Kenwood ProTalk LT User Manual

The Kenwood ProTalk LT is a professional-grade two-way radio featuring UHF/VHF frequency bands, 16 channels, built-in LED flashlight, weather alert functionality, NOAA weather radio reception, privacy codes, voice activation, hands-free operation, LCD display, belt clip, and rechargeable battery. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating Modes 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD display with backlight, 16 programmable channels, built-in LED flashlight, weather alert system, rechargeable battery pack, belt clip, and charging cradle.

Feature	Description
LCD Display	Shows channel, battery level, and mode indicators
LED Flashlight	Built-in emergency lighting
Weather Alert	NOAA weather radio reception with alert tones
16 Channels	Programmable UHF/VHF frequencies
Privacy Codes	38 CTCSS and 83 DCS codes
Voice Activation	Hands-free operation capability
Battery Indicator	Visual battery status display
Scan Function	Automatic channel scanning
Monitor Button	Quick channel monitoring
Power Switch	On/Off and volume control

Installation

Unpack and inspect contents. Install battery and accessories.

Battery installation: Align battery contacts, slide into place until click.
Antenna attachment: Screw antenna clockwise until snug.
Belt clip: Attach to back of radio for portable use.
Charging cradle: Place radio in cradle for charging.

WARNING! Do not force battery; ensure proper alignment. Keep away from water and extreme temperatures.

First-Time Setup

Power on radio; configure initial settings.

Channel selection: Use channel selector knob to choose desired channel.
Volume adjustment: Turn power/volume knob to comfortable listening level.
Squelch setting: Adjust squelch control to eliminate background noise.
Weather alert: Enable NOAA weather reception in settings menu.

CAUTION! Use only Kenwood-approved accessories. Avoid dropping radio.

Specifications

Frequency Range: UHF 400-470 MHz / VHF 136-174 MHz
Channels: 16 programmable
Output Power: 5 watts maximum
Battery: 1500mAh Li-ion rechargeable
Operating Time: Up to 12 hours typical use
Weather Channels: 7 NOAA weather channels
Privacy Codes: 38 CTCSS, 83 DCS
Dimensions: 5.1" x 2.3" x 1.4"
Weight: 10.2 oz with battery

Controls and Settings

Access functions via front panel controls and menu system.

Front Panel: Power/Volume knob, Channel selector, PTT button, Monitor, Menu, Flashlight button.

Menu Settings: Channel programming, Privacy codes, Scan settings, Weather alert, VOX sensitivity, Backlight timeout, Battery save mode, Reset functions.

Connecting Accessories

Headset: 3.5mm jack for external audio. Programming cable: USB connection for channel programming.

Turn off radio before connecting accessories.
Align connectors properly; do not force connections.
Secure all connections before operation.

Tip: Use only Kenwood-approved accessories for optimal performance.

Operating Modes

Supports multiple operating modes for various applications.

Normal operation: Select channel, press PTT to transmit.
Scan mode: Automatically scans programmed channels.
Weather mode: Monitors NOAA weather broadcasts.
VOX mode: Voice-activated transmission.
Emergency alert: Sends distress signal.

WARNING! Ensure proper licensing for frequency use. Follow FCC regulations.

Advanced Features

VOX Operation: Enable in menu for hands-free use. Privacy Codes: Set CTCSS/DCS to avoid interference. Weather Alert: Automatic severe weather notifications.

Care & Maintenance

Clean with dry cloth only. Store in dry location. Charge battery regularly.

CAUTION! Do not use chemicals or solvents. Avoid extreme temperatures.

Regulatory Information

FCC Part 15 and Part 90 compliant. This device may not cause harmful interference and must accept any interference received. Copyright © 2025 Kenwood Corporation. For support, visit www.kenwood.com or contact 1-800-950-5005.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged	Charge battery; check connections.
Poor reception	Antenna loose	Tighten antenna; check for damage.
No transmission	PTT button issue	Check PTT function; verify channel.
Battery drains quickly	Old battery	Replace battery; check settings.
No audio	Volume setting	Adjust volume; check squelch.

Reset: Menu > System > Factory Reset if available.

Service: 1-800-950-5005; www.kenwood.com