Kenwood Micro Hi Fi Component System Manual

The Kenwood Micro Hi Fi Component System is a compact audio system featuring AM/FM tuner, CD player, cassette deck, auxiliary input, remote control, bass/treble controls, digital tuning with preset stations, auto-reverse cassette mechanism, repeat/shuffle modes, and sleep timer. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Audio Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with CD player and cassette deck, Remote Control, Speaker terminals, AUX input, Headphone jack, AC power input.

Feature	Description
CD player	Plays audio CDs with repeat/shuffle functions
Cassette deck	Auto-reverse mechanism with Dolby NR
AM/FM tuner	Digital tuning with 30 station presets
AUX input	For external audio sources (MP3 players, etc.)
Headphone jack	For private audio listening
AC power input	For power connection
Speaker terminals	For connecting left/right speakers
OPEN/CLOSE	Opens CD compartment
BASS/TREBLE controls	Adjusts audio equalization
POWER	Turns system on/off

Installation

Unpack and inspect contents. Place on stable surface away from heat sources.

Connect speakers: Match red/black terminals to speaker wires (red to red, black to black).
Connect antenna: Attach AM loop antenna and FM wire antenna.
Connect AC power: Plug power cord into wall outlet.
Connect auxiliary devices: Use AUX input for external audio sources.

WARNING! Ensure proper ventilation; do not block vents. Keep away from moisture.

First-Time Setup

Power on system; follow initial setup procedure.

Set clock: Press CLOCK button and set current time.
Program radio stations: Use auto-scan or manual tuning to save presets.
Adjust audio settings: Set bass/treble to preference.
Test all functions: Verify CD, cassette, and tuner operation.

CAUTION! Place on stable surface; ensure speakers are properly connected.

Specifications

Audio Output: 50W total power (25W x 2)
Tuner: AM/FM with digital display
CD Player: Supports CD, CD-R, CD-RW
Cassette: Auto-reverse with Dolby B noise reduction
Inputs: AUX, headphone jack
Controls: Bass, treble, balance, loudness
Presets: 30 station memory (15 AM, 15 FM)
Power Source: 120V AC, 60Hz
Dimensions: Compact micro system design

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP, TUNING, BASS, TREBLE, VOLUME.

Remote: POWER, Numeric buttons, OPEN/CLOSE, MODE, VOLUME, MUTE, PRESET, BASS/TREBLE.

Audio: BASS (-10 to +10), TREBLE (-10 to +10), BALANCE (L/R), LOUDNESS (On/Off). Tuner: AUTO/MANUAL tuning, PRESET memory. CD: REPEAT (Track/All), SHUFFLE, PROGRAM play. Cassette: DOLBY NR, AUTO-REVERSE.

Connecting Devices

Speakers: Use supplied speaker cables. AUX: 3.5mm stereo jack for external devices.

Turn off system before connecting devices.
Match speaker polarity (red to red, black to black).
Select source via MODE button (CD, TUNER, TAPE, AUX).

Tip: Use quality cables for best audio performance.

Playing Media

Supports CDs, cassettes, radio, and auxiliary input.

CD playback: Press OPEN/CLOSE, load CD, press PLAY.
Cassette playback: Insert cassette, press PLAY.
Radio: Select TUNER mode, tune to desired station.
Auxiliary: Connect device to AUX input, select AUX mode.
Skip tracks: Use PREV/NEXT buttons.
Repeat: Press REPEAT for track or all repeat.
Shuffle: Press SHUFFLE for random CD play.
Sleep timer: Set sleep timer for automatic shutoff.

WARNING! Do not touch laser lens; keep cassettes away from magnets.

Audio Features

Equalization: Adjustable bass and treble controls. Loudness: Enhances bass at low volumes. Balance: Adjusts left/right speaker balance. Dolby NR: Reduces tape hiss on cassette playback.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Clean CD lens with specialized cleaner only.

CAUTION! Do not use solvents; keep cassettes and CDs in protective cases.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Volume/speakers	Check volume level; verify speaker connections.
CD won't play	Disc/dirty lens	Ensure disc is clean; use CD lens cleaner.
Poor radio reception	Antenna placement	Adjust antenna position; extend FM wire fully.
Cassette won't play	Tape head dirty	Clean tape head with cleaning cassette.

Reset: Unplug for 30 seconds to reset system.

Service: 1-800-536-9663; www.kenwood.com