Kenwood NX 5700 Manual

The Kenwood NX 5700 is a professional digital mobile radio featuring VHF/UHF operation, digital/analog compatibility, IP55 weatherproof rating, large LCD display, programmable buttons, GPS capability, and robust construction for commercial and public safety use. Below are key sections for safety, features, installation, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Programming and Operation 8. Digital Features 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large backlit LCD display, programmable function keys, microphone connector, antenna port, power connector, accessory port.

Feature	Description
Frequency Range	VHF: 136-174MHz, UHF: 400-520MHz
Digital Mode	NXDN® digital and FM analog operation
IP Rating	IP55 dust and water resistant
Display	Large LCD with backlight
Programmable Keys	Multiple customizable function keys
GPS Option	Built-in GPS receiver capability
Power Output	Up to 50W (VHF), 45W (UHF)
Channels	Up to 512 channels programmable
Scanning	Priority, programmable scan
Encryption	Basic and advanced encryption options

Installation

Unpack and inspect contents. Mount in vehicle using appropriate bracket.

Mounting: Secure radio using mounting bracket in stable location.
Antenna connection: Connect antenna to antenna port securely.
Power connection: Connect red wire to positive terminal, black wire to negative terminal.
Microphone: Connect microphone to microphone jack.
Accessories: Connect optional accessories to accessory port.

WARNING! Ensure proper fuse rating. Disconnect negative battery terminal before installation.

First-Time Setup

Power on radio; configure basic settings.

Power connection: Verify proper voltage (13.8V DC nominal).
Channel programming: Use programming software to set frequencies.
Display settings: Adjust contrast and backlight timing.
Audio settings: Set volume levels and squelch settings.
Function keys: Assign desired functions to programmable keys.

CAUTION! Use only Kenwood approved programming software and cables.

Specifications

Frequency Range: VHF 136-174MHz, UHF 400-520MHz
Mode: NXDN® Digital and FM Analog
Power Output: VHF: 5-50W, UHF: 5-45W
Channels: Up to 512 programmable channels
IP Rating: IP55 dust and water resistant
Operating Voltage: 13.8V DC ±15%
Current Consumption: Receive: 0.8A, Transmit: 11A max
Dimensions: 160(W) × 55(H) × 165(D) mm
Weight: Approximately 1.3 kg
Operating Temp: -30°C to +60°C

Controls and Settings

Front Panel: Power/Volume knob, Channel selector, Programmable keys, LCD display.

Microphone: PTT, programmable buttons, channel selector, emergency button.

Display: Channel name/number, signal strength, mode indicator, GPS status. Settings: Channel edit, scan setup, tone settings, digital ID, encryption settings. Programming: Use KPG-111D/112D software for channel and system configuration.

Connecting Accessories

Microphone: Standard microphone jack. External Speaker: External speaker jack. Data: Accessory port for data and control.

Turn off radio before connecting accessories.
Match connectors to appropriate ports.
Secure all connections to prevent disconnection.
Configure accessory settings in programming software.

Tip: Use only Kenwood approved accessories for optimal performance.

Programming and Operation

Supports conventional and trunked systems.

Channel selection: Rotate channel selector knob.
Transmit: Press PTT button on microphone.
Scan: Enable scan function via programmable key.
Emergency: Press emergency button for emergency mode.
Digital operation: Select digital channels for NXDN operation.
GPS: View location data when GPS accessory installed.
Encryption: Enable encryption for secure communications.
Monitor: Use monitor function to open squelch.

WARNING! Ensure proper licensing for operating frequencies.

Digital Features

NXDN® Digital Operation: Improved audio quality, better coverage, enhanced privacy. Digital ID: Individual and group calling. Text Messaging: Send and receive text messages. GPS Tracking: Real-time location reporting.

Maintenance & Care

Disconnect power before cleaning. Use soft, dry cloth for exterior cleaning. Avoid solvents and abrasive cleaners.

CAUTION! Do not immerse in water. Keep connectors clean and dry.

Regulatory Information

FCC Part 90: Certified for land mobile radio service. Complies with relevant FCC rules for digital emissions. Copyright © Kenwood Corporation. For technical support and service, contact authorized Kenwood service centers or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection/fuse	Check power connections; verify fuse integrity; check voltage.
No transmission	PTT/microphone	Check microphone connection; verify PTT function; check channel settings.
Poor reception	Antenna/connections	Verify antenna connection; check antenna for damage; check location.
No audio	Volume/speaker	Adjust volume; check speaker connection; verify squelch setting.
Programming failure	Cable/software	Verify cable connection; check software version; restart programming.

Reset: Use programming software for factory reset if needed.

Service: Contact authorized Kenwood service center for repairs.