Kenwood NX200 Manual

The Kenwood NX200 is a professional two-way radio designed for commercial and industrial use, featuring digital/analog operation, UHF frequency range, 128 channels, IP54/55 weatherproof rating, MIL-STD 810 compliance for durability, programmable buttons, LCD display, built-in voice encryption, and multiple signaling options. Below are key sections for safety, features, installation, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Programming and Configuration 7. Operation Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LCD display, programmable buttons, antenna connector, speaker/microphone, battery compartment, charging contacts, accessory port.

Feature	Description
Frequency Range	UHF 400-470 MHz
Channels	128 programmable channels
Operation Modes	Digital and Analog compatibility
Weatherproof Rating	IP54/55 dust and water resistant
Durability	MIL-STD 810 compliant
Display	LCD with backlight
Encryption	Built-in voice privacy
Battery	Lithium-ion rechargeable
Power Output	Up to 5W programmable
Programming	KPG-111D software required

Installation

Unpack and inspect contents. Install battery and antenna.

Battery installation: Align battery contacts, slide battery onto radio until it clicks.
Antenna installation: Screw antenna clockwise onto antenna connector.
Belt clip: Attach to rear of radio if required.
Charging: Place radio in charging cradle, ensure charging indicator lights.

WARNING! Use only Kenwood approved batteries and accessories. Do not force components during installation.

First-Time Setup

Power on radio; configure basic settings.

Power on: Rotate volume knob clockwise.
Channel selection: Use channel selector knob.
Squelch adjustment: Press and hold MONI button while adjusting squelch.
Display settings: Access menu for backlight timeout and contrast.
Initial programming: Use KPG-111D software for frequency programming.

CAUTION! Program frequencies according to local regulations. Unauthorized frequencies may violate FCC rules.

Specifications

Frequency Range: UHF 400-470 MHz
Channels: 128 programmable
Power Output: 1W/5W programmable
Battery Life: Up to 12 hours typical use
Operating Temp: -30°C to +60°C
Dimensions: 58W x 130H x 37D mm (with standard battery)
Weight: Approx. 380g with battery
Modulation: 16KΦF3E / 11KΦF3E
Data Capability: MDC1200, 2-tone, 5-tone
Warranty: 3 years limited

Controls and Settings

Front Panel: Volume knob, channel selector, PTT button, programmable buttons, LCD display.

Side Buttons: MONI (monitor), programmable side buttons, accessory connector.

Menu Settings: Channel edit, scan settings, signaling options, display settings, power settings, encryption settings. Programmable buttons can be assigned to functions like scan, power level, emergency, or encryption toggle.

Programming and Configuration

Requires KPG-111D programming software and programming cable.

Install KPG-111D software on Windows PC.
Connect radio to PC using programming cable.
Read current configuration from radio.
Program frequencies, channels, and settings.
Write configuration to radio.
Verify programming by testing all channels.

Tip: Always backup current configuration before making changes.

Operation Modes

Digital and analog operation with multiple features.

Basic operation: Select channel, press PTT to transmit, release to receive.
Scan mode: Enable scan to monitor multiple channels.
Emergency mode: Programmable emergency button for distress signals.
Encryption: Enable voice privacy for secure communications.
Data modes: Support for text messaging and GPS (with accessory).
Power saving: Automatic battery save mode extends battery life.

WARNING! Transmit only on authorized frequencies. Monitor channel before transmitting.

Maintenance

Regular maintenance ensures optimal performance.

Cleaning: Use soft, dry cloth. Battery care: Charge battery fully before first use. Storage: Store in cool, dry place. Antenna inspection: Check for damage regularly.

CAUTION! Do not use solvents or abrasive cleaners. Keep away from extreme temperatures.

Regulatory Information

FCC Part 90: Certified for Land Mobile Radio Service. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized Kenwood dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged/defective	Charge battery; replace if necessary.
No transmission	PTT button/antenna	Check PTT function; ensure antenna properly connected.
Poor reception	Antenna/squelch setting	Check antenna connection; adjust squelch level.
Display issues	Backlight/contrast	Adjust display settings in menu.
Programming failure	Cable/software	Check programming cable connection; reinstall software.

Reset: Menu > System > Reset to factory defaults if required.

Service: Contact authorized Kenwood service center for repairs.