Kenwood KVT 817DVD Manual

The Kenwood KVT 817DVD is a 7-inch motorized LCD monitor with built-in DVD player, AM/FM tuner, and advanced audio/video capabilities. Features include touchscreen control, GPS navigation compatibility, USB input, auxiliary inputs, Bluetooth connectivity, iPod direct control, and customizable display settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. System Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7-inch motorized LCD monitor, DVD player, AM/FM tuner, touchscreen controls, remote control, USB port, auxiliary inputs, Bluetooth module.

Feature	Description
Motorized LCD monitor	7-inch TFT LCD that retracts when not in use
DVD player	Plays DVD-Video, DVD-R/RW, CD, MP3, WMA
AM/FM tuner	30 station presets (18 FM, 12 AM)
Touchscreen control	Full interactive touchscreen interface
USB input	For USB storage devices and iPod connectivity
Auxiliary inputs	RCA A/V inputs for external devices
Bluetooth	Wireless audio streaming and hands-free calling
GPS ready	Compatible with Kenwood navigation systems
Power output	50W x 4 channels (MOSFET power IC)
Display adjustments	Color, contrast, brightness, and angle settings

Installation

Professional installation recommended. Ensure vehicle is parked and ignition is off.

Disconnect negative battery terminal before beginning installation.
Remove factory radio and prepare wiring harness using appropriate adapter.
Connect all wiring: power, ground, speaker wires, and antenna connector.
Connect additional components: GPS antenna, Bluetooth module, USB cable.
Secure unit in dashboard and test all functions before final assembly.

WARNING! Installation requires automotive electrical knowledge. Incorrect installation may damage vehicle electronics.

First-Time Setup

Power on unit; follow initial setup prompts on touchscreen.

Language selection: Choose preferred language for menu display.
Clock setting: Set current time and date format.
Radio presets: Scan and store favorite AM/FM stations.
Bluetooth pairing: Connect mobile phone for hands-free operation.
Display settings: Adjust screen angle, brightness, and color balance.

CAUTION! Do not operate touchscreen while driving. Park vehicle for initial setup.

Specifications

Display: 7-inch TFT LCD motorized monitor
Video System: NTSC/PAL compatible
Audio Output: 50W x 4 (MOSFET power IC)
Tuner: AM/FM with 30 presets
Supported Media: DVD, DVD-R/RW, CD, CD-R/RW, MP3, WMA
Inputs: USB, AUX, iPod direct, Bluetooth audio
Outputs: Preamp outputs (front, rear, subwoofer)
Power Requirement: 14.4V DC (negative ground)
Dimensions: DIN size (178mm x 100mm)

Controls and Settings

Primary control via touchscreen interface. Physical buttons: POWER, VOLUME, SOURCE, EJECT.

Touchscreen Menus: SOURCE selection, AUDIO settings, SETUP menu, NAVIGATION (if equipped).

Audio: Bass, treble, balance, fader, loudness, subwoofer control. Video: Screen angle, brightness, contrast, color temperature. System: Clock, language, button beep, illumination color. Source settings: Bluetooth, USB, AUX input configuration.

Connecting Devices

USB: Front panel USB port for flash drives and iPod. AUX: RCA inputs for external audio/video sources. Bluetooth: Wireless connection for phones and audio devices.

Ensure unit is powered on and vehicle is in park for video sources.
Connect USB device: Use front panel USB port for direct connection.
Pair Bluetooth: Access Bluetooth menu to search and pair devices.
AUX input: Connect RCA cables from external device to rear inputs.

Tip: Use genuine Kenwood cables for optimal performance and compatibility.

Playing DVD Media

Supports DVD-Video, DVD-R/RW, CD-DA, MP3 CDs, WMA CDs.

Insert disc: Press EJECT button, place disc label side up.
Play: Screen will automatically extend and playback will begin.
Navigation: Use touchscreen controls for menu, title, and chapter selection.
Special functions: Repeat, random play, zoom, and angle selection available.
Stop/Eject: Press STOP then EJECT to remove disc.
Screen position: Manual control of monitor angle via settings menu.

WARNING! Do not touch laser lens. Use only clean, undamaged discs. Video playback may be restricted while vehicle is in motion.

System Settings

Access system settings via SETUP menu on touchscreen.

Display: Screen angle, brightness, contrast, auto-off timer
Audio: EQ settings, time alignment, crossover frequencies
Bluetooth: Pairing, phonebook transfer, audio streaming quality
Security: Code entry for theft protection
System reset: Restore factory default settings

Care & Maintenance

Clean screen with soft, dry cloth only. Do not use chemicals or abrasive materials.

CAUTION! Do not spray cleaners directly on unit. Keep discs clean and free of scratches. Store unit with screen retracted when not in use.

Regulatory Information

FCC Part 15 compliant. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Kenwood Corporation. All trademarks are property of their respective owners. For support, visit www.kenwood.com or contact authorized Kenwood service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Screen does not extend	Safety lock/wiring	Check parking brake connection; verify proper installation
No sound from speakers	Wiring/settings	Check speaker connections; verify audio settings; check mute
Disc not reading	Disc damage/format	Clean disc; ensure compatible format; check for scratches
Bluetooth not connecting	Pairing mode/distance	Enable pairing mode; move device closer; delete and re-pair
USB device not recognized	Format/compatibility	Use FAT32 format; check device compatibility; try different USB cable

Reset: Hold SOURCE button while turning on unit to reset system.

Service: Contact authorized Kenwood service center for repairs.