Kenwood TS2000X Manual

The Kenwood TS2000X is a high-performance HF/VHF/UHF transceiver offering all-mode operation across multiple amateur radio bands. With advanced DSP technology, comprehensive filtering options, and versatile connectivity, this radio is designed for serious amateur radio operators. Below are key sections covering features, installation, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating Modes 8. Advanced Functions 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main transceiver unit, Front panel controls, Microphone connector, Antenna ports, Data interface, Power connector.

Feature	Description
Frequency Coverage	HF: 1.8-30MHz, VHF: 50-54MHz, 144-148MHz, UHF: 430-450MHz
Operating Modes	SSB, CW, AM, FM, FSK, Digital modes
Power Output	HF: 100W, VHF: 50W, UHF: 35W (adjustable)
DSP Functions	Digital filtering, noise reduction, automatic notch filter
Memory Channels	200 memory channels with alphanumeric labeling
IF DSP	24-bit DSP for superior signal processing
Antenna Tuner	Built-in automatic antenna tuner
Data Interface	CI-V compatible for computer control
Power Requirements	13.8V DC ±15%
Display	Multi-function LCD with backlight

Installation

Unpack and inspect contents. Ensure proper ventilation and stable mounting.

Connect power supply: Use 13.8V DC power source with adequate current capacity.
Connect antenna: Use appropriate coaxial cable to antenna connector.
Connect microphone: Plug microphone into front panel connector.
Connect accessories: Attach external speakers, data cables as needed.
Grounding: Ensure proper grounding for safety and performance.

WARNING! Use proper fusing and ensure adequate ventilation. Avoid exposure to moisture.

First-Time Setup

Power on transceiver; initialize settings.

Set operating frequency: Use VFO knob or direct frequency entry.
Configure mode: Select SSB, CW, FM, or other desired mode.
Adjust power output: Set appropriate power level for band and mode.
Program memories: Store frequently used frequencies in memory channels.
Set DSP parameters: Configure filters and noise reduction settings.

CAUTION! Verify antenna matching before transmitting at full power.

Specifications

Frequency Range: HF: 1.8-30MHz, VHF: 50-54MHz/144-148MHz, UHF: 430-450MHz
Modes: LSB, USB, CW, AM, FM, FSK, Digital
Power Output: HF: 100W, VHF: 50W, UHF: 35W
Sensitivity: SSB: 0.25μV, CW: 0.15μV, FM: 0.32μV
Selectivity: DSP-based adjustable filters
Memory: 200 channels with alphanumeric tags
Power Supply: 13.8V DC, 22A max
Dimensions: 240W × 105H × 310D mm
Weight: 5.2 kg

Controls and Settings

Front Panel: POWER, VFO/MR, A/B, F1-F5 function keys, AF/RF gain, SQL, NB, NR.

Main Controls: VFO knob, Mode selection, Band selection, Memory recall, Function keys.

Menu Settings: DSP filters (width, shift), Noise reduction, Notch filter, AGC settings, Display options, Keyer speed, RIT/XIT offsets. Operating Modes: SSB (LSB/USB), CW (with break-in), AM, FM, FSK. Memory Management: Store/recall frequencies, mode, filter settings per channel.

Connecting Accessories

Microphone: Front panel 8-pin connector. Antenna: SO-239 connector. Data: CI-V interface. External speakers: Rear panel jack.

Turn off power before connecting accessories.
Use appropriate cables and connectors for each accessory.
Configure CI-V address for computer control (default: 88h).
Connect external amplifier if required (use ACC connector).

Tip: Use high-quality coaxial cable for antenna connections to minimize loss.

Operating Modes

Supports all major amateur radio operating modes.

SSB Operation: Select LSB/USB, adjust RF power, use clarifier for fine tuning.
CW Operation: Enable CW mode, set keyer speed, use break-in operation.
FM Operation: Select FM mode, set squelch, use repeater offsets.
Digital Modes: Connect data interface, configure FSK settings.
Memory Operation: Recall stored frequencies and settings.
Scan Functions: Programmable band scan and memory scan.
Dual Watch: Monitor two frequencies simultaneously.
Split Operation: Transmit and receive on different frequencies.

WARNING! Ensure proper licensing for intended operating bands and modes.

Advanced Functions

DSP Filtering: Adjustable bandwidth and shift for each mode. Automatic Antenna Tuner: Built-in tuner for HF bands. Noise Reduction: DSP-based NR for improved reception. Notch Filter: Automatic and manual notch for interfering signals.

Maintenance

Keep unit clean and dry. Periodically check connections and cables.

CAUTION! Disconnect power before cleaning. Use only dry cloth; no liquids or chemicals.

Regulatory Information

FCC Part 97: Certified for amateur radio service. CE compliant for European markets. Copyright © Kenwood Corporation. For technical support and service, contact authorized Kenwood service centers or visit www.kenwood.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection/fuse	Check power cable; verify fuse; ensure proper voltage.
No transmit	Settings/antenna	Check PTT operation; verify antenna connection; check SWR.
Poor reception	Antenna/connections	Verify antenna system; check coaxial connections; adjust squelch.
Memory lost	Backup battery	Replace internal backup battery; reprogram memories.
Overheating	Ventilation/power	Ensure adequate ventilation; reduce power output; check duty cycle.

Reset: Hold F and POWER during startup for factory reset.

Service: Contact authorized Kenwood service center; www.kenwood.com