Kenwood TK 360G Manual

The Kenwood TK 360G is a professional VHF two-way radio designed for commercial and industrial use. This rugged radio features 16 channels, 5W output power, programmable functions, built-in scrambler, and meets MIL-STD 810 C/D standards for durability. Below are key sections covering safety, features, installation, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Programming the Radio 7. Operation 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 16-channel capacity, MIL-STD 810 C/D compliant, built-in scrambler, programmable functions, LCD display, and rugged construction.

Feature	Description
Frequency Range	VHF 136-174 MHz
Channels	16 programmable channels
Output Power	5W (High), 1W (Low) selectable
LCD Display	Backlit display with channel info
Scrambler	Built-in voice inversion scrambler
Battery	Ni-Cd or Ni-MH battery pack
Antenna	Detachable helical antenna
Programming	PC programmable via KPG-36D software
Dimensions	130mm(H) x 58mm(W) x 37mm(D)
Weight	Approx. 450g with battery

Installation

Unpack and inspect contents. Install battery and antenna.

Battery Installation: Align battery contacts, slide battery onto radio until it clicks.
Antenna Installation: Screw antenna clockwise into antenna connector.
Belt Clip: Attach belt clip to back of radio if required.
Charging: Place radio in charging cradle for initial charge.

WARNING! Do not operate radio while charging. Ensure antenna is properly installed before transmitting.

First-Time Setup

Power on radio; check battery level and basic functions.

Power On: Rotate volume knob clockwise to turn on radio.
Channel Selection: Use channel selector knob to select desired channel.
Volume Adjustment: Rotate volume knob to set audio level.
Squelch Adjustment: Adjust squelch control to eliminate background noise.
Test Transmission: Press PTT button and speak into microphone.

CAUTION! Ensure proper licensing before operating on any frequency.

Specifications

Frequency Range: VHF 136-174 MHz
Channel Capacity: 16 channels
Output Power: 5W (High), 1W (Low)
Modulation: 16KΦF3E
Power Supply: 7.2V DC (battery pack)
Battery Life: Approx. 8 hours (5-5-90 duty cycle)
Operating Temp: -30°C to +60°C
Humidity: 5% to 95% relative humidity
Shock/Vibration: MIL-STD 810 C/D compliant
Dimensions: 130(H) x 58(W) x 37(D) mm

Controls and Settings

Front Panel: Volume control, channel selector, PTT button, power button, LCD display.

Top Panel: Antenna connector, LED indicator, scrambler button.

LCD Display: Shows channel number, battery status, transmit indicator, scrambler status. Volume Control: Rotate to adjust audio level. Channel Selector: Rotate to select programmed channels. PTT Button: Press and hold to transmit, release to receive. Scrambler: Toggle scrambler function on/off. LED Indicator: Green for receive, red for transmit, flashing for low battery.

Programming the Radio

Requires KPG-36D programming software and programming cable.

Install KPG-36D software on Windows PC.
Connect programming cable between radio and PC.
Read current programming from radio.
Configure frequencies, CTCSS/DCS, power levels.
Write new programming to radio.
Verify programming and test all channels.

Tip: Always backup current programming before making changes.

Operation

Basic radio operation procedures.

Power On: Rotate volume knob to turn on radio.
Select Channel: Use channel selector to choose desired channel.
Adjust Volume: Set appropriate listening level.
Transmit: Press and hold PTT button, speak clearly into microphone.
Receive: Release PTT button to listen for responses.
Monitor: Adjust squelch control to eliminate noise when no signal present.
Scrambler: Press scrambler button for secure communications.

WARNING! Transmit only when necessary to conserve battery life.

Advanced Features

Scrambler Operation: Enable voice privacy on compatible channels. CTCSS/DCS: Sub-audible tones for selective calling. Time-out Timer: Prevents extended transmissions. Battery Saver: Extends battery life during standby. Priority Channel: Monitors priority channel while on other channels.

Care & Maintenance

Clean exterior with soft, dry cloth. Avoid chemicals and solvents.

CAUTION! Do not immerse radio in water. Keep away from extreme temperatures and moisture.

Regulatory Information

FCC Part 90 certified for land mobile radio service. This device complies with Part 15 of FCC Rules. Operation subject to condition that device does not cause harmful interference. Copyright © Kenwood Corporation. For technical support, contact authorized Kenwood dealer or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery discharged or faulty	Charge battery; replace if necessary.
No transmission	PTT button or programming	Check PTT function; verify channel programming.
Poor reception	Antenna or squelch setting	Check antenna connection; adjust squelch.
No audio	Volume setting or speaker	Adjust volume; check speaker connection.
Battery drains quickly	Battery age or high usage	Replace battery; reduce transmit time.

Reset: Requires reprogramming via KPG-36D software.

Service: Contact authorized Kenwood service center for repairs.