Kenwood Remote Control Manual

The Kenwood Remote Control is a universal remote designed to operate various Kenwood audio and video components, featuring programmable functions, learning capabilities, and compatibility with multiple Kenwood devices. Below are key sections for features, setup, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. Programming the Remote 4. Specifications 5. Controls and Functions 6. Device Compatibility 7. Operation Modes 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Infrared transmitter, LCD display, programmable buttons, learning function, device selection keys, battery compartment.

Feature	Description
Infrared transmitter	For wireless control of compatible devices
LCD display	Shows current mode and status information
Programmable buttons	Customizable functions for different devices
Learning function	Can learn commands from other remotes
Device selection keys	Quick switching between audio/video components
Battery compartment	Holds 2 AA batteries for power
POWER	Turns connected devices on/off
VOLUME	Controls audio level
MUTE	Instantly mutes audio
MENU	Accesses device settings and options

Installation and Setup

Unpack and inspect contents. Insert batteries properly.

Insert batteries: Open battery compartment, insert 2 AA batteries with correct polarity.
Test remote: Point at device and press POWER to verify operation.
Program devices: Follow programming instructions for each component.
Set up learning function: Program custom commands if needed.

WARNING! Use only recommended batteries; do not mix old and new batteries.

Programming the Remote

Program remote to control your Kenwood devices automatically or manually.

Auto-search: Hold DEVICE and CODE SEARCH until indicator blinks twice.
Enter code: Use numeric keypad to enter manufacturer code from code list.
Test functions: Verify POWER, VOLUME, and other basic controls work.
Store code: Press DEVICE to lock in programming.

CAUTION! Keep original remotes for reference during programming.

Specifications

Power Source: 2 x AA batteries.
Operating Range: Up to 8 meters (26 feet).
Angle of Operation: ±30 degrees.
Compatibility: Kenwood receivers, CD players, cassette decks, tuners.
Learning Capacity: Up to 20 commands.
Display: Backlit LCD (on select models).
Weight: Approximately 150g with batteries.
Operating Temp: 0°C to 40°C (32°F to 104°F).

Controls and Functions

Access different device modes via DEVICE buttons. Main Controls: POWER, VOLUME, MUTE, MENU, NAVIGATION arrows.

Device Buttons: AMP, CD, TUNER, TAPE, AUX, DVD.

Basic Functions: Volume control, power on/off, input selection, menu navigation. Advanced: Macro programming, learning function, backlight (on supported models). Setup: Code programming, reset function, device memory.

Device Compatibility

Compatible with Kenwood audio/video components: Receivers, CD players, tuners, cassette decks, DVD players.

Select device type: Press corresponding DEVICE button (AMP, CD, etc.).
Enter code: Use code list for specific model programming.
Test operation: Verify all functions work properly.

Tip: Refer to Kenwood website for latest code updates.

Operation Modes

Supports multiple device control with mode switching.

Select mode: Press DEVICE button for desired component.
Control device: Use appropriate function buttons for selected device.
Switch modes: Press different DEVICE button to control another component.
Master volume: VOLUME controls current audio device.
Power control: POWER turns selected device on/off.
Input selection: Use INPUT/SOURCE for device inputs.
Navigation: Arrow keys for menu control.
Macro functions: Program sequence of commands (on advanced models).

WARNING! Do not expose to extreme temperatures or moisture.

Advanced Features

Learning Function: Program custom commands from other remotes. Macro Programming: Store sequence of commands for one-button operation.

Care & Maintenance

Remove batteries if not used for extended periods. Clean with dry cloth only; no liquids or chemicals.

CAUTION! Do not drop or expose to water; keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Dead batteries/obstacles	Replace batteries; point directly at device; check IR sensor.
Some buttons not working	Programming error	Reprogram remote with correct code; test all functions.
Short operating range	Weak batteries/obstacles	Replace batteries; remove obstacles; clean IR window.
Learning function fails	Source remote distance	Place remotes 2-3 cm apart; ensure source remote works.
Macro not executing	Programming sequence	Reprogram macro; ensure proper timing between commands.

Reset: Remove batteries, press all buttons, reinsert batteries.

Service: Contact authorized Kenwood service center; www.kenwood.com