Kenwood Tuner Manual

The Kenwood Tuner is a high-performance audio component featuring AM/FM radio reception, digital tuning with preset stations, RDS (Radio Data System) functionality, multiple audio outputs, remote control capability, and advanced signal processing. Designed for integration with home audio systems, it offers crystal-clear reception and user-friendly operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio Systems 7. Tuning and Presets 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital tuner with LCD display, Remote Control, Antenna inputs, Audio outputs, Power connector.

Feature	Description
AM/FM Tuner	Digital tuning with auto-seek and manual tuning
RDS Function	Displays station information and program details
Preset Stations	30 station memory (20 FM, 10 AM)
Audio Outputs	RCA line outputs for connection to amplifier
Antenna Inputs	75-ohm coaxial for FM, wire terminal for AM
Headphone Jack	3.5mm stereo output for private listening
Remote Sensor	Infrared receiver for remote control operation
Display Dimmer	Adjustable display brightness
Auto Power Off	Energy-saving automatic shutoff
Tuning Modes	Auto seek, manual tuning, preset recall

Installation

Unpack and inspect contents. Place on stable surface in well-ventilated area.

Connect antennas: FM antenna to 75-ohm terminal; AM antenna to wire terminals.
Connect to amplifier: Use RCA cables from audio outputs to amplifier inputs.
Connect power: Plug AC adapter into power input and wall outlet.
Position unit: Ensure adequate ventilation and avoid heat sources.

WARNING! Do not place near heat sources or in humid environments. Ensure proper ventilation.

First-Time Setup

Power on tuner; follow initial setup procedure.

Auto-tune stations: Press AUTO button to scan and store available stations.
Set display language: In SYSTEM menu, select preferred language.
Adjust audio settings: Use AUDIO menu for bass, treble, and balance.
Program presets: Store favorite stations in memory locations.

CAUTION! Ensure stable power supply; use surge protector for best performance.

Specifications

Tuning Range: FM 87.5-108 MHz, AM 530-1710 kHz
Preset Memory: 30 stations (20 FM, 10 AM)
Audio Output: 2V RMS (fixed output)
Signal-to-Noise: 80 dB (FM stereo)
Total Harmonic Distortion: 0.1% (FM)
Selectivity: 70 dB (FM alternate)
Power Requirements: 120V AC, 60Hz, 15W
Dimensions: 17.1" W × 4.3" H × 12.8" D
Weight: 8.8 lbs

Controls and Settings

Front Panel: POWER, TUNING knob, BAND selector, PRESET buttons, DISPLAY, MENU.

Remote: POWER, Numeric buttons, BAND, PRESET, TUNING, MUTE, DISPLAY, MENU.

Tuning: Auto seek, manual tuning, preset selection. Audio: Bass, treble, balance, loudness. System: Display dimmer, auto power off, reset function. RDS: PS (Program Service), RT (Radio Text), CT (Clock Time).

Connecting to Audio Systems

Audio Outputs: RCA jacks for connection to amplifier/receiver.

Turn off all components before connecting.
Connect RCA cables from tuner outputs to amplifier AUX/TUNER inputs.
Connect antennas properly for optimal reception.
Connect power and turn on components.

Tip: Use high-quality cables for best audio performance and reception.

Tuning and Presets

Supports manual and automatic tuning with station memory.

Select band: Press BAND to choose FM or AM.
Auto tuning: Press TUNE + or - for automatic station seeking.
Manual tuning: Rotate TUNING knob for precise frequency selection.
Store presets: Tune to desired station, press and hold PRESET button.
Recall presets: Press numbered PRESET buttons for quick station access.
RDS information: View station name and program details on display.

WARNING! Ensure proper antenna connection for optimal reception quality.

Advanced Features

RDS Function: Displays station information, program type, and clock time. Auto Power Off: Energy-saving automatic shutdown after specified time. Display Dimmer: Adjustable brightness for different lighting conditions.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior; avoid liquids and chemicals.

CAUTION! Do not use abrasive cleaners; keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Kenwood Corporation. All trademarks property of their respective owners. For technical support, visit www.kenwood.com or contact 1-800-536-9663.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound output	Connection/volume	Check audio cable connections; ensure amplifier is on and volume up.
Poor reception	Antenna placement	Reposition antennas; ensure proper connection; check for interference.
Display not working	Power/settings	Check power connection; adjust display dimmer setting.
Presets lost	Power interruption	Re-program stations; ensure continuous power supply.
Remote not functioning	Batteries/obstruction	Replace batteries; ensure clear path to sensor; check distance.

Reset: Menu > System > Reset to restore factory settings.

Service: 1-800-536-9663; www.kenwood.com