Kenwood TK 3207 Manual

The Kenwood TK 3207 is a professional UHF two-way portable radio designed for business and commercial use. It features robust construction, clear audio quality, multiple channel capacity, programmable functions, and reliable performance in demanding environments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Programming the Radio 7. Operation 8. Battery Information 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: UHF transceiver, LCD display, programmable buttons, antenna, battery pack, belt clip.

Feature	Description
Frequency Range	UHF 400-470MHz
Channels	Up to 128 programmable channels
Output Power	5W (high), 1W (low)
LCD Display	Backlit display with channel info
Programmable Buttons	Customizable function keys
Battery	Li-ion battery pack
Antenna	Removable UHF antenna
Scan Function	Programmable scan modes
VOX Capability	Voice operated transmission
IP Rating	IP54 dust and water resistant

Installation

Unpack and inspect contents. Install battery and antenna.

Install battery: Align battery with contacts, slide until it clicks into place.
Install antenna: Screw antenna clockwise into antenna connector.
Attach belt clip: Secure belt clip to back of radio if needed.
Charge battery: Connect charger to radio or battery for initial charge.

WARNING! Use only Kenwood approved batteries and accessories. Do not use damaged equipment.

First-Time Setup

Power on radio; configure basic settings.

Turn on: Rotate volume knob clockwise to power on.
Select channel: Use channel selector knob to choose desired channel.
Adjust volume: Rotate volume knob to comfortable listening level.
Set squelch: Adjust squelch control to eliminate background noise.
Program channels: Use programming software to set frequencies and functions.

CAUTION! Radio must be programmed by qualified personnel for proper operation.

Specifications

Frequency Range: UHF 400-470MHz
Channels: 128 maximum
Output Power: 5W (high), 1W (low)
Battery Life: Approx. 10 hours (typical use)
Dimensions: 58W x 130H x 37D mm (with standard battery)
Weight: Approx. 350g (with standard battery)
Operating Temp: -30°C to +60°C
IP Rating: IP54 dust and water resistant
Modulation: 16KΦF3E / 11KΦF3E

Controls and Settings

Front Panel: Power/Volume knob, Channel selector, PTT button, Programmable buttons, LCD display.

Button Functions: PTT (Push-to-Talk), MONI (Monitor), SCAN (Scan control), LAMP (Backlight), PF keys (Programmable functions).

Display: Shows channel number, battery level, transmit indicator, scan status. Settings: Volume, squelch, power level (high/low), scan modes, timeout timer, VOX sensitivity.

Programming the Radio

Requires KPG-89D programming software and programming cable.

Install programming software on PC.
Connect radio to PC using programming cable.
Read current configuration from radio.
Program frequencies, tones, and functions as required.
Write configuration to radio.
Verify programming by testing all functions.

Tip: Backup configuration files for future use and recovery.

Operation

Basic radio operation procedures.

Transmit: Press and hold PTT button, speak clearly into microphone.
Receive: Release PTT button to listen.
Channel selection: Rotate channel knob to desired channel.
Volume adjustment: Rotate volume knob to desired level.
Scan operation: Press SCAN button to start/stop scanning.
Monitor: Press MONI to listen without squelch.
Backlight: Press LAMP to illuminate display.

WARNING! Only transmit on authorized frequencies with proper licenses.

Battery Information

Battery charging and maintenance.

Charging: Use approved Kenwood charger. Initial charge: 8 hours. Normal charge: 6-8 hours. Battery life: Approximately 10 hours typical use. Storage: Store in cool, dry place. Disposal: Recycle according to local regulations.

Care & Maintenance

Clean with dry cloth only; avoid liquids and solvents.

CAUTION! Do not immerse in water. Keep away from extreme temperatures and humidity.

Regulatory Information

FCC Part 90: This device complies with Part 90 of the FCC rules for land mobile radio services. Industry Canada: Complies with RSS-119. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized Kenwood dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery dead/not installed	Charge battery; ensure proper installation.
No transmission	PTT issue/channel setting	Check PTT button; verify channel programming.
Poor reception	Antenna/squelch setting	Check antenna connection; adjust squelch.
No audio	Volume setting/speaker	Increase volume; check speaker.
Battery drains quickly	Old battery/heavy use	Replace battery; reduce transmit power.

Reset: May require reprogramming by qualified technician.

Service: Contact authorized Kenwood service center.