Kenwood TK 3310 User Manual

The Kenwood TK 3310 is a professional UHF two-way radio designed for business and commercial use. This portable radio features 32 channels, 5W output power, robust construction, programmable functions, and advanced communication capabilities. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Programming and Configuration 7. Operation 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: UHF transceiver, LCD display, programmable buttons, antenna, battery pack, and belt clip.

Feature	Description
Frequency Range	UHF 400-470MHz
Channels	32 programmable channels
Output Power	5W (High), 1W (Low)
LCD Display	Backlit display with channel info
Battery	Li-ion battery pack
Programming	PC programmable via KPG-89D software
Scan Function	Programmable scan with priority
VOX	Voice operated transmission
CTCSS/DCS	Tone squelch and digital coded squelch
Dimensions	58(W) x 130(H) x 37(D) mm

Installation

Unpack and inspect contents. Install battery and antenna.

Battery Installation: Align battery contacts, slide battery onto radio until it clicks.
Antenna Installation: Screw antenna clockwise onto antenna connector.
Belt Clip: Attach belt clip to back of radio if required.
Charging: Place radio in charger; ensure charging indicator lights.

WARNING! Use only Kenwood approved batteries and accessories. Do not use damaged batteries.

First-Time Setup

Power on radio; configure basic settings.

Power On: Turn volume knob clockwise to power on.
Channel Selection: Use channel selector knob to choose desired channel.
Volume Control: Adjust volume knob for comfortable listening level.
Squelch Setting: Adjust squelch control to eliminate background noise.
Programming: Use KPG-89D software for channel programming.

CAUTION! Program radio only in safe, non-hazardous environments.

Specifications

Frequency Range: UHF 400-470MHz
Channels: 32 programmable
Output Power: 5W (High), 1W (Low)
Battery Life: Approx. 10 hours (5-5-90 duty cycle)
Modulation: 16KΦF3E (FM)
Antenna Impedance: 50Ω
Operating Temp: -30°C to +60°C
Weight: Approx. 350g (with battery)
Dimensions: 58 x 130 x 37 mm

Controls and Settings

Front Panel: Power/Volume knob, Channel selector, PTT button, Programmable buttons, LCD display.

Button Functions: PTT (Push-to-Talk), MONI (Monitor), SCAN (Scan activation), LAMP (Backlight), Function key for secondary features.

Display: Shows channel number, battery level, transmit indicator, busy channel indicator. Settings: Power levels (High/Low), Time-out timer, Battery save, Scan functions, CTCSS/DCS codes.

Programming and Configuration

Use KPG-89D programming software and cable.

Install KPG-89D software on Windows PC.
Connect programming cable to radio and PC.
Read current configuration from radio.
Program channels, frequencies, and functions.
Write configuration back to radio.

Tip: Always backup current configuration before making changes.

Operation

Basic radio operation procedures.

Transmitting: Press and hold PTT button; speak clearly into microphone.
Receiving: Release PTT button to listen; adjust volume as needed.
Channel Change: Rotate channel selector knob to desired channel.
Scan Operation: Press SCAN button to activate channel scanning.
Monitor: Press MONI button to temporarily open squelch.

WARNING! Transmit only when necessary and authorized.

Advanced Features

VOX (Voice Operated Transmission): Enable for hands-free operation. CTCSS/DCS: Program sub-audible tones for selective calling. Time-out Timer: Prevents extended transmissions. Battery Save: Extends battery life during standby.

Care & Maintenance

Clean with dry cloth only; avoid liquids. Regular battery charging and inspection.

CAUTION! Do not expose to extreme temperatures or moisture. Use only approved chargers.

Regulatory Information

FCC Part 90 certified for land mobile radio service. Complies with relevant telecommunications standards. Copyright © Kenwood Corporation. For support, contact authorized Kenwood dealer or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged or faulty	Charge battery; check battery contacts.
No transmission	PTT button or settings	Check PTT function; verify channel programming.
Poor reception	Antenna or location	Check antenna connection; move to better location.
Cannot program	Cable or software	Verify cable connection; reinstall programming software.
Short battery life	Battery age or settings	Replace battery; enable battery save mode.

Reset: Use programming software to reset to factory defaults if needed.

Service: Contact authorized Kenwood service center for repairs.