecting External Devices

USB: Connect USB devices or iPod/iPhone cable. Bluetooth: Pair mobile devices. Cameras: Connect rear view camera to camera input.

  1. USB Connection: Use approved USB cable for iPod/iPhone connection.
  2. Bluetooth Pairing: Enable Bluetooth on mobile device and select "Kenwood" from available devices.
  3. Camera Installation: Mount camera and route video cable to head unit.
  4. GPS Antenna: Place GPS antenna on dashboard with clear view of sky.

Tip: Use high-quality cables for best performance and reliability.

System Setup

Initial configuration after installation completion.

  1. Reconnect vehicle battery and turn on ignition.
  2. Initial setup: Set language, time, date, and display preferences.
  3. Radio setup: Auto-store FM/AM stations or manually set presets.
  4. Audio calibration: Adjust EQ settings and speaker balance for optimal sound.
  5. Steering wheel controls: Program steering wheel interface if equipped.
  6. Camera setup: Configure camera display settings and trigger options.

WARNING! Ensure all wiring is properly secured and insulated before final installation.

Bluetooth Pairing

Pair mobile devices for hands-free calling and audio streaming.

  1. Enable Bluetooth on mobile device and set to discoverable mode.
  2. On Kenwood unit, navigate to Bluetooth settings and select "Pair New Device".
  3. Select "Kenwood" from available devices list on mobile device.
  4. Enter PIN code (typically 0000 or 1234) if prompted.
  5. Confirm pairing on both devices.
  6. Test phone functions and audio streaming.

Note: Some phones may require additional permissions for contact sync and call history.

Maintenance & Care

Clean display with soft, dry cloth only. Avoid chemical cleaners or abrasive materials.

CAUTION! Do not use alcohol, solvents, or ammonia-based cleaners on display surface. Keep unit dry and avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with part 15 of FCC rules. Bluetooth qualified design. For support, visit www.kenwood.com or contact authorized Kenwood service center. Copyright © Kenwood Corporation.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerWiring/fuseCheck power connections; verify fuse condition; test battery voltage.
No soundSpeaker wiring/muteVerify speaker connections; check mute setting; test speaker output.
Bluetooth not connectingPairing/device compatibilityDelete old pairing; restart both devices; check compatibility.
Display issuesSettings/connectionsAdjust display settings; check video cable connections; reset unit.
GPS not workingAntenna placementReposition GPS antenna; check antenna connection; verify satellite signal.

Reset: Press reset button or disconnect battery for 30 seconds.

Service: Contact authorized Kenwood service center for technical support.

Kenwood KVT 514 Installation Manual © - All Rights Reserved 2025