kenwood ts 2000 manual download

The Kenwood TS-2000 is a multi-band, multi-mode transceiver featuring HF/6m/2m/70cm coverage, built-in antenna tuner, DSP filtering, multiple operating modes (SSB, CW, AM, FM, Digital), cross-band repeater function, and extensive connectivity options. Below are key sections for features, installation, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating Modes 8. Advanced Functions 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Multi-band transceiver, Remote Control, Antenna connectors, Data ports, Microphone jack, Speaker output.

Feature	Description
Frequency Coverage	HF/6m/2m/70cm bands
Operating Modes	SSB, CW, AM, FM, Digital modes
Built-in Antenna Tuner	Automatic antenna matching
DSP Filtering	Digital Signal Processing for enhanced reception
Cross-band Repeater	Dual-band simultaneous operation
Data Ports	For computer control and digital modes
Memory Channels	99 memory channels with scan function
Power Output	Adjustable from 5W to 100W
Display	Multi-function LCD with backlight
Power Requirements	13.8V DC nominal

Installation

Unpack and inspect contents. Place on stable surface with adequate ventilation.

Connect antenna: Use appropriate coaxial cable to antenna connector.
Connect power: Use 13.8V DC power supply with proper polarity.
Connect microphone: Plug into MIC jack on front panel.
Connect accessories: Use data ports for computer interface and external devices.

WARNING! Ensure proper grounding and use appropriate fuses. Avoid RF exposure hazards.

First-Time Setup

Power on transceiver; follow initial configuration steps.

Set operating frequency: Use VFO knob or direct frequency entry.
Configure mode: Select appropriate operating mode for band.
Adjust power output: Set appropriate power level for operation.
Program memories: Store frequently used frequencies in memory channels.

CAUTION! Verify antenna matching before transmitting at full power.

Specifications

Frequency Range: 1.8-54 MHz, 144-148 MHz, 430-450 MHz
Modes: LSB/USB/CW/AM/FM/FSK/Digital
Power Output: 5-100W adjustable (HF/6m), 5-50W (VHF/UHF)
Receiver: Double conversion superheterodyne
DSP Functions: Noise reduction, filter shaping, notch filter
Antenna Connectors: SO-239 for HF/6m, N-type for VHF/UHF
Power Supply: 13.8V DC ±15%
Dimensions: 240W × 95H × 260D mm
Weight: 4.5 kg

Controls and Settings

Front Panel: POWER, VOLUME, SQUELCH, VFO/MR, MODE, FUNCTION keys.

Remote: All front panel functions accessible via remote head option.

Menu System: Extensive menu for DSP settings, memory management, repeater functions, system configuration. Quick access to filter settings, noise reduction, AGC timing, and display options.

Connecting Accessories

Data Port: For computer control (CAT interface). ACC Socket: For external amplifiers, tuners. Speaker/Headphone: External audio output.

Turn off transceiver before connecting accessories.
Use appropriate cables and connectors.
Configure interface settings in menu system.

Tip: Use shielded cables for data connections to reduce interference.

Operating Modes

Supports multiple operating modes for different applications.

SSB: For voice communication, select LSB/USB as appropriate.
CW: For Morse code operation, adjust keyer speed and weight.
FM: For repeater and simplex operation on VHF/UHF.
Digital: For packet, RTTY, and other digital modes.
Cross-band: Simultaneous receive/transmit on different bands.

WARNING! Ensure proper licensing for operating frequencies and modes.

Advanced Functions

DSP Filtering: Adjustable bandwidth and shape for each mode. Auto Tuner: Automatic antenna matching for HF bands. Memory Scan: Scan stored memory channels. Split Operation: Independent transmit/receive frequencies.

Maintenance

Keep unit clean and dry. Use soft cloth for cleaning; avoid chemicals. Periodically check connectors and cables for damage.

CAUTION! Disconnect power before cleaning. Do not use compressed air near controls.

Regulatory Information

FCC Part 97: Complies with amateur radio service rules. CE compliant for European markets. Copyright © Kenwood Corporation. For technical support and service, contact authorized Kenwood service centers or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection/fuse	Check power cable and connections; verify fuse condition.
No transmit	Settings/antenna	Check mode selection; verify antenna connection and matching.
Poor reception	Antenna/DSP settings	Adjust antenna; optimize DSP noise reduction and filters.
Overheating	Ventilation/power	Ensure adequate ventilation; reduce power output if necessary.
Memory loss	Backup battery	Replace internal backup battery; reprogram memories.

Reset: Menu > System > Reset to factory defaults if needed.

Service: Contact authorized Kenwood service center for repairs.