Kenwood TK 3300 Manual

The Kenwood TK 3300 is a professional UHF two-way portable radio designed for business and commercial applications. Featuring robust construction, clear audio quality, and versatile programming options, this radio operates in the UHF frequency range with multiple channel capacity, CTCSS/DCS capabilities, and durable design suitable for various working environments. Below are key sections covering safety, features, operation, programming, maintenance, and troubleshooting.

Features at a Glance

Key components: Durable UHF portable radio, LCD display, programmable buttons, antenna, battery pack, and belt clip.

Installation and Setup

Unpack and inspect contents. Install battery and antenna before first use.

1. Battery Installation: Align battery contacts, slide battery onto radio until it clicks.
2. Antenna Installation: Screw antenna clockwise onto antenna connector.
3. Battery Charging: Place radio in charger; ensure charging indicator lights.
4. Power On: Rotate volume knob clockwise to turn on radio.

WARNING! Use only Kenwood-approved batteries and chargers. Do not operate while charging.

Basic Operation

Power on radio; adjust volume and select channels.

1. Power On/Off: Rotate volume knob clockwise to turn on, counter-clockwise to turn off.
2. Volume Control: Rotate volume knob to adjust audio level.
3. Channel Selection: Use channel selector knob or up/down buttons.
4. Transmit: Press and hold PTT button; speak into microphone.
5. Receive: Release PTT button to listen.
6. Monitor: Press monitor button to temporarily disable squelch.

CAUTION! Ensure proper antenna is installed before transmitting.

Specifications

• Frequency Range: UHF 400-470MHz
• Channel Capacity: 128 channels
• Power Output: 5W (High), 1W (Low)
• Battery Life: Approx. 10 hours (typical use)
• Dimensions: 58(W) x 130(H) x 37(D) mm
• Weight: Approx. 350g (with battery)
• Operating Temp: -30°C to +60°C
• IP Rating: IP54/55 dust and water resistant
• Modulation: 16KΦF3E / 11KΦF3E

Controls and Functions

Front Panel: Volume knob, channel selector, PTT button, programmable buttons.

Top Panel: Antenna connector, power/volume knob, channel selector.

Side Buttons: PTT (Push-to-Talk), programmable function buttons, accessory connector. Display: Shows channel number, battery level, transmit indicator, and status icons. Function Buttons: Programmable for scan, monitor, power level, VOX, and other features.

Programming the Radio

Requires KPG-89D programming software and programming cable.

1. Install KPG-89D software on Windows PC.
2. Connect programming cable to radio and PC.
3. Read current data from radio.
4. Program frequencies, tones, and functions.
5. Write data back to radio.
6. Verify programming by testing all channels.

Tip: Backup current programming before making changes.

Battery and Charging

Use only Kenwood-approved batteries and chargers.

1. Charging: Place radio in charger; charging indicator will light.
2. Charging Time: Approx. 6 hours for full charge.
3. Battery Life: Typical 8-10 hours depending on usage.
4. Battery Saving: Enable battery save function in programming.
5. Storage: Store in cool, dry place when not in use.

WARNING! Do not charge battery in extreme temperatures. Replace damaged batteries immediately.

Accessories

Available accessories: Extra batteries, desktop chargers, multi-unit chargers, carrying cases, headsets, speaker microphones, belt clips, and programming cables.

Maintenance and Care

Clean with dry cloth only; avoid liquids and solvents.

CAUTION! Do not disassemble radio. Service by authorized personnel only. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 90 certified for land mobile radio service. Complies with relevant industry standards. This device must accept any interference received. For technical support and service, contact authorized Kenwood dealers or visit www.kenwood.com.

Troubleshooting

Reset: May require reprogramming via software.

Service: Contact authorized Kenwood service center for repairs.