Kenwood TK 3130 Manual

The Kenwood TK 3130 is a professional two-way portable radio designed for business and industrial use. This VHF/UHF radio features robust construction, multiple channel capacity, programmable functions, emergency alert capabilities, and long battery life. Below are key sections covering safety, features, operation, programming, maintenance, and troubleshooting.

Features at a Glance

Key components: Durable housing, LCD display, programmable buttons, antenna, battery pack, charging contacts.

Installation and Setup

Unpack and inspect contents. Install battery and antenna before first use.

1. Battery installation: Align battery contacts, slide battery upward until it clicks.
2. Antenna installation: Screw antenna clockwise onto antenna connector.
3. Battery charging: Place radio in charger, ensure charging indicator lights.
4. Power on: Rotate volume knob clockwise to turn on radio.

WARNING! Use only Kenwood approved batteries and chargers. Do not disassemble radio.

First-Time Operation

Power on radio; verify basic functions.

1. Volume control: Rotate knob to adjust audio level.
2. Channel selection: Use channel selector knob or programmed buttons.
3. Transmit: Press and hold PTT button, speak clearly into microphone.
4. Receive: Release PTT button to listen.
5. Display: Check signal strength and battery indicators.

CAUTION! Ensure proper antenna is installed before transmitting.

Specifications

• Frequency Range: VHF 136-174 MHz / UHF 400-470 MHz
• Channels: 128 max programmable
• Power Output: 5W VHF / 4W UHF (high power)
• Battery Life: Approx. 10 hours (5-5-90 duty cycle)
• Operating Temp: -30°C to +60°C
• Weight: 380g (with standard battery)
• Modulation: 16KΦF3E / 11KΦF3E
• Antenna Impedance: 50Ω
• Charging Time: Approx. 3 hours (standard charger)

Controls and Functions

Front Panel: Volume knob, channel selector, PTT button, programmable buttons, LCD display.

Display Indicators: Channel number, battery level, transmit indicator, busy channel, scan status.

Programmable Functions: Monitor, scan, power level selection, timeout timer, busy channel lockout, DTMF signaling, emergency alert, voice scramble (optional).

Programming Instructions

Requires KPG-46D programming software and programming cable.

1. Install KPG-46D software on Windows PC.
2. Connect programming cable to radio and PC.
3. Read current data from radio.
4. Program frequencies, tones, and functions as required.
5. Write data to radio and verify operation.

Tip: Backup current programming before making changes.

Battery and Charging

Standard battery: Li-ion 1300mAh. Charging time: approx. 3 hours.

1. Place radio in charger with contacts aligned.
2. Charger LED shows red while charging.
3. LED turns green when charging complete.
4. For best battery life, charge at room temperature.
5. Battery conditioning: Fully discharge monthly for optimal performance.

WARNING! Use only Kenwood approved chargers. Do not charge damaged batteries.

Advanced Features

Scan Function: Programmable scan lists with priority channels. Emergency Alert: Programmable emergency transmission. DTMF Signaling: Selective calling and remote control. Voice Scramble: Optional voice inversion (requires programming).

Care & Maintenance

Clean with soft, dry cloth. Avoid solvents and chemicals. Regular inspection of antenna, battery contacts, and case integrity.

CAUTION! Do not immerse in water. Keep away from extreme temperatures.

Regulatory Information

FCC Part 90 certified for land mobile radio service. Complies with relevant industry standards. Manufactured by Kenwood Corporation. For technical support and service, contact authorized Kenwood dealers or visit www.kenwood.com.

Troubleshooting

Reset: Requires programming software reset.

Service: Contact authorized Kenwood service center for repairs.