Kenwood TK 3200 Manual

The Kenwood TK 3200 is a professional VHF FM two-way portable radio designed for commercial and industrial applications. Featuring robust construction, multiple channel capacity, programmable functions, and reliable communication performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Durable housing, LCD display, programmable buttons, antenna, battery pack, charger connection.

Feature	Description
Frequency Range	VHF 136-174 MHz
Channels	Up to 128 programmable channels
Power Output	5W (High), 1W (Low)
Battery	Ni-Cd or Ni-MH battery pack
Display	LCD with backlight
Programming	PC programmable via KPG-46D software
Scan Function	Programmable scan with priority
CTCSS/DCS	Tone squelch and digital coded squelch
Dimensions	58W x 130H x 37D mm (with standard battery)
Weight	Approx. 450g with standard battery

Installation

Unpack and inspect contents. Install battery and antenna.

1. Battery installation: Align battery contacts, slide battery onto radio until it clicks.
2. Antenna installation: Screw antenna clockwise onto antenna connector.
3. Belt clip: Attach belt clip to rear of radio if required.
4. Charging: Place radio in charger, ensure charging indicator lights.

WARNING! Use only Kenwood approved batteries and chargers. Do not short-circuit battery terminals.

First-Time Setup

Power on radio; configure basic settings.

1. Power on: Rotate volume knob clockwise to turn on.
2. Channel selection: Use channel selector knob to choose desired channel.
3. Volume adjustment: Rotate volume knob for desired audio level.
4. Squelch adjustment: Press and hold MONI button while adjusting squelch.
5. Programming: Connect to PC with KPG-46D programming cable for advanced setup.

CAUTION! Program radio only in safe, non-hazardous environments.

Specifications

• Frequency Range: VHF 136-174 MHz
• Channel Capacity: 128 channels
• Power Supply: 7.2V DC (battery pack)
• Current Drain: 1.3A (5W TX), 0.8A (1W TX), 70mA (RX)
• Modulation: 16K0F3E (FM)
• Antenna Impedance: 50 ohms
• Operating Temperature: -30°C to +60°C
• Battery Life: Approx. 10 hours (5-5-90 duty cycle)
• Water Resistance: IP54 standard

Controls and Settings

Front Panel: Volume knob, Channel selector, PTT button, MONI button, programmable buttons.

Display Indicators: Channel number, battery level, transmit indicator, busy channel, scan status.

Programming: Channel frequencies, CTCSS/DCS codes, power levels, scan lists, time-out timer, busy channel lockout. Buttons: Programmable for functions like scan, power level, monitor, emergency call.

Connecting Devices

Accessories: Speaker microphone, headset, external antenna, programming cable.

1. Turn off radio before connecting accessories.
2. Speaker microphone: Connect to accessory jack on top of radio.
3. Headset: Use appropriate adapter for accessory jack.
4. Programming cable: Connect to PC and radio for programming.
5. External antenna: Use appropriate cable and connector.

Tip: Ensure all connections are secure and compatible.

Operation Modes

Basic operation modes and functions.

1. Transmit: Press and hold PTT button, speak clearly into microphone.
2. Receive: Release PTT button to listen; adjust volume as needed.
3. Channel selection: Rotate channel knob to desired channel.
4. Scan operation: Press programmed scan button to start/stop scanning.
5. Monitor function: Press MONI button to open squelch and check for weak signals.
6. Power level: Use programmed button to switch between high/low power.
7. Emergency call: Press emergency button if programmed.

WARNING! Transmit only when necessary and authorized.

Programming Features

Advanced programming via KPG-46D software.

Channel programming: Frequencies, transmit/receive CTCSS/DCS, power levels. Scan programming: Scan lists, priority channels, resume conditions. System features: Time-out timer, busy channel lockout, battery save, auto power off. Button programming: Assign functions to programmable buttons.

Care & Maintenance

Regular maintenance ensures optimal performance.

Cleaning: Use soft, dry cloth; avoid solvents and chemicals. Battery care: Charge battery fully before first use; avoid complete discharge. Storage: Store in cool, dry place; remove battery if storing long-term. Inspection: Regularly check antenna, battery contacts, and case for damage.

CAUTION! Do not disassemble radio; refer service to qualified technicians.

Regulatory Information

FCC Part 90: Certified for land mobile radio service. Compliance: Meets applicable FCC rules for commercial radio equipment. Manufacturer: Kenwood Corporation. For technical support and service, contact authorized Kenwood service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged/defective	Charge battery; replace if necessary.
No transmission	PTT button/antenna	Check PTT function; ensure antenna properly connected.
Poor reception	Antenna/settings	Check antenna connection; adjust squelch setting.
Battery drains quickly	Battery age/usage	Replace battery; check for excessive transmission.
No audio	Volume/speaker	Adjust volume; check speaker and connections.
Programming failure	Cable/software	Check programming cable; verify software settings.

Reset: Use programming software to reset to factory defaults if required.

Service: Contact authorized Kenwood service center for repairs.