Kenwood Stack System Manual

The Kenwood Stack System is a high-performance audio system featuring multiple components including receiver, CD player, cassette deck, and speakers. This system delivers exceptional sound quality with advanced audio processing, multiple input options, remote control functionality, and customizable sound profiles. Below are key sections covering features, installation, operation, and maintenance.

System Overview

Key components: Main receiver unit, CD player module, Cassette deck, Remote control, Speaker terminals, Audio input/output jacks.

Installation Guide

Unpack all components carefully and verify contents. Choose stable, well-ventilated location.

1. Connect speakers: Match polarity (+/-) to speaker terminals.
2. Stack components: Ensure proper ventilation between units.
3. Connect audio sources: Use appropriate cables for CD, tape, aux inputs.
4. Connect antenna: For AM/FM radio reception.
5. Plug into AC power outlet.

WARNING! Ensure adequate ventilation to prevent overheating. Do not block ventilation slots.

Initial Setup

Power on system and configure basic settings.

1. Select input source: Choose CD, Tape, Tuner, or Aux.
2. Tune radio: Auto-scan or manual tuning for FM/AM stations.
3. Set clock: Use front panel or remote control.
4. Adjust tone: Set bass, treble, and balance to preference.
5. Test all functions: Verify CD playback, tape operation, radio reception.

CAUTION! Handle components carefully during setup to avoid damage.

Technical Specifications

• Power Output: 100W per channel (RMS)
• Frequency Response: 20Hz - 20kHz
• Total Harmonic Distortion: < 0.1%
• Signal-to-Noise Ratio: > 85dB
• Input Sensitivity: 150mV
• Tuner Section: AM/FM with 30 station presets
• CD Player: Compatible with CD, CD-R, CD-RW
• Cassette Deck: Dolby B/C noise reduction
• Power Requirements: AC 120V, 60Hz
• Dimensions: 430mm (W) x 150mm (H) x 350mm (D)

Controls and Functions

Front Panel: POWER, INPUT SELECTOR, VOLUME, BASS, TREBLE, BALANCE, TUNING.

Remote Control: POWER, NUMERIC, VOLUME, MUTE, INPUT SELECT, PLAY, STOP, PAUSE, TUNING, PRESETS.

Audio Controls: Bass (-10 to +10dB), Treble (-10 to +10dB), Balance (L/R adjustment). Tuner: Manual/Auto tuning, Station presets (1-30). CD: Play, Pause, Stop, Skip, Repeat. Cassette: Play, Record, Stop, Rewind, Fast Forward.

Audio Connections

Speaker outputs, Audio inputs (CD, Tape, Aux, Phono), Tape monitor loop.

1. Turn off power before making connections.
2. Use quality cables for best audio performance.
3. Match input sources to correct jacks.
4. Ensure secure connections to prevent noise.

Tip: Use shielded cables for phono inputs to reduce hum.

CD Player Operation

Supports standard audio CDs and recordable media.

1. Load disc: Press OPEN/CLOSE, place CD in tray.
2. Play: Press PLAY; use SKIP for track selection.
3. Programming: Use PROGRAM for custom play order.
4. Repeat: REPEAT for track or disc repetition.
5. Random: RANDOM for shuffle playback.
6. Display: Shows track number, elapsed time, remaining time.

WARNING! Handle CDs by edges only. Keep discs clean and free from scratches.

Cassette Deck Features

Record and playback with Dolby noise reduction.

1. Recording: Use blank tape, set recording level.
2. Playback: Auto-reverse function available.
3. Dolby NR: Reduces tape hiss (B/C selection).
4. Timer: Record/play with timer function.
5. Head cleaning: Regular maintenance required.

Maintenance & Care

Unplug before cleaning. Use soft, dry cloth for exterior. Clean CD lens with approved cleaner.

CAUTION! Do not use solvents or abrasive cleaners. Keep away from moisture and extreme temperatures.

Warranty Information

Limited warranty: 2 years parts and labor. Registration required within 30 days of purchase. Service centers available nationwide. For warranty claims, contact authorized service provider with proof of purchase.

Troubleshooting Guide

Reset: Disconnect power for 30 seconds to reset system.

Service: Contact authorized Kenwood service center for repairs.