Kenwood MC 50 Microphone Manual

The Kenwood MC 50 is a high-quality dynamic microphone designed for use with Kenwood amateur radio transceivers and communication equipment. Featuring a cardioid pickup pattern, 6.3mm (1/4") connector, durable construction, and optimized frequency response for clear voice transmission. Below are key sections for features, specifications, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Specifications 4. Connection and Setup 5. Operation Guidelines 6. Maintenance and Care 7. Troubleshooting 8. Warranty Information

Features at a Glance

Key components: Dynamic microphone element, 6.3mm (1/4") phone plug, push-to-talk switch, adjustable stand mount, and durable metal construction.

FeatureDescription
Microphone TypeDynamic moving coil
Pickup PatternCardioid (unidirectional)
Connector6.3mm (1/4") phone plug
Cable Length2 meters (6.5 feet)
Push-to-Talk SwitchMomentary contact switch
Frequency Response100Hz - 10,000Hz
Impedance600 ohms
WeightApproximately 350g
Stand MountStandard 5/8" thread with adapter
ConstructionMetal body with rubberized grip

Package Contents

Unpack and verify all components are present.

NOTE: Contact your dealer immediately if any items are missing or damaged.

Specifications

Connection and Setup

Proper connection ensures optimal performance and compatibility.

  1. Identify the microphone jack on your Kenwood transceiver (typically labeled "MIC")
  2. Firmly insert the 6.3mm plug into the microphone jack
  3. Ensure the connection is secure and fully seated
  4. For stand mounting: Attach the included adapter if needed and secure to microphone stand
  5. Adjust microphone position for comfortable operation

WARNING! Do not force the connector. Ensure proper alignment before insertion.

Operation Guidelines

For optimal voice transmission quality and microphone longevity.

  1. Hold microphone approximately 2-4 inches from your mouth
  2. Speak directly into the front grille at normal conversation level
  3. Press and hold the push-to-talk switch when transmitting
  4. Release the switch when listening
  5. Avoid covering the side ports as this affects the cardioid pattern
  6. Use normal speaking voice - shouting may cause distortion
  7. Store in provided pouch when not in use

TIP: The cardioid pattern rejects sounds from the sides and rear, improving voice clarity.

Maintenance and Care

Proper maintenance ensures long-term reliability and performance.

CAUTION! Never immerse in water or other liquids. Do not disassemble.

Troubleshooting

SymptomPossible CauseCorrective Action
No audio transmissionLoose connectionCheck microphone plug is fully inserted in jack
Intermittent audioDamaged cableInspect cable for breaks or damage; replace if necessary
Weak or distorted audioWrong microphone distanceHold microphone 2-4 inches from mouth; speak directly into grille
Push-to-talk not workingSwitch failureTest with another microphone; contact service if defective
Background noise pickupWrong speaking positionUse cardioid pattern properly; speak into front, not sides
No response from equipmentIncompatible equipmentVerify compatibility with your Kenwood transceiver model

Warranty Information

Kenwood MC 50 microphone is covered by a 1-year limited warranty from date of purchase against defects in materials and workmanship. Warranty does not cover damage from misuse, abuse, modification, or normal wear and tear. For warranty service, contact authorized Kenwood service center with proof of purchase.

Service Contact: Kenwood authorized service centers

Support: www.kenwood.com

Kenwood MC 50 Microphone Manual © - All Rights Reserved 2025