Kenwood NEXEDGE NX-700 Manual

The Kenwood NEXEDGE NX-700 is a professional digital/analog two-way radio featuring NEXEDGE digital technology, 256-channel capacity, IP54/55 rugged construction, MIL-STD 810 C/D/E compliance, wide frequency range (136-174 MHz, 400-520 MHz), digital voice encryption, GPS capability, and advanced data applications. Below are key sections for safety, features, installation, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Programming and Configuration 7. Digital/Analog Operation 8. Advanced Features 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Rugged housing, LCD display, programmable buttons, antenna connector, accessory port, speaker/microphone, battery compartment.

Feature	Description
NEXEDGE Digital	6.25 kHz equivalent digital operation
Channel Capacity	Up to 256 channels programmable
Frequency Range	VHF: 136-174 MHz, UHF: 400-520 MHz
IP Rating	IP54/55 dust and water resistant
Battery Life	Up to 12 hours typical operation
Display	Backlit LCD with channel/status info
Encryption	Digital voice scrambling capability
GPS Option	Built-in GPS receiver
Data Capability	Text messaging, status reporting
Power Output	VHF: 45W, UHF: 40W (high power)

Installation

Unpack and inspect contents. Install battery and antenna.

Battery installation: Align battery contacts, slide until click.
Antenna installation: Screw antenna clockwise until snug.
Accessory connection: Use accessory port for external devices.
Belt clip: Attach to back of radio for portable use.

WARNING! Do not operate without proper antenna. Ensure battery is fully charged before first use.

First-Time Setup

Power on radio; initialize settings.

Initial power on: Press and hold power button until beep.
Channel selection: Use channel selector knob or up/down buttons.
Volume adjustment: Turn volume knob to desired level.
Display settings: Configure via programming software.
Frequency programming: Use KPG-111D/KPG-169D software.

CAUTION! Only qualified personnel should program frequencies. Ensure proper licensing.

Specifications

Frequency Range: VHF 136-174 MHz, UHF 400-520 MHz
Channel Capacity: 256 channels
Power Output: VHF: 5-45W, UHF: 5-40W
Battery: Li-ion 1800 mAh typical
Operating Temp: -30°C to +60°C
Dimensions: 140H × 65W × 42D mm (with standard battery)
Weight: Approx. 650g with battery and antenna
Modulation: 16K0F3E (FM), 8K50F1E (digital)
Data Interface: K interface, USB programmable

Controls and Settings

Front Panel: Power/Volume knob, Channel selector, PTT button, Programmable buttons, LCD display.

Top Panel: Antenna connector, On/Off/Volume control, Channel selector.

Display: Shows channel number, mode (digital/analog), battery status, signal strength. Programmable buttons: Can be assigned functions like monitor, scan, emergency, high/low power. Audio: Volume control, squelch settings, tone controls. Mode selection: Digital/analog mode switching via programming.

Programming and Configuration

Use KPG-111D (UHF) or KPG-169D (VHF) programming software.

Connect programming cable to radio and PC.
Launch programming software.
Read current configuration from radio.
Program frequencies, tones, and features.
Write configuration back to radio.

Tip: Backup configuration files before making changes.

Digital/Analog Operation

Supports both digital and analog modes.

Transmit: Press and hold PTT button, speak clearly.
Receive: Release PTT to listen.
Mode selection: Digital mode provides clearer audio and encryption.
Channel selection: Rotate channel knob or use up/down buttons.
Scan function: Enable scan to monitor multiple channels.
Emergency mode: Programmable emergency button for distress.
Text messaging: Send and receive text messages (digital mode).

WARNING! Ensure proper licensing for frequency use. Follow local regulations.

Advanced Features

Digital Voice: Enhanced audio quality, privacy. GPS Tracking: Real-time location reporting. Data Applications: Text messaging, status reporting. Encryption: Secure communications. Scan Functions: Priority scan, talk-back scan.

Maintenance & Care

Clean with dry cloth only. Avoid harsh chemicals. Regular battery charging. Antenna inspection.

CAUTION! Do not immerse in water. Use only Kenwood-approved accessories.

Regulatory Information

FCC Part 90 certified for land mobile radio service. Complies with relevant ETSI standards for Europe. Industry Canada certified. For support, visit www.kenwood.com/communications or contact authorized Kenwood dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged/defective	Charge battery; replace if necessary.
No transmission	PTT issue/programming	Check PTT button; verify channel programming.
Poor reception	Antenna/position	Check antenna connection; move to better location.
No audio	Volume/speaker	Adjust volume; check speaker connection.
Programming failure	Cable/software	Check programming cable; reinstall software.

Reset: Use programming software to reset to factory defaults if needed.

Service: Contact authorized Kenwood service center; www.kenwood.com/communications