Kenwood Tumble Dryer KVT1W Manual

The Kenwood KVT1W is a compact tumble dryer featuring multiple drying programs, adjustable temperature settings, child safety lock, anti-crease function, and energy-efficient operation. With a 7kg capacity, this vented dryer offers various drying cycles for different fabric types and includes safety features like overheating protection and cool-down phase. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Instructions 7. Maintenance & Cleaning 8. Safety Features 9. Care Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, lint filter, drum light, adjustable feet, vent hose connector, and multiple drying programs.

Feature	Description
Drying Capacity	7kg maximum load capacity
Drying Programs	Cotton, Synthetic, Delicate, Quick Dry, Anti-crease
Temperature Settings	High, Medium, Low, Cool Air
Timer	Up to 180 minutes adjustable timer
Child Lock	Prevents accidental program changes
Anti-crease Function	Tumbles periodically after cycle completion
Door Opening	Reversible door for flexible installation
Filter Indicator	Alerts when lint filter needs cleaning
End of Cycle Buzzer	Audible signal when drying complete
Energy Rating	Class B energy efficiency

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet and ventilation.

Position dryer: Ensure adequate clearance (minimum 5cm) from walls and furniture.
Install vent hose: Connect vent hose to rear exhaust and route to external ventilation.
Level the dryer: Adjust feet until dryer is stable and level.
Connect to power: Plug into grounded 230V AC, 50Hz outlet.

WARNING! Ensure proper ventilation to prevent moisture buildup. Do not use extension cords.

First-Time Setup

Before first use, perform initial setup and test run.

Remove packaging: Remove all transit bolts and packaging materials.
Clean lint filter: Ensure lint filter is clean and properly installed.
Test empty cycle: Run a 15-minute cycle without laundry to remove manufacturing residues.
Set preferences: Configure buzzer volume and default settings if available.

CAUTION! Never operate without lint filter installed. Ensure door is properly closed.

Specifications

Capacity: 7kg
Power Supply: 230V AC, 50Hz
Power Consumption: 2000W maximum
Dimensions (HxWxD): 85cm x 60cm x 55cm
Weight: 35kg
Drum Material: Stainless steel
Programs: 5 main drying programs + additional options
Timer Range: 10-180 minutes
Noise Level: 65dB maximum
Energy Class: B

Controls and Settings

Control Panel: POWER button, PROGRAM selector, TIMER dial, START/PAUSE, CHILD LOCK, OPTION buttons.

Program Selection: Cotton (high heat), Synthetic (medium heat), Delicate (low heat), Quick Dry (30 min), Anti-crease (tumble only). Temperature Settings: Adjustable per program. Timer: Set drying duration from 10 to 180 minutes. Options: Child lock, buzzer on/off, anti-crease function.

Operating Instructions

Daily operation steps for optimal drying performance.

Load laundry: Do not exceed 7kg maximum capacity.
Select program: Choose appropriate program for fabric type.
Set timer: Adjust drying time based on load size and moisture level.
Start cycle: Press START/PAUSE to begin drying.
Monitor progress: Display shows remaining time and cycle status.
Remove laundry: Promptly remove items when cycle completes to minimize wrinkling.
Clean filter: Clean lint filter after every use.

Tip: Sort laundry by fabric type and thickness for even drying.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Lint filter: Clean after every use by rinsing under water and drying completely.
Drum: Wipe interior with damp cloth; leave door open between uses to prevent odors.
Exterior: Clean with mild detergent and soft cloth.
Vent system: Check vent hose monthly for blockages; clean annually.
Condenser: If applicable, clean condenser unit every 3 months.

WARNING! Always unplug before cleaning. Never use abrasive cleaners.

Safety Features

Multiple safety mechanisms protect users and prevent damage.

Overheat protection: Automatically shuts off if temperature exceeds safe limits
Child lock: Prevents program changes during operation
Door safety switch: Stops operation when door is opened
Thermal fuse: Additional protection against overheating
Cool-down phase: Tumbles without heat at end of cycle to cool laundry

Care Instructions

Proper care extends appliance life and maintains performance.

Unplug when not in use for extended periods. Store in dry location. Avoid exposure to direct sunlight or extreme temperatures. Have unit serviced annually by qualified technician.

CAUTION! Do not dry rubber, plastic, or foam items. Remove all objects from pockets before drying.

Regulatory Information

CE certified: Complies with European safety standards. Energy labeling according to EU regulations. Manufactured according to ISO 9001 quality standards. Copyright © 2025 Kenwood; all rights reserved. For support, visit www.kenwood.com or contact customer service at +44 (0)1234 567890.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power supply/door	Check power connection; ensure door is fully closed; reset circuit breaker.
Poor drying performance	Lint filter/overload	Clean lint filter; reduce load size; check vent hose for blockages.
Unusual noises	Foreign objects/bearings	Check for coins or objects in drum; contact service if bearings worn.
Error codes displayed	Various faults	Consult error code list in manual; reset unit; contact service if persistent.
Overheating	Vent blockage	Clean vent system; ensure adequate airflow around dryer.

Reset: Unplug for 5 minutes then restart if unit malfunctions.

Service: +44 (0)1234 567890; www.kenwood.com