Kenwood TK 3302 Manual

The Kenwood TK 3302 is a professional two-way portable radio designed for commercial and industrial use. This UHF radio features robust construction, clear audio quality, multiple channel capability, programmable functions, and reliable performance in demanding environments. Below are key sections covering safety, features, installation, operation, programming, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Programming 7. Operation 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Durable chassis, LCD display, programmable buttons, antenna, battery pack, charger connection.

Feature	Description
Frequency Range	UHF 400-470MHz
Channels	Up to 128 programmable channels
Output Power	5W (high), 1W (low)
Battery	Li-ion battery pack
Display	LCD with backlight
Programming	PC programmable via KPG-89D software
Scanning	Programmable scan functions
CTCSS/DCS	Tone squelch and digital coded squelch
Dimensions	58W x 130H x 37D mm
Weight	Approx. 380g with battery

Installation

Unpack and inspect contents. Install battery and antenna.

Battery installation: Align battery contacts, slide battery onto radio until it clicks.
Antenna installation: Screw antenna clockwise onto antenna connector.
Belt clip: Attach belt clip to back of radio if required.
Charging: Place radio in charger; ensure charging indicator lights.

WARNING! Use only Kenwood-approved batteries and accessories. Do not force connections.

First-Time Setup

Power on radio; configure basic settings.

Power on: Turn volume knob clockwise; LCD should display channel info.
Channel selection: Use channel selector knob to choose desired channel.
Volume adjustment: Rotate volume knob for comfortable listening level.
Squelch adjustment: Use squelch control to eliminate background noise.
Programming: Connect to PC with programming cable for advanced setup.

CAUTION! Program radio only in safe environments away from RF sources.

Specifications

Frequency Range: UHF 400-470MHz
Channels: 128 max programmable
Output Power: 5W (high), 1W (low)
Battery Life: Approx. 10 hours (5-5-90 duty cycle)
Modulation: 16KΦF3E (FM)
Operating Temp: -30°C to +60°C
Antenna Impedance: 50Ω
Dimensions: 58W x 130H x 37D mm
Weight: Approx. 380g with battery

Controls and Settings

Front Panel: Volume knob, channel selector, PTT button, programmable buttons, LCD display.

Top Controls: Power/volume knob, channel selector, antenna connector.

LCD Display: Shows channel number, battery level, transmit indicator, scan status. Programmable Functions: Monitor, scan, power level, tone encode/decode, emergency call. Audio: Volume control, internal speaker, external speaker/mic jack.

Programming

Requires KPG-89D programming software and programming cable.

Install KPG-89D software on Windows PC.
Connect radio to PC using programming cable.
Read current data from radio.
Program frequencies, tones, power levels, scan lists.
Write data to radio and verify programming.

Tip: Backup current programming before making changes.

Operation

Basic radio operation procedures.

Transmit: Press and hold PTT button; speak clearly into microphone.
Receive: Release PTT button; listen through speaker.
Channel change: Rotate channel selector knob.
Volume adjustment: Rotate volume knob.
Scan: Press programmed scan button to start/stop scanning.
Monitor: Press monitor button to open squelch temporarily.
Power level: Toggle between high/low power if programmed.

WARNING! Transmit only when necessary and authorized.

Maintenance

Regular maintenance ensures optimal performance.

Cleaning: Use soft, dry cloth; avoid liquids.
Battery care: Charge fully before first use; avoid complete discharge.
Antenna inspection: Check for damage; replace if necessary.
Connector cleaning: Keep connectors clean and dry.

CAUTION! Do not disassemble radio; contact authorized service.

Regulatory Information

FCC Part 90 certified for land mobile radio service. This device complies with Part 15 of FCC rules. Operation subject to conditions: device may not cause harmful interference and must accept any interference received. For support, contact Kenwood authorized dealer or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged/defective	Charge battery; replace if necessary.
No transmission	PTT button/programming	Check PTT function; verify programming.
Poor reception	Antenna/range	Check antenna connection; move closer to other station.
No audio	Volume/speaker	Adjust volume; check speaker connection.
Programming failure	Cable/software	Check cable connection; verify software compatibility.

Reset: Use programming software to reset to factory defaults if needed.

Service: Contact authorized Kenwood service center for repairs.