Kenwood TK 3170 Manual

The Kenwood TK 3170 is a professional VHF two-way portable radio designed for commercial and industrial use. It features robust construction, clear audio quality, multiple channel capacity, programmable functions, and reliable communication performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Durable housing, LCD display, programmable buttons, antenna, battery pack, charging contacts.

Feature	Description
Frequency Range	VHF 136-174 MHz
Channels	Up to 128 programmable channels
Power Output	5W (High), 1W (Low)
Battery	Li-ion battery pack
Display	Backlit LCD with channel info
Programmable Buttons	Multiple function keys
Scan Function	Programmable scan lists
VOX	Voice operated transmission
IP Rating	IP54 dust and water resistant
Dimensions	Compact and portable design

Installation

Unpack and inspect contents. Install battery and antenna.

1. Install battery: Align battery with contacts, slide until it clicks into place.
2. Attach antenna: Screw antenna clockwise onto antenna connector.
3. Charge battery: Place radio in charger until fully charged.
4. Install accessories: Attach belt clip or other accessories as needed.

WARNING! Use only Kenwood-approved batteries and chargers. Do not use damaged batteries.

First-Time Setup

Power on radio; configure basic settings.

1. Turn on radio: Rotate volume knob clockwise.
2. Select channel: Use channel selector knob.
3. Adjust volume: Rotate volume knob to desired level.
4. Set squelch: Use squelch control to eliminate background noise.
5. Program channels: Use programming software to set frequencies.

CAUTION! Radio must be programmed before use. Contact authorized dealer for programming.

Specifications

• Frequency Range: VHF 136-174 MHz
• Channels: 128 maximum
• Power Output: 5W (High), 1W (Low)
• Battery Life: Up to 12 hours (typical use)
• Operating Temp: -30°C to +60°C
• Dimensions: Compact portable design
• Weight: Lightweight with battery
• Audio Output: Clear, powerful speaker
• Data Capability: Optional data functions
• Warranty: Standard manufacturer warranty

Controls and Settings

Front Panel: Power/Volume knob, Channel selector, PTT button, Programmable buttons.

Display: Shows channel number, battery status, transmit indicator, scan status.

Basic Functions: Power on/off, Volume control, Channel selection, PTT operation. Advanced Functions: Scan, Monitor, VOX, Power level selection, Time-out timer. Programming: Requires KPG-89D programming software and cable.

Programming the Radio

Requires KPG-89D programming software and programming cable.

1. Install programming software on PC.
2. Connect radio to PC using programming cable.
3. Read current configuration from radio.
4. Program frequencies, tones, and functions.
5. Write configuration back to radio.
6. Verify programming by testing all channels.

Tip: Backup configuration files for future use.

Operation

Basic radio operation procedures.

1. Power on: Rotate volume knob clockwise.
2. Select channel: Turn channel selector knob.
3. Transmit: Press and hold PTT button, speak clearly.
4. Receive: Release PTT button to listen.
5. Adjust volume: Rotate volume knob as needed.
6. Scan: Press scan button to monitor multiple channels.
7. Monitor: Press monitor to hear weak signals.

WARNING! Only transmit on authorized frequencies with proper license.

Battery and Charging

Battery maintenance and charging procedures.

1. Initial charge: Charge battery fully before first use.
2. Regular charging: Charge when battery indicator shows low.
3. Battery life: Typical 10-12 hours depending on usage.
4. Storage: Store in cool, dry place when not in use.
5. Replacement: Replace battery when performance decreases.

CAUTION! Use only Kenwood-approved chargers and batteries.

Care & Maintenance

Regular cleaning and maintenance procedures.

1. Cleaning: Use soft, dry cloth to clean exterior.
2. Antenna: Check for damage regularly.
3. Battery contacts: Keep clean and free of corrosion.
4. Storage: Store in protective case when not in use.
5. Inspection: Regular visual inspection for damage.

CAUTION! Do not use chemicals or solvents for cleaning.

Regulatory Information

FCC Part 90: Certified for land mobile radio service. Compliance with relevant telecommunications regulations. Manufacturer: Kenwood Corporation. For technical support and service, contact authorized Kenwood dealers. This device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery dead/not installed	Charge battery; ensure proper installation.
No transmission	PTT button/antenna	Check PTT function; ensure antenna attached.
Poor reception	Antenna/location	Check antenna connection; move to better location.
No audio	Volume/speaker	Adjust volume; check speaker function.
Battery drains quickly	Old battery/usage	Replace battery; reduce transmit time.
Programming issues	Software/cable	Check cable connection; verify software settings.

Reset: May require reprogramming by authorized dealer.

Service: Contact authorized Kenwood service center for repairs.