Kenwood Oil Filled Radiator Heater Manual

The Kenwood Oil Filled Radiator Heater is a portable electric heating unit designed for efficient room heating with safety features including overheat protection, tip-over switch, adjustable thermostat, multiple heat settings, and energy-saving operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Safety Features 7. Operation Guide 8. Energy Saving Tips 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Oil-filled radiator fins, adjustable thermostat, heat settings selector, power indicator light, carry handle, wheels for mobility, safety tip-over switch.

Feature	Description
Oil-filled radiator	Provides consistent, even heat distribution
Adjustable thermostat	Allows temperature control from 15°C to 30°C
Heat settings	3 heat settings (600W, 900W, 1500W)
Power indicator light	Shows when heater is operating
Carry handle	For easy transport
Wheels	For mobility between rooms
Tip-over switch	Automatically turns off if knocked over
Overheat protection	Safety cut-off when temperature exceeds safe limits
Cable storage	Built-in cord storage compartment
Energy efficient	Maintains temperature with minimal power consumption

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials and protective covers.
Position heater on firm, level floor away from flammable materials.
Ensure minimum clearance of 1 meter from walls and furniture.
Plug into standard 230V AC power outlet.

WARNING! Keep away from curtains, furniture, and other combustible materials. Do not use in bathrooms or other high-moisture areas.

First-Time Setup

Position heater and connect to power.

Place heater in desired location with adequate clearance.
Plug into grounded electrical outlet.
Turn thermostat knob to maximum setting initially.
Select desired heat setting using the power selector.
Adjust thermostat to maintain comfortable temperature.

CAUTION! Heater surfaces become hot during operation. Keep children and pets away from heater.

Specifications

Power Rating: 1500W maximum
Heat Settings: 3 settings (600W, 900W, 1500W)
Thermostat Range: 15°C to 30°C
Heating Element: Permanent sealed oil
Safety Features: Overheat protection, tip-over switch
Dimensions: Approximately 60cm x 25cm x 65cm
Weight: Approximately 15kg
Power Cord: 1.5 meters with UK plug
Voltage: 230V AC, 50Hz
Room Coverage: Up to 20 square meters

Controls and Settings

Main controls located on top control panel.

Power Selector: 0 (Off), I (600W), II (900W), III (1500W)

Thermostat Knob: Rotate to set desired temperature level. Heater will cycle on and off to maintain set temperature.

Indicator Light: Illuminates red when heater is actively heating.

Carry Handle: Located on side for easy transport.

Safety Features

Built-in safety mechanisms for worry-free operation.

Tip-Over Protection: Automatically shuts off if unit is knocked over
Overheat Protection: Thermal cut-off prevents overheating
Cool-Touch Housing: External surfaces remain safe to touch
Stable Base: Wide footprint prevents tipping
Automatic Safety Cut-off: Activates if internal temperature exceeds safe limits

Important: Never cover heater or block air vents during operation.

Operation Guide

Simple operation for efficient heating.

Ensure heater is on stable, level surface.
Plug into electrical outlet.
Turn thermostat knob to maximum position.
Select desired heat setting (I, II, or III).
Adjust thermostat to maintain comfortable temperature.
Heater will cycle on/off automatically to maintain temperature.
To turn off, set power selector to 0 position.
Unplug when not in use for extended periods.

Tip: Use lower settings for maintaining temperature, higher settings for quick heating.

Energy Saving Tips

Maximize efficiency and reduce energy costs.

Use thermostat to maintain consistent temperature rather than turning on/off frequently
Close doors and windows in room being heated
Use lower heat settings for maintenance heating
Position heater in central location for even heat distribution
Clean heater regularly to maintain efficiency
Use timer if available to heat room only when needed

Care & Cleaning

Unplug and allow to cool completely before cleaning.

Wipe exterior with soft, dry cloth
Use vacuum cleaner with brush attachment to remove dust from fins
Do not use water, liquids, or chemical cleaners
Ensure air vents are clear of obstructions
Store in dry location when not in use

CAUTION! Never immerse heater in water or use wet cloth for cleaning.

Regulatory Information

CE certified and complies with European safety standards. Manufactured to meet EN 60335-2-30 safety requirements for household heating appliances. This appliance is designed for indoor domestic use only. For support, visit www.kenwood.eu or contact customer service at the number provided in your warranty documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater not turning on	Power source/thermostat setting	Check power outlet; ensure thermostat is above room temperature; check circuit breaker.
Heater cycles on/off frequently	Thermostat setting	Adjust thermostat to higher setting; ensure adequate room size for heater capacity.
Unusual odor	First use/dust accumulation	Normal during first use; runs for few hours to dissipate. Clean if dust present.
Heater tips over and shuts off	Uneven surface/tip-over switch activated	Place on level surface; wait 5 minutes before restarting.
Reduced heating performance	Dust accumulation/thermostat setting	Clean heater fins; check thermostat setting; ensure proper voltage.

Reset: Unplug for 10 minutes if safety cut-off activates.

Service: Contact authorized Kenwood service center for repairs.