Kenwood RXD M33 User Manual

The Kenwood RXD M33 is a high-performance digital audio receiver with advanced connectivity options, multi-room audio capabilities, built-in streaming services, and versatile input/output configurations. Featuring Bluetooth connectivity, Wi-Fi streaming, AM/FM tuner, multiple digital and analog inputs, and robust power output. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network and Streaming 8. Multi-Room Audio 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital audio processor, Remote Control, Multiple input/output ports, Network connectivity, Bluetooth antenna, Power supply unit.

Feature	Description
Bluetooth connectivity	For wireless audio streaming from mobile devices
Wi-Fi network	For internet radio and streaming services
AM/FM tuner	For radio broadcasting reception
Optical/Coaxial inputs	For digital audio sources
Analog RCA inputs	For traditional audio components
Speaker terminals	For connecting main and zone 2 speakers
POWER	Turns receiver on/off
INPUT SELECT	Cycles through audio sources
VOLUME	Adjusts audio output level
MENU	Accesses system settings

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use speaker wire to connect main and optional zone 2 speakers.
Connect audio sources: Use appropriate cables for CD player, turntable, TV, etc.
Connect network: Use Ethernet cable or configure Wi-Fi for network connectivity.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block air vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen or app-guided setup.

Network setup: Connect via Ethernet or configure Wi-Fi settings.
Speaker configuration: Run auto-setup or manually configure speaker settings.
Source assignment: Assign inputs to connected devices.
Streaming services: Log in to preferred music services.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 100W per channel (8 ohms)
Frequency Response: 20Hz - 20kHz
Bluetooth: Version 4.2 with A2DP support
Wi-Fi: 802.11 a/b/g/n/ac
Inputs: 4 analog, 2 optical, 1 coaxial, phono
Outputs: Speaker terminals, subwoofer, zone 2
Streaming: Spotify Connect, AirPlay 2, Chromecast built-in
Power Requirements: 120V AC, 60Hz
Dimensions: 17.1" W × 5.6" H × 13.3" D

Controls and Settings

Access settings via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, MENU.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, PRESET, TUNER, MENU, NAVIGATION buttons.

Audio: Bass, treble, balance, loudness, tone defeat. Network: Wi-Fi setup, service configuration. System: Speaker setup, input assignment, firmware updates. Multi-room: Zone 2 configuration, sync settings.

Connecting Devices

Audio Sources: Analog RCA, optical, coaxial, phono. Network: Ethernet or Wi-Fi. Speakers: Main and zone 2 outputs.

Turn off receiver before connecting devices.
Match cable types to appropriate inputs.
Assign inputs in system menu for easy selection.
Test each connection after setup.

Tip: Use high-quality cables for best audio performance.

Network and Streaming

Supports multiple streaming protocols and services.

Network connection: Establish via Ethernet or Wi-Fi.
Service setup: Access streaming services menu to log in.
Internet radio: Browse and save favorite stations.
Bluetooth pairing: Put in pairing mode and connect mobile device.
Multi-room sync: Configure for synchronized audio playback.

WARNING! Ensure stable internet connection for streaming services.

Multi-Room Audio

Zone 2 functionality for whole-home audio distribution.

Connect zone 2 speakers to dedicated terminals.
Enable zone 2 in system settings.
Select source for zone 2 independently from main zone.
Adjust volume separately for each zone.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners. Ensure proper ventilation during operation.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet; ensure power switch on.
No sound	Speaker connections/mute	Verify speaker wires; check mute function; confirm input selection.
Network issues	Connection/credentials	Check network cables; verify Wi-Fi password; restart router.
Bluetooth not pairing	Distance/interference	Ensure device within range; remove obstacles; restart pairing process.
Distorted audio	Settings/speakers	Check speaker impedance; adjust volume levels; inspect cables.

Reset: Menu > System > Factory Reset if persistent issues.

Service: 1-800-536-9663; www.kenwood.com/support