Kenwood Stereo System Manuals

The Kenwood Stereo System is a high-performance audio system featuring multiple connectivity options, advanced sound processing, CD playback, radio tuner, and various audio inputs. With support for Bluetooth connectivity, USB playback, AM/FM radio, and multiple audio sources, this system delivers exceptional sound quality for home entertainment. Below are key sections for features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Sound Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main receiver unit, Remote Control, Speaker terminals, Audio inputs, USB port, Bluetooth connectivity, CD player, Radio tuner.

Feature	Description
Bluetooth connectivity	For wireless audio streaming from compatible devices
USB port	For playing audio files from USB storage devices
CD player	Plays audio CDs and CD-R/RW discs
AM/FM tuner	Radio reception with preset stations
Audio inputs	RCA and auxiliary inputs for external devices
Speaker terminals	For connecting left and right speakers
Power button	Turns system on/off
Volume control	Adjusts audio output level
Source selection	Switches between audio inputs
Bass/Treble controls	Adjusts sound equalization

Installation

Unpack and inspect all components. Place on stable, level surface.

Connect speakers: Match positive/negative terminals to speaker wires.
Connect power: Plug AC power cord into wall outlet.
Connect audio sources: Use RCA cables for external devices.
Position speakers: Place at ear level for optimal sound quality.

WARNING! Ensure proper ventilation around unit; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on system; follow initial setup procedure.

Speaker setup: Ensure proper left/right channel connection.
Radio tuning: Auto-scan and save favorite stations.
Bluetooth pairing: Put in pairing mode and connect mobile device.
Sound calibration: Adjust bass, treble, and balance to preference.

CAUTION! Keep away from moisture and heat sources. Use stable power supply.

Specifications

Power Output: 50W per channel (RMS)
Frequency Response: 20Hz - 20kHz
Signal-to-Noise Ratio: >85dB
Inputs: RCA, Auxiliary, USB, Bluetooth
Outputs: Speaker terminals, Headphone jack
Supported Formats: CD-DA, MP3, WMA
Power Requirements: 120V AC, 60Hz
Dimensions: Standard component size

Controls and Settings

Front panel controls: POWER, SOURCE, VOLUME, BASS, TREBLE. Remote control: All functions plus numeric keys for presets.

Menu Options: Sound settings (Bass, Treble, Balance), Radio presets, Bluetooth settings, System reset. Display shows current source, volume level, track information, and radio frequency.

Connecting Devices

Multiple input options for various audio sources.

Bluetooth: Enable pairing mode, select from device list.
USB: Insert USB drive with supported audio files.
Auxiliary: Connect 3.5mm cable from mobile devices.
RCA inputs: Connect CD players, turntables, other audio sources.

Tip: Use high-quality cables for best audio performance.

Playing Media

Supports multiple media types and playback modes.

CD playback: Insert disc, press PLAY; use SKIP for tracks.
USB playback: Navigate folders using remote control.
Radio: Tune manually or use auto-scan for stations.
Bluetooth: Control playback from connected device.
Repeat/Shuffle: Available for CD and USB playback.

WARNING! Handle CDs carefully; avoid scratching surfaces. Eject properly before power off.

Sound Features

Advanced audio processing for optimal listening experience.

Equalizer settings: Customizable presets (Rock, Jazz, Classical, Flat). Sound modes: Stereo, Mono, Enhanced bass. Loudness compensation: Automatic volume adjustment.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean CD lens with approved cleaner only.

CAUTION! Do not use chemical cleaners. Avoid liquid contact with controls and vents.

Regulatory Information

FCC compliant: Class B digital device. CE marked for European compliance. Manufactured under ISO 9001 quality standards. For support, visit www.kenwood.com or contact customer service at 1-800-KENWOOD.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Volume/mute settings	Check volume level; ensure mute is off.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; reduce distance from device.
CD not playing	Disc format/damage	Use supported disc format; check for scratches.
Poor radio reception	Antenna/position	Extend antenna; reposition for better signal.

Reset: Hold POWER and SOURCE for 10 seconds to factory reset.

Service: 1-800-KENWOOD; www.kenwood.com