Kenwood TK 3207 User Manual

The Kenwood TK 3207 is a professional UHF two-way radio designed for commercial and industrial use. This portable radio features robust construction, clear audio quality, multiple channel capability, programmable functions, and reliable communication performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Operation 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: UHF Transceiver, LCD Display, Programmable Buttons, Antenna, Battery Pack, Charging Connector, Speaker/Microphone, Belt Clip.

Feature	Description
Frequency Range	UHF 400-470MHz
Channels	Up to 128 programmable channels
Power Output	5W (High), 1W (Low)
Battery	Li-ion 1500mAh (standard)
Display	Backlit LCD with channel info
Programmable Buttons	Multiple function keys for quick access
Scan Function	Programmable scan with priority
VOX	Voice operated transmission
IP Rating	IP54 dust and water resistant
Dimensions	58(W) x 130(H) x 37(D) mm

Installation

Unpack and inspect contents. Install battery and antenna.

Battery Installation: Align battery with radio contacts, slide until it clicks into place.
Antenna Installation: Screw antenna clockwise onto antenna connector until secure.
Belt Clip: Attach belt clip to rear of radio if required.
Charging: Place radio in charging cradle for initial charge.

WARNING! Use only Kenwood approved batteries and accessories. Do not force connections.

First-Time Setup

Power on radio; configure basic settings.

Power On: Turn volume knob clockwise to power on.
Channel Selection: Use channel selector knob to choose desired channel.
Volume Adjustment: Rotate volume knob for comfortable listening level.
Squelch Setting: Adjust squelch to eliminate background noise.
Programming: Use programming software to configure channels and features.

CAUTION! Radio must be programmed by authorized personnel only.

Specifications

Frequency Range: UHF 400-470MHz
Channels: 128 max programmable
Power Output: 5W (High), 1W (Low)
Battery Life: Approx. 10 hours (5-5-90 duty cycle)
Modulation: 16KΦF3E (Digital), 11KΦF3E (Analog)
Operating Temp: -30°C to +60°C
Weight: Approx. 350g (with battery)
Audio Output: 500mW at 10% distortion
Charging Time: Approx. 3 hours (standard charger)

Controls and Settings

Access functions via front panel controls and programmable buttons.

Front Panel: Volume Knob, Channel Selector, Power Button, PTT Button, Programmable Buttons.

Display: Shows channel number, battery status, transmit indicator, scan status. Audio: Volume control, squelch levels, tone settings. Channel: Channel selection, group selection, scan lists. Features: VOX sensitivity, power levels, timeout timer, busy channel lockout.

Connecting Accessories

Speaker Mic: Connect to accessory port. Headset: Use compatible Kenwood headsets. Programming Cable: Connect to PC for configuration.

Ensure radio is powered off before connecting accessories.
Align connector properly with accessory port.
Push firmly until connector clicks into place.
Test accessory function before regular use.

Tip: Use only Kenwood approved accessories for optimal performance.

Basic Operation

Transmit and receive procedures for daily use.

Transmit: Press and hold PTT button, speak clearly into microphone.
Receive: Release PTT button to listen; adjust volume as needed.
Channel Change: Rotate channel selector to desired channel.
Monitor: Press monitor button to temporarily open squelch.
Scan: Activate scan function to monitor multiple channels.
Power Level: Switch between high and low power as required.

WARNING! Transmit only when necessary and follow local regulations.

Advanced Features

Scanning: Programmable scan with priority channel. VOX: Hands-free operation. DTMF: Selective calling and signaling. Privacy: Digital coded squelch. Emergency: Emergency call function.

Care & Maintenance

Clean with soft, dry cloth. Avoid harsh chemicals. Store in dry, cool location.

CAUTION! Do not immerse in water. Avoid extreme temperatures and direct sunlight.

Regulatory Information

FCC Part 90: Certified for land mobile radio service. IC RSS-119: Complies with Canadian requirements. This device may not cause interference and must accept any interference received. For support, visit www.kenwood.com or contact authorized Kenwood dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery/connections	Check battery charge; ensure proper connection; try different battery.
No transmission	PTT/antenna	Check PTT button function; ensure antenna properly attached.
Poor reception	Antenna/location	Check antenna connection; move to better location; check squelch setting.
Battery drains quickly	Battery age/settings	Replace old battery; reduce transmit power; check for stuck PTT.
No audio	Volume/accessory	Check volume setting; verify accessory connection; reset radio.

Reset: Use programming software to reset to factory defaults if needed.

Service: Contact authorized Kenwood service center; www.kenwood.com