kenwood tk 705d manual

The Kenwood TK-705D is a VHF mobile transceiver designed for commercial and professional use, featuring 45W output power, 256 channels, IP54/55 dust and water resistance, MIL-STD 810G compliance for durability, wide frequency range (136-174 MHz), programmable functions, large LCD display, and versatile mounting options. Below are key sections for safety, features, installation, programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Programming and Operation 8. Advanced Features 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main transceiver unit, control head, microphone, mounting bracket, DC power cable, and connection cables.

Feature	Description
Frequency Range	136-174 MHz VHF
Output Power	45W (high), 25W (mid), 5W (low)
Channels	256 programmable channels
IP Rating	IP54/55 dust and water resistant
Display	Large backlit LCD with channel info
Audio Output	3W internal speaker
Power Input	13.8V DC negative ground
Programming	KPG-112D software required
Scanning	Programmable scan functions
Emergency Features	Emergency alarm and call functions

Installation

Unpack and inspect all components. Choose suitable mounting location in vehicle.

Mount transceiver: Secure main unit in well-ventilated area using mounting bracket.
Install control head: Mount control head within easy reach of operator.
Connect power: Connect red wire to positive (+), black wire to negative (-) vehicle battery terminals.
Connect antenna: Use appropriate VHF antenna with PL-259 connector.
Connect accessories: Attach microphone and external speaker if required.

WARNING! Ensure proper fuse protection (15A recommended). Do not install near airbags or safety systems.

First-Time Setup

Power on transceiver; initialize basic settings.

Power connection: Verify 13.8V DC connection with proper polarity.
Antenna check: Ensure antenna is properly connected before transmitting.
Basic programming: Use KPG-112D software to program initial channels and settings.
Volume/Squelch: Adjust volume knob and squelch level for clear reception.
Channel selection: Use channel selector knob to navigate programmed channels.

CAUTION! Do not transmit without proper antenna connection to prevent damage.

Specifications

Frequency Range: 136-174 MHz VHF
Output Power: 45W (max), programmable power levels
Channels: 256 programmable channels
Modulation: 16KΦF3E (FM)
Power Supply: 13.8V DC ±15% negative ground
Current Drain: 12A max at 45W transmit
Operating Temp: -30°C to +60°C
Dimensions: Main unit: 140W × 40H × 156D mm
Weight: Approx. 1.2 kg
Compliance: MIL-STD 810G, IP54/55

Controls and Settings

Front Panel: POWER/VOLUME knob, Channel selector, 16-key keypad, LCD display, Function keys, PTT button.

Microphone: PTT, channel up/down, programmable buttons, hook.

Display Indicators: Channel number, transmit/receive, busy channel, power level, scan status. Menu Settings: Channel edit, scan setup, tones, power settings, display options, reset functions.

Connecting Accessories

External Speaker: Use 8-ohm external speaker jack. Data Port: For programming cable connection. Microphone: Standard Kenwood microphone connector.

Turn off power before connecting accessories.
Use genuine Kenwood accessories for optimal performance.
Ensure proper cable routing to avoid interference.

Tip: Use ferrite cores on accessory cables to reduce RF interference.

Programming and Operation

Requires KPG-112D programming software and programming cable.

Install software: Install KPG-112D on Windows computer.
Connect radio: Use programming cable to connect radio to computer.
Read current data: Read existing configuration from radio.
Program channels: Enter frequency, CTCSS/DCS, power settings for each channel.
Write to radio: Upload new configuration to radio.
Verify operation: Test all programmed channels and functions.

WARNING! Always backup current configuration before making changes.

Advanced Features

Scan Functions: Priority scan, programmable scan lists. Tones: CTCSS/DCS encode/decode. Emergency Features: Emergency alarm and call functions. Data Capabilities: Basic data transmission support.

Maintenance & Care

Regular cleaning with dry cloth. Check connections periodically. Store in dry environment when not in use.

CAUTION! Do not use chemicals or solvents for cleaning. Keep away from extreme temperatures.

Regulatory Information

FCC Part 90 certified for land mobile radio service. Complies with relevant industry standards. Manufacturer: Kenwood Corporation. For technical support and service, contact authorized Kenwood dealers or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection/fuse	Check DC power connection; verify fuse integrity; check polarity.
No transmission	Antenna/PTT	Verify antenna connection; check PTT function; confirm channel programming.
Poor reception	Antenna/squelch	Adjust squelch level; check antenna and cables; verify frequency programming.
No audio	Volume/speaker	Check volume setting; verify speaker connection; test external speaker.
Programming failure	Cable/software	Verify programming cable connection; reinstall software; check COM port settings.

Reset: Menu > Reset to factory defaults if required.

Service: Contact authorized Kenwood service center; www.kenwood.com