Kenwood TK 2170 Manual

The Kenwood TK 2170 is a professional VHF two-way portable radio designed for commercial and industrial use. It features robust construction, multiple channel capacity, programmable functions, and reliable communication performance. Below are key sections covering safety, features, installation, operation, programming, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Programming the Radio 7. Operation 8. Battery Information 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Rugged chassis, programmable buttons, LCD display, antenna, battery pack, and accessory connections.

Feature	Description
Frequency Range	VHF 136-174 MHz
Channels	Up to 128 programmable channels
Power Output	5W (High), 1W (Low)
Battery	Ni-Cd or Ni-MH battery pack
Display	LCD with backlight
Programming	PC programmable via KPG-22D software
Scanning	Programmable scan functions
CTCSS/DCS	Tone squelch and digital coded squelch
Dimensions	58W x 130H x 37.5D mm
Weight	Approx. 450g with battery

Installation

Unpack and inspect contents. Install battery and antenna.

Battery installation: Align battery contacts, slide battery onto radio until it clicks.
Antenna installation: Screw antenna clockwise into antenna connector.
Belt clip: Attach to back of radio if required.
Charging: Place radio in charger; ensure charging indicator lights.

WARNING! Do not transmit without antenna attached. Ensure battery is properly installed.

First-Time Setup

Power on radio; verify basic operation.

Power on: Turn volume knob clockwise.
Channel selection: Use channel selector knob.
Volume adjustment: Rotate volume knob.
Squelch adjustment: Use squelch control if available.
Test transmission: Press PTT button to transmit.

CAUTION! Ensure proper programming before use in licensed frequencies.

Specifications

Frequency Range: VHF 136-174 MHz
Channel Capacity: 128 channels
Power Supply: 7.2V DC (battery pack)
Current Drain: 1.5A max (transmit)
Modulation: 16KΦF3E (FM)
Antenna Impedance: 50Ω
Operating Temperature: -30°C to +60°C
Battery Life: Approx. 10 hours (5-5-90 duty cycle)
Charger: Desktop or multi-unit charger available

Controls and Settings

Front Panel: Power/Volume knob, Channel selector, PTT button, Programmable buttons.

Display: Shows channel number, status icons, and programming information.

Programmable Functions: Monitor, Scan, High/Low power, Tone encode/decode, Time-out timer, Busy channel lockout. Audio: Volume control, built-in speaker, external speaker/mic jack. Display: Backlight with adjustable timeout.

Programming the Radio

Requires KPG-22D programming software and cable.

Install KPG-22D software on PC.
Connect programming cable to radio and PC.
Read current data from radio.
Program frequencies, tones, and functions.
Write data to radio.
Verify programming.

Tip: Backup current programming before making changes.

Operation

Basic radio operation procedures.

Power on: Turn volume knob.
Select channel: Use channel selector.
Adjust volume: Rotate volume knob.
Transmit: Press and hold PTT button; speak clearly.
Receive: Release PTT button.
Scan: Press scan button if programmed.
Monitor: Press monitor to hear weak signals.

WARNING! Transmit only on authorized frequencies with proper license.

Battery Information

Battery types: Standard Ni-Cd, High-capacity Ni-MH.

Charging: Use approved Kenwood charger. Initial charge: 14-16 hours. Normal charge: 8-10 hours. Battery life: 300-500 charge cycles.

CAUTION! Use only Kenwood-approved batteries and chargers.

Care & Maintenance

Clean with dry cloth only. Avoid solvents and liquids.

Regular maintenance: Check antenna connection, battery contacts, case for damage.

CAUTION! Do not disassemble radio; refer to authorized service center.

Regulatory Information

FCC Part 90 certified for land mobile radio service. Complies with relevant FCC rules. Manufacturer: Kenwood Corporation. For support, contact authorized Kenwood dealer or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged/defective	Charge battery; replace if necessary.
No transmission	PTT button/antenna	Check PTT function; ensure antenna attached.
Poor reception	Antenna/squelch setting	Check antenna connection; adjust squelch.
No audio	Volume setting/speaker	Increase volume; check speaker.
Programming failure	Cable/software	Check cable connection; verify software version.

Reset: Requires programming software to reset to factory defaults.

Service: Contact authorized Kenwood service center.