Kenwood Radiator Heater Manual

The Kenwood Radiator Heater is a portable electric heating unit featuring adjustable thermostat control, multiple heat settings, safety tip-over switch, overheat protection, cool-touch exterior, easy-roll casters, and energy-efficient operation. Designed for residential use with 120V AC power. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Heating element, thermostat control, safety switches, casters, power cord, and control panel.

Safety Precautions

Important safety instructions for proper operation and hazard prevention.

1. Keep combustible materials at least 3 feet from all sides of heater.
2. Do not use in bathrooms, laundry areas, or other high-humidity locations.
3. Never cover or block air intake or outlet grilles.
4. Always plug directly into wall outlet; do not use extension cords.
5. Unplug when not in use and before cleaning or maintenance.

WARNING! Risk of fire or electric shock. Do not operate if damaged. Keep children and pets away from hot surfaces.

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

1. Remove all packaging materials and protective films.
2. Ensure casters are properly attached and roll smoothly.
3. Position heater on hard surface away from furniture and curtains.
4. Plug into grounded 120V AC outlet.
5. Turn thermostat to minimum setting before turning on.

CAUTION! Ensure adequate clearance on all sides. Do not use on carpets or near water sources.

Specifications

• Model: Kenwood KHR-2000
• Power: 120V AC, 60Hz
• Wattage: 750W (Low), 1500W (High)
• Heating Area: Up to 150 square feet
• Thermostat Range: 60°F to 85°F
• Safety Features: Tip-over switch, overheat protection
• Dimensions: 23" H x 16" W x 7" D
• Weight: 15 lbs
• Cord Length: 6 feet
• Warranty: 1-year limited warranty

Controls and Operation

Control Panel: POWER switch, HEAT SETTING (Low/High), THERMOSTAT dial.

Operation Steps:

1. Ensure heater is on stable surface and plugged in.
2. Turn THERMOSTAT dial to desired temperature setting.
3. Select HEAT SETTING: Low for maintenance heat, High for quick warming.
4. Power indicator light will illuminate when unit is operating.
5. Thermostat light shows when heating element is active.

Temperature Control: Unit cycles on/off automatically to maintain set temperature. For energy savings, use lower thermostat settings.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and safety.

1. Unplug heater and allow to cool completely before cleaning.
2. Wipe exterior with soft, dry cloth only.
3. Use vacuum with brush attachment to remove dust from grilles.
4. Check power cord regularly for damage.
5. Ensure casters move freely and are clean.

CAUTION! Never immerse in water or use liquid cleaners. Do not operate if damaged.

Storage Instructions

Proper storage during off-season periods.

1. Unplug and allow unit to cool completely.
2. Clean thoroughly following maintenance instructions.
3. Wrap power cord around storage hooks.
4. Store in dry location protected from dust and moisture.
5. Keep in original box if available, or cover with cloth.

Tip: Store in upright position to prevent damage to internal components.

Energy Saving Tips

Maximize efficiency and reduce energy costs.

• Use only in occupied rooms; close doors to unheated areas
• Set thermostat to lowest comfortable temperature (68°F recommended)
• Use Low setting for maintenance heating, High for quick warm-up
• Ensure rooms are well-insulated to retain heat
• Use in conjunction with central heating for zone heating

Regulatory Information

UL Listed: Meets UL Standard 1278 for portable electric heaters. FCC Part 15: Class B digital device compliance. Copyright © 2025 Kenwood Appliances; all rights reserved. For support, visit www.kenwoodappliances.com or contact 1-800-555-HEAT (4328).

Troubleshooting

Reset: Unplug for 10 minutes, then restart if unit malfunctions.

Service: 1-800-555-HEAT (4328); www.kenwoodappliances.com