Kenwood R SE7 Manual

The Kenwood R SE7 is a high-performance stereo receiver featuring AM/FM tuner, multiple audio inputs, speaker outputs, tone controls, and remote control operation. With 100 watts per channel output, digital tuning display, preset stations, and various audio enhancement features, it delivers exceptional sound quality for home audio systems. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: AM/FM stereo tuner, multiple audio inputs, speaker terminals, remote control, LCD display, tone controls.

Feature	Description
AM/FM Tuner	Digital tuning with 30 station presets
Audio Inputs	CD, AUX, Phono, Tape inputs
Speaker Outputs	A/B speaker selection, 100W per channel
Remote Control	Full function remote operation
LCD Display	Frequency, volume, input source display
Tone Controls	Bass, treble, balance adjustments
Headphone Jack	For private listening
Power Switch	Main power on/off control
Volume Control	Rotary knob for audio level
Input Selector	Source selection (CD, AUX, Phono, Tape)

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

1. Connect speakers: Use speaker wire to connect to A/B speaker terminals.
2. Connect audio sources: Use appropriate cables for CD player, turntable, tape deck.
3. Connect antenna: Attach FM wire antenna and AM loop antenna.
4. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use correct speaker impedance.

First-Time Setup

Power on receiver; initialize system settings.

1. Set clock: Press CLOCK button and set current time.
2. Tune stations: Use manual tuning or auto-scan to find stations.
3. Store presets: Press MEMORY button to save favorite stations.
4. Adjust tone: Set bass, treble, and balance to preference.
5. Configure speakers: Select A/B speaker output as needed.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 100 watts per channel (8 ohms)
• Frequency Response: 20Hz - 20kHz
• Total Harmonic Distortion: 0.08%
• Signal-to-Noise Ratio: 85dB
• Tuner Section: AM/FM stereo with 30 presets
• Inputs: Phono, CD, AUX, Tape
• Outputs: Speaker A/B, headphones, tape out
• Power Requirements: 120V AC, 60Hz
• Dimensions: 17.1" W × 5.9" H × 14.4" D
• Weight: 22 lbs

Controls and Settings

Front Panel: POWER, VOLUME, INPUT SELECTOR, BASS, TREBLE, BALANCE, TUNING, PRESET buttons.

Remote: POWER, VOLUME, MUTE, INPUT SELECT, PRESET, TUNING, DISPLAY.

Tone Controls: Bass (±10dB), Treble (±10dB), Balance (L/R adjustment). Tuner: Manual/Auto tuning, preset memory, stereo/mono selection. General: Clock setting, display brightness, sleep timer.

Connecting Devices

Audio Sources: Phono, CD, AUX, Tape inputs. Speakers: A/B speaker terminals.

1. Turn off receiver before connecting devices.
2. Match input type to source (Phono for turntable, etc.).
3. Use proper speaker wire gauge for speaker connections.
4. Select input source via INPUT selector.

Tip: Use high-quality cables for best audio performance.

Radio Operation

AM/FM stereo reception with preset memory.

1. Select band: Press FM/AM button to choose band.
2. Tune stations: Use TUNING buttons or auto-scan.
3. Store presets: Tune to station, press MEMORY, select preset number.
4. Recall presets: Press PRESET buttons for stored stations.
5. Stereo/Mono: Press MONO for weak FM signals.

WARNING! Position antennas for best reception away from interference sources.

Audio Features

Tone Controls: Adjust bass and treble response. Loudness: Enhance bass at low volumes. Balance: Adjust left/right channel balance. Mute: Temporary audio mute. Headphone: Private listening output.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Avoid liquids and abrasive cleaners.

CAUTION! Do not use chemical cleaners; keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. Manufactured under license from Kenwood Corporation. Copyright © 2025 Kenwood; all rights reserved. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; ensure outlet is working.
No sound	Volume/mute/speakers	Check volume level; ensure mute is off; verify speaker connections.
Poor radio reception	Antenna placement	Reposition antennas; extend FM wire fully.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to sensor.
Distorted sound	Input level/speakers	Reduce source volume; check speaker impedance.

Reset: Disconnect power for 30 seconds to reset.

Service: 1-800-536-9663; www.kenwood.com