Kenwood NX 5200 Manual

The Kenwood NX 5200 is a professional digital/analog two-way radio designed for commercial and industrial use. It features digital and analog operation modes, IP67 waterproof rating, large LCD display, programmable buttons, built-in Bluetooth, GPS capability, and robust construction for harsh environments. Below are key sections for safety, features, installation, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Programming and Operation 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital/Analog operation, LCD display, Programmable buttons, Speaker/Microphone, Antenna connector, Accessory port, USB programming port.

Feature	Description
Digital/Analog Operation	Supports both digital and analog communication modes
LCD Display	Large backlit display with channel and status information
Programmable Buttons	Customizable function buttons for quick access
IP67 Rating	Dustproof and waterproof for harsh environments
Built-in Bluetooth	Wireless connectivity for headsets and data
GPS Capability	Optional GPS for location tracking
Power Button	Turns radio on/off
Channel Selector	Rotary knob for channel selection
Volume Control	Adjusts audio output level
PTT Button	Push-to-talk for transmitting

Installation

Unpack and inspect contents. Install battery and antenna.

Install battery: Align battery with radio contacts, slide until it clicks into place.
Attach antenna: Screw antenna clockwise onto antenna connector.
Charge battery: Use approved charger for initial charge (4-6 hours).
Install accessories: Connect speaker mic, earpiece, or other accessories as needed.

WARNING! Use only Kenwood-approved batteries and accessories. Do not use damaged batteries.

First-Time Setup

Power on radio; configure basic settings.

Power on: Press and hold Power button until display lights up.
Select mode: Use menu to choose digital or analog operation.
Set volume: Adjust volume control to comfortable listening level.
Program channels: Use programming software to configure channels and groups.
Test communication: Perform radio check on designated channel.

CAUTION! Ensure proper programming before use in critical applications.

Specifications

Frequency Range: VHF: 136-174 MHz, UHF: 400-470 MHz
Output Power: 5W/1W (VHF), 4W/1W (UHF)
Battery Life: Up to 12 hours typical use
IP Rating: IP67 dust and waterproof
Display: 7-segment LCD with backlight
Programming: KPG-111D/112D programming software
Operating Temp: -30°C to +60°C
Dimensions: 58(W) x 130(H) x 37(D) mm
Weight: Approx. 350g with battery

Controls and Settings

Access functions via front panel buttons and programming menu.

Front Panel: Power, Volume, Channel Selector, PTT, Programmable Buttons.

Basic Settings: Channel selection, Volume control, Squelch levels, Power settings. Advanced Settings: Digital/analog mode selection, Privacy codes, Scan settings, Tone functions. Display Settings: Backlight timeout, Contrast, Display mode. Audio Settings: Volume levels, Tone settings, Mic gain.

Connecting Accessories

Accessory port for speaker mics, earpieces, programming cables.

Turn off radio before connecting accessories.
Align accessory connector with radio port.
Push firmly until it clicks into place.
For programming: Connect USB programming cable to computer and radio.

Tip: Use only Kenwood-approved accessories for optimal performance.

Programming and Operation

Requires KPG-111D/112D programming software.

Install software: Load KPG software on Windows computer.
Connect radio: Use programming cable to connect radio to computer.
Read data: Read current configuration from radio.
Program channels: Set frequencies, tones, power levels for each channel.
Write data: Upload new configuration to radio.
Verify: Test all programmed channels and functions.

WARNING! Backup configuration before making changes. Incorrect programming may violate FCC regulations.

Advanced Features

Digital Voice: Clear audio in digital mode. GPS Tracking: Real-time location data. Bluetooth: Wireless accessory connectivity. Scan Function: Monitor multiple channels. Emergency Alert: Quick emergency notification.

Care & Maintenance

Clean with damp cloth only. Avoid solvents and abrasives. Regular battery checks. Antenna inspection. Software updates as available.

CAUTION! Do not immerse in water beyond IP67 specifications. Use only approved cleaning methods.

Regulatory Information

FCC Part 90 certified for land mobile radio service. Complies with relevant safety and emissions standards. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized Kenwood dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery/connections	Check battery charge; ensure proper installation; try different battery.
No transmission	Settings/antenna	Check PTT function; verify channel programming; inspect antenna connection.
Poor reception	Location/antenna	Move to better location; check antenna for damage; verify squelch settings.
Display issues	Settings/power	Adjust contrast; check battery level; reset to factory defaults if needed.
Programming failure	Cable/software	Verify cable connection; reinstall software; check computer drivers.

Reset: Menu > System > Reset to factory defaults.

Service: Contact authorized Kenwood service center for repairs.