Kenwood TK 3301 Manual

The Kenwood TK 3301 is a professional UHF two-way portable radio designed for commercial and industrial use. Featuring robust construction, multiple channel capability, programmable functions, and reliable communication performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Basic Operation 8. Programming Features 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: UHF transceiver, LCD display, programmable buttons, antenna, battery pack, charger connection.

Feature	Description
Frequency Range	UHF 400-470 MHz
Channels	Up to 128 programmable channels
Output Power	Selectable 5W/1W
LCD Display	Backlit display with channel info
Programmable Buttons	Customizable function keys
Battery Life	Up to 10 hours typical use
Scan Function	Programmable channel scanning
VOX Capability	Voice-activated transmission
CTCSS/DCS	Tone squelch systems
IP Rating	IP54 dust and water resistant

Installation

Unpack and inspect contents. Install battery and antenna.

Battery installation: Align battery contacts, slide onto radio until it clicks.
Antenna installation: Screw antenna clockwise onto antenna connector.
Belt clip: Attach to back of radio if required.
Charging: Place radio in charging cradle or connect charger directly.

WARNING! Use only Kenwood-approved batteries and accessories. Do not use damaged equipment.

First-Time Setup

Power on radio; initialize settings.

Power on: Turn volume knob clockwise; press power button.
Channel selection: Use channel selector knob to choose desired channel.
Volume adjustment: Rotate volume knob to comfortable listening level.
Squelch setting: Adjust squelch control to eliminate background noise.
Programming: Use programming software to configure channels and features.

CAUTION! Radio must be programmed by authorized personnel for proper operation.

Specifications

Frequency Range: UHF 400-470 MHz
Channels: 128 maximum
Output Power: 5W (High), 1W (Low)
Modulation: 16KΦF3E / 11KΦF3E
Battery: 7.4V 1500mAh Li-ion
Dimensions: 58(W) x 130(H) x 37(D) mm
Weight: Approx. 350g with battery
Operating Temp: -30°C to +60°C
IP Rating: IP54

Controls and Settings

Front Panel: Power/Volume knob, Channel selector, PTT button, Programmable buttons, LCD display.

LCD Icons: Battery level, Channel number, TX/RX indicator, Scan status, Power level.

Basic Settings: Volume control, Channel selection, Squelch level, Power level selection. Advanced Settings: CTCSS/DCS codes, Scan lists, Time-out timer, VOX sensitivity, Button programming.

Connecting Accessories

Accessory connector: For external speaker/microphone, programming cable, data applications.

Turn off radio before connecting accessories.
Align accessory connector properly with radio port.
Secure connection by tightening locking mechanism.
Test accessory functionality after connection.

Tip: Use only Kenwood-approved accessories to ensure compatibility and safety.

Basic Operation

Transmitting and receiving procedures.

Transmit: Press and hold PTT button; speak clearly into microphone.
Receive: Release PTT button; listen through speaker.
Channel change: Rotate channel selector knob to desired channel.
Volume adjustment: Rotate volume knob to preferred level.
Monitor: Press monitor button to temporarily open squelch.
Scan: Activate scan function to monitor multiple channels.
Power level: Select high/low power as required.
Battery save: Automatic battery saving when not transmitting.

WARNING! Transmit only when necessary to conserve battery life.

Programming Features

Programmable functions using KPG-89D software.

Channel Programming: Frequency, CTCSS/DCS, Power level, Bandwidth. System Features: Scan lists, Time-out timer, Busy channel lockout, VOX settings. Button Programming: Customize function buttons for quick access to features.

Maintenance & Care

Regular maintenance ensures optimal performance.

Cleaning: Use soft, dry cloth; avoid solvents and chemicals. Battery Care: Charge battery fully before first use; avoid complete discharge. Storage: Store in cool, dry place; remove battery if storing long-term.

CAUTION! Do not disassemble radio; refer servicing to qualified personnel.

Regulatory Information

FCC Part 90: Certified for land mobile radio service. Industry Canada: Complies with RSS-119. This device must accept any interference received, including interference that may cause undesired operation. Copyright © Kenwood Corporation. For support, visit www.kenwood.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged/defective	Charge battery; replace if necessary.
No transmission	PTT button/antenna	Check PTT function; ensure antenna properly connected.
Poor reception	Antenna/squelch setting	Check antenna connection; adjust squelch level.
Battery drains quickly	Battery age/usage	Replace battery; reduce transmission time.
No audio	Volume setting/speaker	Check volume control; test with external speaker.

Reset: Use programming software to reset to factory defaults if required.

Service: Contact authorized Kenwood service center for repairs.