Kenwood RC DV330 Manual

The Kenwood RC DV330 is a versatile remote control unit designed for Kenwood audio/video systems, featuring universal compatibility, programmable functions, LCD display, backlit buttons, macro programming capabilities, and learning function for controlling multiple devices. Below are key sections for features, setup, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. Programming Instructions 4. Specifications 5. Controls and Functions 6. Device Connection 7. Macro Programming 8. Learning Function 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD display, backlit buttons, device selection keys, numeric keypad, navigation controls, function buttons.

Feature	Description
LCD Display	Shows device status and programming information
Backlit Buttons	Illuminated keys for low-light operation
Device Selection	TV, DVD, AUDIO, CABLE, AUX controls
Numeric Keypad	Direct channel/input selection
Navigation Controls	Arrow keys and OK/Enter button
Macro Programming	Multi-command sequence storage
Learning Function	Learn commands from other remotes
Battery Compartment	Holds 2 AA batteries
Reset Button	Factory reset function
Power Button	Turns controlled devices on/off

Installation and Setup

Unpack and inspect contents. Insert batteries and program for your devices.

Battery installation: Open battery compartment, insert 2 AA batteries with correct polarity.
Device setup: Press device button (TV, DVD, etc.) and enter manufacturer code.
Test operation: Point remote at device and test basic functions.
Programming: Use learning function for unsupported devices.

WARNING! Use correct battery type; do not mix old and new batteries. Keep away from moisture.

Programming Instructions

Program remote for your specific devices using manufacturer codes.

Select device: Press and hold device button until LED blinks twice.
Enter code: Use numeric keypad to enter 3-5 digit manufacturer code.
Confirm: Point remote at device and test power button.
Learning mode: For unsupported devices, use learning function to copy commands.

CAUTION! Keep original remote available for learning function. Ensure fresh batteries.

Specifications

Power Source: 2 x AA batteries (3V DC)
Battery Life: Approximately 6 months with normal use
Operating Range: Up to 8 meters (26 feet)
Infrared Frequency: 38kHz carrier frequency
Memory Capacity: Stores up to 50 learned commands
Macro Storage: 5 programmable macros
Display: LCD with backlight
Dimensions: 220mm x 55mm x 35mm
Weight: 150g (with batteries)

Controls and Functions

Access functions via device selection buttons and navigation controls.

Device Buttons: TV, DVD, AUDIO, CABLE, AUX for multi-device control.

Navigation: Arrow keys for menu navigation, OK/Enter for selection. Volume: VOL+/- for audio control. Channel: CH+/- for TV/Cable control. Transport: PLAY, STOP, PAUSE, FF, REW for media control. Special Functions: MENU, GUIDE, INFO, EXIT for advanced control. Macro: MACRO button for sequence programming.

Device Connection

Control multiple devices by programming each device section.

Turn on all devices to be controlled.
Program each device using manufacturer codes.
Test all functions for each programmed device.
Use learning function for any unsupported commands.

Tip: Keep manufacturer code list handy for quick programming.

Macro Programming

Create command sequences for complex operations with single button press.

Press and hold MACRO button until LED flashes.
Press macro number (1-5) to assign sequence.
Enter commands in desired sequence with 1-second pauses.
Press MACRO button again to save sequence.
Test macro by pressing assigned macro button.

WARNING! Do not interrupt power during macro programming. Maximum 20 commands per macro.

Learning Function

Learn commands from original remote controls for unsupported devices.

Press LEARN button until LED illuminates.
Press button on Kenwood remote to be programmed.
Point original remote at Kenwood remote's sensor (3-5 cm distance).
Press corresponding button on original remote.
LED flashes twice to confirm learning success.

Note: Some proprietary functions may not be learnable.

Care & Maintenance

Remove batteries before extended storage. Clean with dry cloth only.

CAUTION! Do not use chemicals or abrasive cleaners. Avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2006 Kenwood Corporation; all rights reserved. For support, visit www.kenwood.com or contact customer service at 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries/obstacles	Replace batteries; ensure clear path to device sensor.
Limited range	Weak batteries/obstacles	Install fresh batteries; remove obstacles between remote and device.
Learning function fails	Distance/angle issues	Ensure 3-5 cm distance; point remotes directly at each other.
Macro not executing	Timing issues	Reprogram macro with proper timing between commands.
Buttons unresponsive	Battery contact issues	Clean battery contacts; ensure proper battery installation.

Reset: Remove batteries, press all buttons for 30 seconds, reinstall batteries.

Service: 1-800-536-9663; www.kenwood.com